SR-8
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunroof Motor
5. Sunroof Motor
A: REMOVAL
CAUTION:
Fully close sunroof when removing sunroof mo-
tor.
When removing clip, use great care to not dam-
age the roof trim.
1) Completely close the sunroof.
2) Disconnect the ground cable from battery.
3) Remove roof trim.
Roof Trim.>
4) Disconnect harness connector (A) and remove
sunroof motor mounting screw (B) and nut (C).
B: INSTALLATION
CAUTION:
Be careful not to move the sunroof cable when
installing sunroof motor.
1) Install sunroof motor.
2) Connect sunroof motor harness connector and
then connect battery ground cable.
3) Reset the sunroof motor.
JUSTMENT, Sunroof Motor.>
4) Check sunroof operation with the following pro-
cedure.
5) Install the roof trim.
TION, Roof Trim.>
C: ADJUSTMENT
1) Reset the sunroof motor.
(1) Close the sunroof lid completely, and then
push the switch to close for more than 1 second.
(At this time, the sunroof operates 50 mm (1.97
in) each intermittently. And also the switch is
needed to push for several times.)
(2) Open the sunroof lid approx. 400 mm (15.75
in).
(3) Close the sunroof lid completely, and then
push the switch to close for more than 1 second.
(Sunroof operates automatically by performing
this operation.)
D: INSPECTION
1. AUTO REVERSE FUNCTION
1) Open the sunroof lid.
2) While the sunroof lid closing automatically, press
the switch to open and check if auto reverse func-
tion operates properly.
3) Check that the sunroof opens 150 mm (5.91 in)
by auto reverse function operated.
CAUTION:
Do not check the auto reverse operation with
pinching any object.
NOTE:
Auto function is canceled if auto reverse function
operates more than five times.
Reset if auto function is canceled.
ADJUSTMENT, Sunroof Motor.>
Checking order Switch position
(1) Completely close sunroof. Closed
(2) Open sunroof 500 mm (19.7 in) away
from completely closed position.Open
(3) Completely open sunroof. Open
(4) Close sunroof 200 mm (7.87 in) from
completely closed position.Closed
(5) Completely close sunroof. Closed
SR-00016
(A)
(C)
(B)
(C)
