General Specifications
Engine model KA24DE VG33E YD25DDTi TD27 ZD30DDT QD32
Transmission model FS5W71C FS5R30A FS5W71C FS5R30A
Clutch model 240 250 240 250
Clutch master cylinder
Inner diameter mm (in) 15.87 (5/8)
Clutch operating cylinder
Inner diam-
eterLHD mm (in) 17.46 (11/16) Ð 19.05 (3/4) 17.46 (11/16) 19.05 (3/4) 17.46 (11/16)
RHD mm (in) 19.05 (3/4)
Clutch disc
Facing size mm (in)
(Outer dia. x inner dia. x
thickness)240 x 150 x 3.5
(9.45 x 5.91 x
0.138)250 x 160 x 3.8
(9.84 x 6.30 x
0.150)250 x 160 x 3.5
(9.84 x 6.30 x
0.138)240 x 160 x 3.5
(9.45 x 6.30 x
0.138)250 x 160 x 3.5
(9.84 x 6.30 x
0.138)250 x 160 x 3.5
(9.84 x 6.30 x
0.138)
Thickness of disc assembly 8.1 (0.319) 8.3 (0.327) 8.1 (0.319) 7.8 (0.307) 8.1 (0.319)
With load mm (in)With 4,903 N
(500 kg, 1,103 lb)With 6,472 N
(660 kg, 1,455 lb)With 7,350 N
(750 kg, 1,652 lb)With 4,903 N
(500 kg, 1,103 lb)With 7,350 N
(750 kg, 1,652 lb)With 5,884 N
(600 kg, 1,323 lb)
Clutch cover
Full load2WD
N (kg, lb)4,903 (500,
1,103)Ð7,360 (751,
1,655)3,923 (400, 882) Ð Ð
4WD
N (kg, lb)4,659 (475,
1,047)6,472 (660,
1,455)7,360 (751,
1,655)Ð7,360 (751,
1,655)5,394 (550,
1,213)
Inspection and Adjustment
Engine model KA24DE VG33E YD25DDTi TD27 ZD30DDT QD32
Clutch model 240 250 240 250
Clutch disc
Wear limit of facing surface
to rivet head mm (in)0.3 (0.012)
Runout limit of facing
mm (in)1.0 (0.039) 0.7 (0.028) 1.0 (0.039) 0.7 (0.028)
Distance of runout check
point (from the hub center)
mm (in)115 (4.53) 120 (4.72) 120 (4.72) 115 (4.53) 120 (4.72)
Maximum backlash of spline
(at outer edge of disc)
mm (in)1.0 (0.039)
Clutch cover
Diaphragm spring height
mm (in)38.5 (1.516) 37.5 (1.476) 40.5 (1.594) 38.5 (1.516) 40.5 (1.594) 38.5 (1.516)
Uneven limit of diaphragm
spring toe height mm (in)0.7 (0.028)
SERVICE DATA AND SPECIFICATIONS (SDS)
CL-6002
