2004 NISSAN TERRANO remote control

AUTO DOOR LOCK OPERATION
Auto lock function signal is sent for operation when any of the following signals are not sent within 5 minutes
after the unlock signal is sent from the multi-remote controller:
Iwhen door switch is turned ON for open
I when the ignition switch is turned ON
I when the lock signal is sent from the multi-remote controller
I when ignition switch is inserted in ignition key cylinder
MULTI-REMOTE CONTROLLER ID CODE ENTRY
A maximum of four remote controllers can be entered.
To enter ID code entry, the following signals must be input to the time control unit.
IIgnition switch (ON)
I Signal from remote controller
For detailed procedure, refer to ªID Code Entry Procedureº in EL-215.
MULTI-REMOTE CONTROL SYSTEM
System Description (Cont'd)
EL-203
http://vnx.su/

Schematic
YEL159D
MULTI-REMOTE CONTROL SYSTEM
EL-204
http://vnx.su/

Wiring Diagram Ð MULTI Ð
LHD MODELS
YEL747E
MULTI-REMOTE CONTROL SYSTEM
EL-205
http://vnx.su/

LHD MODELS
YEL161D
MULTI-REMOTE CONTROL SYSTEM
Wiring Diagram Ð MULTI Ð (Cont'd)EL-206
http://vnx.su/

LHD MODELS
YEL748E
MULTI-REMOTE CONTROL SYSTEM
Wiring Diagram Ð MULTI Ð (Cont'd)EL-207
http://vnx.su/

LHD MODELS
YEL163D
MULTI-REMOTE CONTROL SYSTEM
Wiring Diagram Ð MULTI Ð (Cont'd)EL-208
http://vnx.su/

RHD MODELS
YEL749E
MULTI-REMOTE CONTROL SYSTEM
Wiring Diagram Ð MULTI Ð (Cont'd)EL-209
http://vnx.su/

RHD MODELS
YEL165D
MULTI-REMOTE CONTROL SYSTEM
Wiring Diagram Ð MULTI Ð (Cont'd)EL-210
http://vnx.su/