TF-106
TRANSFER MOTOR
Revision: August 20072004 QX56
TRANSFER MOTORPFP:00000
Removal and InstallationEDS0018R
REMOVAL
1. Disconnect transfer motor harness connector.
2. Remove breather pipe from transfer motor.
3. Remove bolts to detach transfer motor.
NOTE:
After removing transfer motor, be sure to replace O-ring with
new one.
INSTALLATIONEDS0018S
1. Apply ATF or petroleum jelly to new O-ring.
NOTE:
Do not reuse O-ring.
2. Align width across flat-notch with oil pump groove, and install
transfer motor.
3. Tighten bolts.
4. Install breather pipe to transfer motor.
5. Connect transfer motor harness connector.
SDIA2133E
Transfer motor bolts : 45 N·m (4.6 kg-m, 33 ft-lb)
SDIA2185E
