MAINTAININ G YOUR VEHICLE 245
7
Recommended Fluids and LubricantsComponent Recommended Fluid
Brake Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with:
minimum
dry boiling point (ERBP) 500°F, minimum wet boiling point
(WERBP) 356°F, maximum viscosity 1500 mm
2/s, conforming to FMVSS 116
and ISO 4925.
Coolant Use coolant approved to MB 325.0, such as Valvoline GO5, or an equivalent
Extended Life Coolant.
Engine Use engine oils approved to MB 228.3 or MB 228.5 that are also licensed to
API CI-4.
Automatic Transmission Use ATF approved to MB 236.10, MB 236.12. Synthetic Dexron III®
Automatic Transmission Fluid may be substituted.
Power Steering No fluid service required. Use Power Steering Fluid approved to MB 341.
Dexron III® Automatic Transmission Fluid may be substituted.
Rear Axle Use oils approved to MB 235.0, such as Shell Spirax MB 90. Reduced axle
durability may result if an unapproved product is used.
Freightliner-all.book Pag e 245 Monday, December 1, 2003 2:54 PM
252 MAINTENANCE SCHEDULES
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S8
SCOPE OF WORK FOR MA INTENA NCE SERVICE
Oil ServiceOil change
Engine:
Oil change and filter replacement
Check fluid levels of the following system, refill as
necessary.
If fluid is lost, trace and eliminate cause – as a separate
order.
Power-assisted steering
Lubrication work:
Trailer tow hitch (original equipment)
Maintenance
ASSYST maintenance computer resetFunction check
Signalling system,
warning and indicator lamps
Headlamps, exterior lighting
Windscreen wipers,
windscreen washer system
Check for leaks and damage.
Check for abrasion points and ensure that
lines are correctly routed!
All assemblies:
Engine, transmission, transfer case, front axle, rear
axle, steering, power steering pump
All lines and hoses, sensor cables
Rubber boots on front axle drive shafts,
rubber boots on front axle suspension ball joints, shock
absorbersFreightliner-all.book Pag e 252 Monday, December 1, 2003 2:54 PM
