DIAGNOSTIC PROCEDURE 3
(Door unlock sensor check)
CHECK DOOR UNLOCK SENSOR INPUT SIG-
NAL.
Remove time control unit from fuse block.
Note: Junction block (J/B) is very fragile.
TCU should be removed carefully to avoid
breaking the locking bars.
Check continuity between time control unit termi-
nalsq
25,q35,q36and ground.
NG
EOK
Door unlock sensor
is OK.
CHECK DOOR UNLOCK SENSOR.
1. Disconnect door unlock sensor connector.
2. Check continuity between door unlock sensor terminals.
OK
ENG Replace door
unlock sensor.
Check the following:
IDoor unlock sensor ground circuit
I Harness for open or short between control unit
and door unlock sensor
Terminals
Condition Continuity
!@
Driver
side door
U35Ground Locked No
Unlocked Yes
Passen- ger
side door
U36Ground Locked No
Unlocked Yes
Rear door
U25Ground Locked No
Unlocked Yes
Terminals Condition Continuity
Front with
super lock and rear q
2-
q5Locked No
Unlocked Yes
Front with- out super lock q
2-
q4Locked No
Unlocked Yes
YEL342D
YEL905E
H
H
THEFT WARNING SYSTEM
Trouble Diagnoses (Cont'd)
EL-271
http://vnx.su/
