2004 FIAT STILO key

CONNECT Nav+
69
“Dial” function
The “Dial” function fig. 46enables
the user to enter the list of stored fre-
quent numbers. After selecting an en-
try of the list with the encoder 14-
fig. 1, start the call by pushing button
ß8-fig. 1; active screen becomes the
one shown in fig. 42. Press “ENTER”
15-fig. 1to display detailed informa-
tion about selected name and number
and the icons “Call” and “Delete”
fig. 47.
To call the selected number proceed
as follows:
– select the “Call” key rotating the
encoder 14-fig. 1, e and pressing “EN-
TER” to confirm 15-fig. 1;
– push button
ß8-fig. 1.To delete the selected number from
the list proceed as follows:
– select “Delete” icon rotating the
encoder 14-fig. 1, a confirmation box
with “YES” - “NO” fig. 48will come
up;
– rotate the encoder 14-fig. 1, and
select “YES”; all the numbers below
the deleted one are moved up by one
position automatically.
IMPORTANT“Delete” shall be
used specially when the “Frequent
numbers” list is full (9 numbers stored)
and you want to enter a new number.“New entry” function
“New entry” icon key is used to copy
an entry from the directory.
To copy an entry from the directo-
ry and add it to the “Frequent num-
bers” list proceed as follows:
– rotate the encoder 14-fig. 1to se-
lect the “New entry” icon;
– press “ENTER” to confirm 15-fig. 1.
If the list is full (9 numbers), then “New
entry” icon is disabled;
– the display shows a keypad to be
used to type the desired number or the
names stored in the directory fig. 49.
fig. 47
F0C4043g
fig. 48
F0C4044g
fig. 46
F0C4042g

CONNECT Nav+
70
Type-in or search as required by se-
lecting the first letters of the name
with the encoder 14-fig. 1and then
press “ENTER” to confirm 15-fig. 1.
If the user tries to add an already ex-
isting number to the “Frequent num-
bers” list, the display will show the al-
ready stored entry.“Order” function
“Order” function fig. 50allows
arrangements of the entries in the
“Frequent Numbers” list.
To move an entry from position “3”
to position “1” for example, proceed
as follows:
– rotate the encoder 14-fig. 1to se-
lect the “Order” key and then press
“ENTER” to confirm 15-fig. 1;
– select the number in position “3”
with the encoder 14-fig. 1and then
press “ENTER” to confirm 15-fig. 1;
– move selected number from posi-
tion “3” to “1” by rotating the en-
coder 14-fig. 1 then press “ENTER”
15-fig. 1to store the new position.“Last numbers
received” FUNCTION
“Last numbers received” pops up the
list of the last 10 calls received. The list
shows the name (if stored in the di-
rectory) and the phone number rele-
vant to the most recently received
callsfig. 51.
The list is managed and updated by
the system automatically.
fig. 49
F0C4190g
fig. 50
F0C4046g
fig. 51
F0C4047g

CONNECT Nav+
71
To call directly one of the entries in
the list proceed as follows:
– select an entry in the list by rotat-
ing the encoder 14-fig. 1;
– push
ß8-fig. 1to start the call
(seefig. 42).After selecting the required entry,
pushing on “ENTER” 15-fig. 1 opens
a window with detailed information
regarding selected name and number
fig. 52. Keys “Call” and “Store” are
available on the display:
– rotate the encoder 14-fig. 1to se-
lect “Call” and press “ENTER” to con-
firm 15-fig. 1: system starts the call to
the displayed number;
– rotate the encoder 14-fig. 1to se-
lect “Store” and press “ENTER” to
confirm 15-fig. 1: the system stores
the current name in the directory.
If the entry is already present in the
directory, “Store” key is disabled.
“Last numbers
called” FUNCTION
“Last numbers called” pops up the
list of the last 10 made calls. The list
shows the name (if stored in the di-
rectory) and the phone number rele-
vant to the most recently made calls
fig. 53.
The list is managed and updated by
the system automatically.
To call directly one of the entry in
the list proceed as follows:
– select an entry in the list by rotat-
ing the encoder 14-fig. 1;
– push
ß8-fig. 1to start the call
(see fig. 42).
fig. 52
F0C4048g
fig. 53
F0C4191g

CONNECT Nav+
72
After selecting the required entry,
pushing on “ENTER” 15-fig. 1opens
a window with detailed information
regarding selected name and number
fig. 54. Keys “Call” and “Store” are
available on the display:
– rotate the encoder 14-fig. 1to se-
lect “Call” and press “ENTER” to con-
firm 15-fig. 1: system starts the call to
the displayed number;
– rotate the encoder 14-fig. 1to se-
lect “Store” and press “ENTER” to
confirm 15-fig. 1: the system stores
the current name in the directory.
If the entry is already present in the
directory, “Store” key is disabled.“Director y”
FUNCTION
“Directory” function makes access
to an electronic directory of person-
al phone numbers and names.
– rotate the encoder 14-fig. 1to se-
lect “Directory” and press “ENTER”
to confirm 15-fig. 1; the screen
shown is that in fig. 55with the fol-
lowing available keys: “Dial”, “Add”,
“Hear voice directory”, “Delete voice
directory” and a list with the first
items of the directory.“Dial” icon key
“Dial” icon key is used to select a di-
rectory phone number.
Rotate the encoder 14-fig. 1, to
choose “Dial” and press “ENTER” to
confirm 15-fig. 1; the display shows
the keypad, the editing box and the list
of stored names fig. 56.
fig. 55
F0C4049g
fig. 56
F0C4193g
fig. 54
F0C4192g

CONNECT Nav+
73
The keypad on the right has the fol-
lowing functionalities:
– alphanumeric characters (including
space);
– string or last entered character
deletion;
– active list: enter a character
selecting it by rotating the encoder
14-fig. 1and confirming it by pressing
“ENTER” 15-fig. 1, the system
searches and displays automatically the
first stored entry, in the relevant da-
ta base, that begins with the same let-
ter. Proceeding with the editing box
composition, as soon as the system
finds an entry present in the data base,
selection moves automatically to the
directory list; press “ENTER” to con-
firm 15-fig. 1;
– fast data input: to speed up data in-
put, the system provides immediate
positioning to the bottom and to the
top of the list setting respectively be-
fore and after the last character by ro-
tating the encoder 14-fig. 1.The keypad includes the following characters:
To compose the following charac-
ters: À Á Â Ã Ä Å È É Ê Ë Ì Í Î Ï Ò
Ó Ô Õ Ö Ù Ú Û Ü Y´
Ÿ Ñ, com-
bined use of the following symbols:
´ ` ¨ ^ ° ~is required.
Example: if the user selects Eand
then ¨the two characters are replaced
by their corresponding single charac-
ter Ë.
Blank and symbols , - _ ‘ ( ) are word
separator characters.After selecting “List” by rotating the
encoder 14-fig. 1and confirming with
“ENTER”15-fig. 1:
– the keypad disappears and an en-
try of the list can be selected fig. 57;
a scrolling lift key appears on the left
when the list is shown and the items
cannot be displayed together, the lift
indicates the focus position in the dis-
played position;
– after selecting the required entry,
press button
ß8-fig. 1to start the
call;
AB C D E F G H I J K L M NO P QR S T U VWX Y Z
0123456789ÇØÆ. , -_‘ ( ) ´ `¨^°~

CONNECT Nav+
74
– pressing “ENTER” 15-fig. 1takes
to a window with detailed information
about selected name and number.
Icons “Call”, “Change”, “Delete” and
“Save in ..” are available on the display
fig. 58.IMPORTANT A SIM card element
cannot be associated to a voice sample.
“Call”: rotating the encoder 14-
fig. 1to select this key and pressing
“ENTER” to confirm 15-fig. 1, starts
call to the selected number; the dis-
play goes back to “call in progress”
screen.
“Change”: rotating the encoder 14-
fig. 1to select this key and pressing
“ENTER” to confirm 15-fig. 1, it is
possible to change the name, the
phone number and the relevant voice
sample. “Location” cannot be changed
fig. 59. “Delete”: clears off a directory entry.
– rotate the encoder14-fig. 1, to se-
lect “Delete”; a confirmation box with
“YES” - “NO” fig. 60will come up;
– select “YES” by rotating the en-
coder 14-fig. 1;
– press “ENTER” to confirm 15-
fig. 1; during deleting operation the
display shows “Please wait …” then
goes back to main directory screen.
fig. 57
F0C4051g
fig. 58
F0C4052g
fig. 59
F0C4053g
fig. 60
F0C4054g

CONNECT Nav+
75
“Save in ...”: selecting this icon by ro-
tating the encoder 14-fig. 1and press-
ing “ENTER” to confirm 15-fig. 1it is
possible to perform the following
fig. 61:
– add the selected entry to the “Fre-
quent numbers” list (if the list is full,
the key is disabled), proceed as fol-
lows: rotate the encoder 14-fig. 1to
select “Save in frequent numbers”
then press “ENTER” to confirm 15-
fig. 1, the selected entry is automati-
cally added in last position of the “Fre-
quent numbers” list.
– copy the selected entry from the di-
rectory to the SIM card and vice versa.
To copy a directory entry to the SIM
card:
– rotate the encoder 14-fig. 1to se-
lect “Save in SIM” and press “ENTER”
to confirm 15-fig. 1; the system
checks if an entry with the same name
is already present in the SIM card (if
it is so, the display shows the string
“Name already in SIM card”), then
copy to SIM card is done. To copy an entry from the SIM card
to the directory:
– rotate the encoder 14-fig. 1to se-
lect “Save in directory” and press “EN-
TER” to confirm 15-fig. 1; the system
checks if an entry with the same name
is already present in the directory (if
it is so, the display shows the string
“Name already in directory”) then
copy to directory is done. Each directory entry is identified by
number, name and location.
If two entries have the same name
and number but different location,
both entries are added to the direc-
tory list.
In the entry list, a dedicated icon in-
dicates entry location:
©= item stored in phone direc-
tory;
®= item stored in SIM card.
“Previous entry” and “Next entry”:
these icons fig. 58 show data concern-
ing previous or next directory entry.
If the user is already at the first or
last position in the directory these but-
tons are disabled.
fig. 61
F0C4055g

CONNECT Nav+
76
“Add” icon key
“Add” icon enables to add a new en-
try to the directory.
Rotate the encoder 14-fig. 1, select
“Add” icon and press “ENTER” to
confirm 15-fig. 1; the display shows
the status in fig. 62, and the follow-
ing icon keys: “Name”, “Number”,
“Location”, “Voice recognizer”, “OK”.“Name”: allows input of name and
surname of new entry, proceed as fol-
lows:
IMPORTANTWhen selecting
“Name”, remember that it is not pos-
sible to add a name already present in
the Navigator (NAV) function direc-
tory.
– rotate the encoder 14-fig. 1,
choose “Select” icon and press “EN-
TER” to confirm 15-fig. 1; the display
shows the keypad and the editing box
fig. 63.
– form name and surname by select-
ing letters one by one through the en-
coder 14-fig. 1and then press “EN-
TER” to confirm 15-fig. 1; proceed in
this way until completing the entry;– rotate the encoder 14-fig. 1, se-
lect the “OK” icon and then press
“ENTER” to confirm 15-fig. 1; the dis-
play returns to screen in fig. 62.
“Number”: allows insertion of new
phone number, proceed as follows:
– rotate the encoder 14-fig. 1, se-
lect the “Number” icon and then press
“ENTER” to confirm 15-fig. 1; the dis-
play shows the keypad and the edit-
ing box fig. 63.
– form the number selecting digits
one by one through the encoder 14-
fig. 1and then press “ENTER” to con-
firm 15-fig. 1; proceed in this way un-
til completing the required phone
number;
– rotate the encoder 14-fig. 1, and
then press “ENTER” to confirm 15-
fig. 1; the display returns to the
screen in fig. 62.
fig. 62
F0C4056g
fig. 63
F0C4194g