Page 1015 of 2643
USAGE AND CAPACITY OF FUSES IN FUSE BLOCKW4–3
2. I.P FUSE BLOCK
1) POSITION OF FUSE AND RELAY
2) USAGE OF FUSE IN I.P FUSE BLOCK
Power
Supply
ClassificationFuse
NoCapacityUsage
IGN1 (15)Blade TypeF110ASDM
FuseF210ATCM, ECM, Generator, VGIS,VSS
F315AHazard Switch
F410ACluster, Chime Bell, Brake Switch, SSPS Module,
A/C Control Switch
–F5––
IGN2 (15A)F610AA/C Comp. Relay, Defog Relay, Power Window
Relay, Head Lamp Relay
F720ABlower Relay, A/C Control Switch, FATC
F815AElectric Mirror Switch, Folding Mirror, Sun Roof
Module
IGN1 (15)F925AWiper Motor, Wiper Switch
–F10––
IGN1 (15)F1110AEBCM, Oil Feeding Connector
F1210AImmobilizer, Anti Theft Control Unit, Rain Sensor
Unit
30 BAT(+)F1310ATCM
F1415AHazard Switch
F1515AAnti Theft Control Unit
F1610ADLC
ACC (15C)F1710AAudio, Clock
F1815AExtra Power Jack
F1915ACigar Lighter
IGN1 (15)F2010AReverse Lamp Switch, PNP Switch
30 BAT(+)F2115ARear Fog Relay
F2215AClock, FATC, A/C Control Switch
F2315AAudio
F2410AImmobilizer
Page 2220 of 2643
9A – 14IBODY WIRING SYSTEM
DAEWOO V–121 BL4
I/P Fuse Block
FuseRating/SourceCircuit
F110AIGN 1SDM
F210AIGN 1TCM, ECM, Generator, VGIS, VSS
F315AIGN 1Hazard Switch
F410AIGN 1Cluster, DRL Module, Chime Bell, Brake Switch,
SSPS Module, A/C Control Switch
F5–Spare–
F610AIGN 2A/C Comp. Relay, Defog Relay, Power Window
Relay, Head Lamp Relay
F720AIGN 2Blower Relay, A/C Control Switch, FATC
F815AIGN 2Electric Mirror Switch, Folding Mirror, Sun Roof
Module
F925AIGN 1Wiper Motor, Wiper Switch
F10–Spare–
F1110AIGN 1EBCM, Oil Feeding Connector
F1210AIGN 1Immobilizer, Anti Theft Control Unit, Rain Sensor
Unit
F1310AB+TCM
F1415AB+Hazard Switch
F1515AB+Anti Theft Control Unit
F1610AB+DLC
F1710AACCAudio, Clock
F1815AACCExtra Power Jack
F1915AACCCigar Lighter
F2010AIGN 1Reverse Lamp Switch, PNP Switch
F2115AB+Rear Fog Relay
F2215AB+Clock, FATC, A/C Control Switch
F2315AB+Audio
F2410AB+Immobilizer
Page 2285 of 2643

9D – 8IWIPERS/WASHER SYSTEMS
DAEWOO V–121 BL4
Wipers Do Not Work On Intermittent (INT), Other Speeds OK
StepActionValue(s)YesNo
11. Turn the ignition ON.
2. Turn the wiper switch to INT.
3. Check the voltage at wiper motor connector
terminal 2.
Does the voltmeter indicate a voltage equal to the
specified value?11–14 vGo to Step 5Go to Step 2
2Check for an open circuit between wiper switch con-
nector terminal B2 and wiper motor connector termi-
nal 2.
Is there an open circuit?–Go to Step 4Go to Step 3
3Replace the wiper switch.
Is the repair complete?–System OK–
4Repair the open circuit between wiper switch con-
nector terminal B2 and wiper motor connector termi-
nal 2.
Is the repair complete?–System OK–
51. Turn the ignition ON.
2. Turn the wiper switch to INT.
3. Check for pulsing voltage at wiper motor con-
nector terminal 6.
Does the voltmeter indicate a pulsating voltage
equal to the specified value?11–14 vGo to Step 7Go to Step 6
6Replace the wiper motor.
Is the repair complete?–System OK–
71. Ignition ON.
2. Check the voltage at the wiper switch connec-
tor terminal A6.
Is voltage pulsating at the specified value?11–14 vGo to Step 8Go to Step 9
8Replace the wiper switch.
Is the repair complete?–System OK–
9Repair the open circuit between the wiper switch and
the wiper motor.
Is the relay complete?–System OK–