2004 MERCEDES-BENZ CLK CABRIOLET light

125
Controls in detail
Operating system
6 Select the len gth of time you wish the
lights to remain on by pressing the
æ orç button. You can select
the following:
!0s, delayed switch-off is deacti-
vated
!
5s,10 s,15 sor20 s, delayed
switch-off is acti vated Vehicle submenu
You can access the
Vehiclesubmenu
via
the
Settings...menu. You can set the
general behaviour of the vehicle in the
Vehiclesubmenu.
You can make the following settings: Setting the stati
onselection
You can use the
Audio Search functionto
set whether you wish to search for a new
station every time you operate the radio or
wh ether it should select a station which
has already been stored ( =pa ge 113).
6 Movethe bar to the
Vehi clesubmenu
using theæ orç button.
6 Press the jork button repeat-
edly until you see the
Audio Search
function
message in the display.
The current setting ishighlighted. 6
Select the preset station selection
using the æorç button. You
can select the following:
!
freq., the next frequency is
selected
!
memory, the next stored station is
selected
Set automatic locking
You can use this function to activate or
deactivate the automatic central locking. If
the automatic locking is activated, your
vehicle will lock centrally from a speed of
about 15 km /h. For further information,
see Automatic lockin g(
=page 88).
6 Move the bar tothe
Vehiclesubmenu
using the æorç button. Fu
nction Page
Set permanent Speedtronic 211
Set the station selection (radio) 125
Set autom
atic locking 125 P54.30-5222-31
==209en_d2.boo Seite
125 Dienstag, 25. Mai 2004 7:26 19

126 Controls in detail
Operating system
6
Press the jork button repeat-
edly until you see theAutomatic door
lock
message.
The current setting is highlighted.
6 Switch the
Automati cdoor lock onor
offby pressing the æorç but-
ton. Heater submenu*
You can only se
ethe
Heatersubmenu if
your vehicle has auxi liary heating* or a die-
sel engine. You can access the
He atersub-
menu via the
Settings...menu. You can make the following sett
ings:
Selecting the switch-on time
You can select up to three swi tch-on times
with the
Auxiliary heating function.
However, only one switch-on time may be
activated at any one time. You can set the
exact switch-on time using the other func-
tions in the
Heatersubmenu.
If you have selected a switch-on time, the
yellow indicator lamp lights up in the auxil-
iary heating switch ( =pa ge 176). You
can set the tem perature using:
! Thermatic automatic air cond itioning
( =
pa ge 154)
! Thermotronic* intelligent air condition-
ing ( =page 164)
You can switch off the auxiliary heating
using the remote control.
The auxil iary he ating switches off aut omat-
ically after 50 minutes. You can have this
time changed. To do this, consult your
nearest Mercedes-Benz Service Centre.
P54.30-5223-31 Fun
ction Pa
ge Select the switch-on time 126
Set the hours 127
Set the
minutes 127
Select heater booster settings 128
G
Risk of fire and poi soning Do not switch on the auxiliary heating:
!
at the filling stat ion
! in confined spaces with out an ext raction
system, e.g. in the garage
Ot herwise, you could en danger yourself and
others. 209en_d2.boo Seite
126 Dienstag, 25. Mai 2004 7:26 19

127
Controls in detail
Operating system
6 Move the bar to theHeatersubmenu
us ing the æ orç button.
6 Press the jork button repea t-
edly until you see the
Auxiliary heat.
message.
The current setting is highlighted.
6 Select the time when the auxiliary heat-
ing is to switch on using the æor
ç button. You can select the follow-
ing:
!
"Time one", "Time two" or
"Tim ethree",
the time is selected
!
Timer off, the auxiliary heating
does not switch on automatically Setting the hours
You will only see this function if
you have
selected a switch-on time. Here you may
enter the hour when the auxiliary heating is
to be activat ed.
6 Movethe bar to the
Heat ersubmenu
using theæ orç button.
6 Press the jork button repeat-
edly
until yousee theSw.-on time X
Set hours
display message.
The edi tmark appears on the hour fig-
ure.
6 Set the hour when the auxiliary heating
is to preheat by pressing the æor
ç button. Sett
ing the minutes
You wil lonly see this function if you have
selected a switch-on time. Here you may
enter the exa cttim ew hen the aux iliary
heating is to be activated.
6 Move the bar to the
Heatersubmenu
using the æorç button.
6 Press the jork button repeat-
edly until you see the
Sw.-on time X
Se tm inutes
mes sage.
The edit mark appears on the minutes
figur e.
6 Set the minute time when the auxiliary
heating is to preheat by pressing the
æ orç button.
P54.30-5224-31 P54.30-5225-31 P54.30-5226-31209en_d2.boo Seite
127 Dienstag, 25. Mai 2004 7:26 19

128 Controls in detail
Operating system
Sel
ecting the heater booster settings
You can only see this function ifyour vehi-
cle has a diesel engine. You can use the
heater booster to warm up the vehicle inte-
rior to the temperature you require more
qui ckly.
6 Move the bar to theHeatersubmenu
using the æorç button.
6 Press the jork button repeat-
edly until you see the
Function Heater
booster
message.
The current setting is highlighted. 6
Select the function you require using
the æ orç button. You can
select the following:
!
Automatic
The heater booster is switched on if
the outside temperature is below
8° C and the coolant temperature
is less than 70 °C. It switches itself
off again at higher temperature s.
!
Off
The heater booster is switched off.
Th is saves fuel. !
off by
AC-OFF
You can switch the heater booster
on and off using the ACOFF
(econ-
omy mode) button on the Thermatic
(= page 154) or Thermotronic*
(= page 164) system.
Switched off:
Th eindi cat or la mp in the
AC OFF
button comes on.
Switched on:
Th eindi cat or la mp in the
AC OFF
button is not lit.
The heater booster is switched on if
the outside temperature is below
8° C and the coolant temperature
is less than 70 °C. It switches itself
off again at higher temperatures.
P54.30-5227-31 209en_d2.boo Seite
128 Dienstag, 25. Mai 2004 7:26 19

129
Controls in detail
Operating system Convenience* submenu
You can access theConven
iencesubmenu
vi a the
Settings...menu. You can set cer-
tain convenience features in the
Conven-
ience
submenu.
You can make the following settings:
Activating the easy-entry feature*
You may activate or dea ctivat ethe easy-
entry feature using this function. Depend-
ing on your setting, the steering wheel
moves up and the dri ver's seat moves back
to help you to get out of the vehi cle when
you: !
remove the key from the ignition lock
! open the driv er's door and the key is in
position 0or 1in the ignition lock
On ce you have got into the vehicle, the
steering wheel and the seat return to the
last position set (
= page 97) when you: !
close the driver's door and
! insert the key into th eignition lock
i Press one of the fo llowing switches to can-
ce l the adjus tment procedu re:
! The seat adjustment switch (
=page 25)
! The steering columnadjustment swi tch
( = page 30)
! The memor ybutton (= page 97)
6 Move the bar to the
Conveniencesub-
menu using the æorç button.
6 Pres s the j ork button repeat-
edly until you see the
Function Easy-
entry feature
message.
The current setting is highlighted.
6 Select the function you requi reusing
the æ orç button. Fu
nction Page
Activate the easy-entry feature* 129
Set the key dependence* 130
Set the parking position for the
exterior mirrors* 130 G
Risk of injury Make sure that nobody can become trapped
wh
en you activate the easy- entry feature.
If danger threat ens, press one of the follow-
in g sw itch es:
! The seat adjustment switch ( =page 25)
! The ste ering column adjustm ent swi tch
( =
page 30)
! The memory button ( =page 97)
Never leave children unsupervised in the
ve hic le. They could open the driver 'sdoor
and thereby unintentionally activate the
eas y-entry feature.
P54.30-5228-31209en
_d2.boo Seite 129 Dienstag, 25. Mai 2004 7:26 19

130 Controls in detail
Operating system
You can select the following settings
for the easy-entry feature:
!off
The easy-entry feature is deacti-
vate d:
!
Steering col.
Only the steering column is moved.
!
Steer.co l.+seat
The steering column and the seat
are moved.
Sett ing the key dependence
This function allo wsyou to determine
whether stored settings for the seat, steer-
ing wheel and mirrors are stored as key-
dependent settings ( =page 97).
6 Move the bar to the
Conveniencesub-
menu using the æorç button.
6 Pres s the j ork button repeat-
edly until you see the
Key-dependent
message. The current setting is highlighted.
6 Switch the
Key- dependentsettingonor
offusing the æorç button.
Setting the parking position for the exte-
rio rmir rors
The
Mirror adjustment parking aidfunc-
tion allows you to determine whether the
exterior mirror on the front-passenger side
sho uld tilt downwards when parking with
reverse gear engaged ( =page 150).
6 Move the bar to the
Conveniencesub-
menu using the æorç button. 6
Press the jork button repea t-
edly until you see the
Mirror adjust-
me nt parking aid
message.
The current setting is highlighted.
6 Switch the
Mirror adjustment parking
ai d
functiononoroffby pressing the
æ orç button.
Folding in the exterior mirrors when
locking *
You can determine whether the exterior
mirrors should be folded in when you lock
the vehicle by using the
Fold in mirrors
when locking
function. The exterior mir-
rors will fol dback out again when you
switch on the ignition.
P54.30-5229-31 P54.30-5230-31209en_d2.boo Seite
130 Dienstag, 25. Mai 2004 7:26 19

131
Controls in detail
Operating system i
If you have switched onthis function and
folded in the exteri ormirrors using the button on
the centre console, themi rrors will not be folded
ou twhen the ignition is switched on. It isthen
only possible to fold out the mi rrors using the
button on the centre console.
6 Move the bar to theConveniencesub-
menu using the æorç button.
6 Press the korj button repea t-
edly until you see the
Fold in mirr ors
wh en locking
message inthe displ ay.
The current setting is highlighted.
6 Switch the Mirror setting when parking
function
onoroffusing the æor
ç button. You can call up statistical data for your
vehicle
inthe Trip computer menu.
You can call up the following information: Con
sumptio nstatistics after start
i Whenyou call up the trip computer again, it
displays the consumption statistics after start
first.
6 Press the ÿorè button repeat-
edly until you see the
After startmes-
sage in the display.
1 Short total distance recorder
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
5 Distance driven since start Trip computer menu
Function Page
Consumption statistics after
start 131
Consumption statistics since
the
last reset 132
Ca
llup the range 132 P54.30-5231-31209en_d2.boo Seite
131 Dienstag, 25. Mai 2004 7:26 19

148 Controls in detail
Good visibility
You will find information about the wind-
screen wipers and adj
usting the mirrors in
the "Getting started" section ( =page 31).
You will find information about mist edup
windscreens (= pages 159 and 169) and
demisting ( =pa ges 159 and 169) in the
"Thermatic" and "Thermotronic" sections.
The switch is located on the left next to the
steering wheel.
1 Headlamp cleaning 6
Make sure that the ignition isswitched
on.
6 Briefly press switch 1.
The headlamps are cleaned with a high-
pressur ewater jet. Rear-view mirror,
manual anti-da zzle
1 Anti-dazzle lever
6 Flick over anti-dazzl elever 1.
The rear-view mirror goes into anti-daz-
zle mode. Automatic anti-da
zzle mirrors*
The driver's side exterior mirror and the
rear-view mirror adjust automatically if:
! the ign ition is swi tched on and
! light from headlamps falls onthe sen-
sor in the rea r-view mirror
The mirrors do not go into anti-da zzle
mode when:
! reverse gear is engaged
! the interior lighting is switched on Good visi
bility Headlamp cleaning system*
P
82.10-2887-31 neu Mirrors
P68.40-2050-31 209en_d2.boo Seite
148 Dienstag, 25. Mai 2004 7:26 19