2004 PORSCHE CAYENNE instrument panel

[x] Cancel search: instrument panel

Page 152 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 152
Multi-Purpose Display and Instruments
No monitoring
System learningAfter the tire type and size are selected in the tire pressure menu, Tire Pressure Monitoring re-learns 
the tires.Wheel change?

Page 153 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Multi-Purpose Display and Instruments
153
Oil pressure too low Immediately stop in a suitable place and switch engine off. Do not continue driving.
Check engine oil level. Add oil if necessary. 
Do no

Page 154 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 154
Multi-Purpose Display and Instruments
PSM off Porsche Stability Management was switched off.PHC unavailable The Porsche Drive-off Assistant (manual transmission) is not available.Brake booster fau

Page 155 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Multi-Purpose Display and Instruments
155
Shift not possible;
Speed too highTiptronic S: When changing between Low Range and High Range, the limit speed (Low Range program) 
must not be exceeded.Shift

Page 156 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 156
Multi-Purpose Display and Instruments
Rear right door open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).Hood open
All unlocked doors and lids are displayed whe

Page 159 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual Driving and Driving Safety
159
Ignition lock position 1 - Ignition onfTurn ignition key to position 1.
Note on operation
All electrical equipment can be switched on.
The warning lights light up for a

Page 162 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 162
Driving and Driving Safety
Parking BrakeThe parking brake acts on the rear wheels and 
serves to secure the car while parked.
fUse the parking brake only after the vehicle 
has come to a full stop

Page 164 of 379

PORSCHE CAYNNE 2004 1.G Owners Manual 164
Driving and Driving Safety Brake system warning light
You can check the functionality of the brake sys-
tem warning light by switching the ignition to the 
“On” position and verifying that the