TROUBLE DIAGNOSIS FOR SELF-DIAGNOSTIC ITEMS
ACS-41
[ICC]
C
D
E
F
G
H
I
J
L
MA
B
ACS
Revision: 2004 November 2004 FX35/FX45
DTC 11 CONTROL UNITAKS006YX
1. DIAGNOSTIC CHECK
1. Are any items other than “DTC 11 CONTROL UNIT” indicated on self-diagnosis display?
YES or NO
YES >> Repair or replace applicable item. Erase DTC and perform ICC system running test. Then perform
self-diagnosis of ICC system again.
NO >> Replace ICC unit. Erase DTC and perform ICC system running test. Then perform self-diagnosis
of ICC system again.
DTC 20 CAN COMM CIRCUITAKS006YY
1. CHECK CAN COMMUNICATION
With CONSULT-II
1. Perform self-diagnosis.
2. Print self-diagnostic result.
>> After printing self-diagnostic result, go to “CAN system”. Refer to LAN-4, "
Precautions When
Using CONSULT-II" .
90 STOP LAMP RLY FIX×× ×Normally open terminal of stop
lamp relay is stuck.ACS-50
92 ECM CIRCUIT××××
ECM malfunction
Accelerator pedal position sensor
malfunction
ICC unit malfunctionACS-54
96 NP RANGE×××
Park/neutral position switch har-
ness is open or shorted.
Park/neutral position switch mal-
function.
TCM malfunctionACS-55
97 AT CIRCUIT×××TCM malfunctionACS-56
98 GEAR POSITION×××
TCM malfunction
AT turbine revolution sensor mal-
function
AT vehicle speed sensor mal-
functionACS-56
102 RADAR STAIN×× ×ICC sensor body window has
contamination.ACS-57
103 LASER SENSOR FAIL×× ×ICC sensor internal malfunctionACS-58
104 LASER AIMING INCMP×× ×Laser beam aiming of ICC sensor
is not adjusted.ACS-58
107 LASER COMM FAIL×× ×
CAN data received by ICC sen-
sor is strange (from ICC unit,
combination meter or ECM).ACS-58
109 LASER HIGH TEMP×× ×Temperature around ICC sensor
is excessively high.ACS-58
DTC
No.CONSULT-II screen termsICC sys-
tem
warning
lampFail-safe
Malfunctions detected where...Refer-
ence
page Vehicle-
to-vehi-
cle dis-
tance
control
modeConven-
tional
(fixed
speed)
cruise
control
modeBrake
assist
(with pre-
view
function)