2004 PORSCHE CAYENNE display

[x] Cancel search: display

Page 148 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 148
Multi-Purpose Display and Instruments
Changing language for displaysNote
Changing the language will affect the entire multi-
purpose display.
Changing units for displaysAvailable categories and un

Page 149 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Multi-Purpose Display and Instruments
149
Overview of warning messagesIf a warning message appears, always refer to the corresponding chapters in this Owner’s Manual. 
Warning messages are issued on

Page 150 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 150
Multi-Purpose Display and Instruments
Immobilizer active Have the fault remedied at an authorized Porsche dealer.Check left static cornering
lightCheck bulb.Check right static cornering
lightCheck

Page 151 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Multi-Purpose Display and Instruments
151
Check passenger seat setting Weight sensing is impaired on the passenger’s seat (Advanced Airbag).
Correct the seating position, set the backrest upright, d

Page 152 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 152
Multi-Purpose Display and Instruments
No monitoring
System learningAfter the tire type and size are selected in the tire pressure menu, Tire Pressure Monitoring re-learns 
the tires.Wheel change?

Page 153 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Multi-Purpose Display and Instruments
153
Oil pressure too low Immediately stop in a suitable place and switch engine off. Do not continue driving.
Check engine oil level. Add oil if necessary. 
Do no

Page 154 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 154
Multi-Purpose Display and Instruments
PSM off Porsche Stability Management was switched off.PHC unavailable The Porsche Drive-off Assistant (manual transmission) is not available.Brake booster fau

Page 155 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Multi-Purpose Display and Instruments
155
Shift not possible;
Speed too highTiptronic S: When changing between Low Range and High Range, the limit speed (Low Range program) 
must not be exceeded.Shift