2004 ISUZU TF SERIES window

8A-320 ELECTRICAL-BODY AND CHASSIS
This photo is based on RHD
DRIVER SEAT SIDE POWER WINDOW &
DOOR LOCK SWITCH
(4 DOORS MODEL)
Removal
1. Disconnect the battery ground cable.
2. Removes the screw in pull cup with the tip of a screwdriver.
3. Remove the switch bezel by pushing the spring with the tip
of a screwdriver.
4. Disconnect the connector.

ATTENTION:
When removing a switch bezel lift from the front in the
bezel.
It follows the front with the screwdriver.
The clip has broken when lifting from the rear in the bezel.


Installation
To install, follow the removal steps in the reverse order.

This photo is based on RHD


FRONT PASSENGER’S POWER WINDOW
& DOOR LOCK SWITCH
(4 DOORS MODEL)
Removal
1. Disconnect the battery ground cable.
2. Removes the screw in pull cup with the tip of a screwdriver.
3. Remove the switch bezel by pushing the spring with the tip
of a screwdriver.
4. Disconnect the connector.

ATTENTION:
When removing a switch bezel lift from the front in the
bezel.
It follows the front with the screwdriver.
The clip has broken when lifting from the rear in the bezel.



Installation
To install, follow the removal steps in the reverse order.


REAR POWER WINDOW & DOOR LOCK
SWITCH-LH & RH
Removal
1. Disconnect the battery ground cable.
2. Removes the screw in pull cup with the tip of a screwdriver.
3. Remove the switch bezel by pushing the spring with the tip
of a screwdriver.
4. Disconnect the connector.

ATTENTION:
When removing a switch bezel lift from the front in the
bezel.
It follows the front with the screwdriver.
The clip has broken when lifting from the rear in the bezel.

8A-322 ELECTRICAL-BODY AND CHASSIS


DRIVER SEAT SIDE POWER WINDOW
MOTOR
Removal
1. Window Regulator ASM

Refer to the removal steps of the WINDOW
REGULATOR/POWER WINDOW MOTOR in Section
10 “BODY”.
2. Power Window Motor

Loosen the fixing bolts to remove the power windo
w
motor from the regulator.



Installation
To install, follow the removal steps in the reverse order.



FRONT PASSENGER’S POWER WINDOW
MOTOR
Removal
1. Window Regulator ASM

Refer to the removal steps of the WINDOW
REGULATOR/POWER WINDOW MOTOR in Section
10 “BODY”.
2. Power Window Motor

Loosen the fixing bolts to remove the power windo
w
motor from the regulator.



Installation
To install, follow the removal steps in the reverse order.




REAR POWER WINDOW MOTOR-LH &
RH
Removal and Installation
Refer to the “DRIVER SEAT SIDE POWER WINDOW
MOTOR” removal and installation steps in this section.

ELECTRICAL-BODY AND CHASSIS 8A-323
INSPECTION AND REPAIR

B-8


Power Window Relay
Check continuity between the relay terminals.
2- 1......................... No continuity
(When battery voltage is applied between
3 and 4)
2- 1......................... Continuity






Harness side
D-20 D-5


Driver Seat Side Power Window & Door Lock
Switch
1. Harness Side Connector Circuit
Disconnect the switch connector, and check voltage and
continuity between the harness side connector terminals as
shown in the following table.


Terminal
No. Wire
color Connecting to Check item Connectin
g terminal Check condition Standard
6 G/R Power window
relay Voltage 6-Ground Starter SW “ON” Approx.
12V
7 BR/R
Power window
8 BR/W motor

3 B Ground Continuity 3-Ground - Continuity






Harness side
D-10


Front Passenger’s Power Window & Door Lock
Switch
1. Harness Side Connector Circuit
Disconnect the switch connector, and check voltage and
continuity between the harness side connector terminals as
shown in the following table.

Continuity
- 7-8 Continuity

8A-324 ELECTRICAL-BODY AND CHASSIS
Terminal
No. Wire
color Connecting to Check item Connectin
g terminal Check condition Standard
11 G/R Power window
relay Voltage 11-Ground Starter SW “ON” Approx.
12V
12 BR/R
Power window
10 BR/W motor

5 B Ground Continuity 5-Ground - Continuity






Harness side
D-12 D-16


Rear Power Window Switch-LH & RH
1. Harness Side Connector Circuit
Disconnect the switch connector, and check voltage and
continuity between the harness side connector terminals as
shown in the following tables.


D-12 (RR-LH)
Terminal
No. Wire
color Connecting to Check item Connectin
g terminal Check condition Standard
6 G/R Power window
relay Voltage 6-Ground Starter SW “ON” Approx.
12V
8 BR/R
Power window
7 BR/W motor

3 B Ground Continuity 3-Ground - Continuity
D-16 (RR-RH)
Terminal
No. Wire
color Connecting to Check item Connectin
g terminal Check condition Standard
6 G/R Power window
relay Voltage 6-Ground Starter SW “ON” Approx.
12V
8 BR/R
Power window
7 BR/W motor

3 B

4 B

Continuity - 12-10 Continuity
Continuity Continuity 8-7
-
Continuity Continuity 8-7
-
Ground Continuity
3-1
Continuity -

ELECTRICAL-BODY AND CHASSIS 8A-325




Harness side
D-5

Driver Seat Side Power Window Motor
1. Driver Seat Side Power Window & Door Lock Switch
Connector Circuit
Disconnect the switch connector, apply the battery voltage
(12V) to the harness side connector terminals and check
operation.

Connecting terminals
Operation
7 (BR/R) 8 (BR/W) direction
- + DOWN
+ - UP



2. Driver Seat Side Power Window Motor Connector
Circuit
Disconnect the switch connector, apply the battery voltage
(12V) to the motor side connector terminals and check
operation.

Connecting terminals
Operation
1 2 direction
+ - DOWN
- + UP

8A-326 ELECTRICAL-BODY AND CHASSIS




Harness side
D-10

Front Passenger’s Power Window Motor
1. Front Passenger’s Power Window Switch & Door Lock
Switch Connector Circuit
Disconnect the motor connector, apply the battery voltage
(12V) to the harness side connector terminals and check
operation.

Connecting terminals
Operation
12 (BR/R) 10 (BR/W) direction
- + DOWN
+ - UP


2. Front Passenger’s Power Window Motor Connector
Circuit
Disconnect the switch connector, apply the battery voltage
(12V) to the motor side connector terminals and check
operation.

Connecting terminals
Operation
1 2 direction
+ - DOWN
- + UP

ELECTRICAL-BODY AND CHASSIS 8A-327




Harness side
D-12

Rear Passenger’s Power Window Motor-LH
1. Rear Power Window Switch-LH Connector Circuit
Disconnect the motor connector, apply the battery voltage
(12V) to the harness side connector terminals and check
operation.

Connecting terminals
Operation
8 (BR/R) 7 (BR/W) direction
- + DOWN
+ - UP


2. Rear Power Window Motor-LH Connector Circuit
Disconnect the switch connector, apply the battery voltage
(12V) to the motor side connector terminals and check
operation.

Connecting terminals
Operation
1 2 direction
+ - DOWN
- + UP

8A-328 ELECTRICAL-BODY AND CHASSIS




Harness side
D-16

Rear Power Window Motor-RH
1. Rear Power Window Switch-RH Connector Circuit
Disconnect the motor connector, apply the battery voltage
(12V) to the harness side connector terminals and check
operation.

Connecting terminals
Operation
8 (BR/R) 7 (BR/W) direction
- + DOWN
+ - UP


2. Rear Power Window Motor-RH Connector Circuit
Disconnect the switch connector, apply the battery voltage
(12V) to the motor side connector terminals and check
operation.

Connecting terminals
Operation
1 2 direction
+ - DOWN
- + UP