2004 Lexus IS300 Electrical Components / LEXUS 2004 IS300 OWNER'S MANUAL (OM53461U)

OCCUPANT RESTRAINT SYSTEMS
162
SV16144
CAUTION
When using the top strap, be sure to run it through
between the seatback and the luggage cover by
hooking it on the anchor. Hooking the top strap on the
anchor by running it through over the luggage cover
may cause death or serious injury to a child due to
abnormal moving of the child restraint system in case
of sudden braking or a collision.
SV16160
Symbol


1Symbol mark 2Anchor bracket
Use the anchor bracket located behind the rear seat on the
floor to attach the top strap.
Anchor brackets are installed for each rear seating position.
This symbol indicates the locations of anchor brackets.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
163
SV16163
TO USE THE CENTER ANCHOR BRACKET
1. Remove the cover of the center anchor bracket.
SV16162a

Center seat position 1Unlock
1. While pushing the knob, slide the knob, then release
the lock on both sides and remove the luggage cover.
2. Lower the head restraint.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
164
SV16111
3. Fix the child restraint system with the seat belt.
4. Latch the hook onto the anchor bracket and tighten the
top strap.
For instructions to install the child restraint system, see ºChild
restraint systemº on page 141.
CAUTION
Make sure the top strap is securely latched, and check
that the child restraint system is securely by pushing
and pulling it in different directions. Follow all the
installation instructions provided by its manufacturer.
SV16154a

1Lock
5. Replace the luggage cover and slide the knob while
pushing the knob, then securely lock the luggage cover.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
165
SV16121

Side seat position
1. Remove the head restraint.
SV16161a

1Unlock
2. While pushing the knob, slide the knob, then release
the lock on both sides and remove the luggage cover.
SV16120
3. Fix the child restraint system with the seat belt.
4. Latch the hook onto the anchor bracket and tighten the
top strap.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
166For instructions to install the child restraint system, see ºT
ypes
of child restraint systemº on page 143.
CAUTION
 Make sure the top strap is securely latched, and
check that the child restraint system is secure by
pushing and pulling it in different directions.
 Follow all the installation instructions provided by its
manufacturer.SV16155a

1Lock
5. Replace the luggage cover and slide the knob while
pushing the knob, then securely lock the luggage cover.
SV16145
6. Replace the head restraint.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
167
Using a top strap (SportCross: Type B)
SV16113
Follow the next procedure for a child restraint system that
requires the use of a top strap.
SV16144
CAUTION
When using the top strap, be sure to run it through
between the seatback and the luggage cover by
hooking it on the anchor. Hooking the top strap on the
anchor by running it through over the luggage cover
may cause death or serious injury to a child due to
abnormal moving of the child restraint system in case
of sudden braking or a collision.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
168
SV16159
Symbol


1Symbol mark 2Anchor bracket
Use the anchor bracket located behind the rear seat on the
floor to attach the top strap.
Anchor brackets are installed for each rear seating position.
This symbol indicates the locations of anchor brackets.
SV41029
TO USE THE ANCHOR BRACKET
1. Pull up the deck board.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
169
SV41030
2. Take off the hook at the rear of the deck board.
3. Lift up the back side of the board and secure the board
by hooking it at the top of the back door opening with the
hook at the edge of the strap.
Make sure the board is secured and does not fall down.
SV16149
4. Remove the cover of the center anchor bracket.
5. Lower the center deck board to the lowest position.
See ºIn order to expand the luggage spaceº on page 80 for the
procedure to lower the deck board.
03 07.09