2004 DACIA SUPERNOVA rims

VALUES AND SETTINGS
07WHEELS AND TYRES
VEHICLE
DACIA
SUPERNOVA RIMS
5,5B x13
5,5 Jx13H2 TIRES
165 / 70 R 13
PRESSURE (daN/cm
2)
FRON TR EAR
1,9 2,0
Tightening moments of the wheels nuts 7.5 daNm.
Axial run out : max 1 mm
Radial run out : max 1 mm
07 - 6
vnx.su

35
WHEELS AND TYRES
CARACTERISTICSRIMS
The wheels identification marking is represented in two ways:
- engraved marking for steel rims
- cast marking for aluminum rims
The marking enables acknowledgment of the main wheels dimensions criteria. This marking
may be:
complete,
Example: 5
1/2 B 13 4 CH 46 ; 5 1/2 J 13 4 H2 46
or simplified,
Example: 5
1/2 B 13 ; 5 1/2 J 13 H2
The wheel bolts (studs) are situated on a diameter of 100 mm.
Maximum axial runout : 1 mm measured on the rim edge ( in G ).
Maximum radial runout : 1 mm measured on the supporting side of the tires beads.
AB C D EF
Whe els Width The rim Æ Nominal Number of Tire Offset
type (in inches) edge profile rim (in inches) wholes under staffing profile (in mm) the tire bead
5
1/2B13 5 1/2B1 34C H46
4 CH48
5
1/2J13 5 1/2J1 34H 246
4H 2
35 - 1
vnx.su

35
WHEELS AND TYRES
CARACTERISTICSRIMS – TIRES
The wheels screws tightening moment : 7,5 daNm.
The inflating pressure must be checked at cold.
The temperature raising during driving, leads to a pressure increase from 0.2.
to 0.3 bars. In case temperature checking is done at warm, take i nto account this pressure increase and
never deflate it. A
ir filling pressure
(barr) at cold
Vehi cle Rim T i res Front Rear
R52315 5,5 B13 165/70R13 1,9 2,0
5,5 J13 165/70R13
35 - 3
vnx.su

WHEELS AND TYRES
35WHEELS BALANCING
BALANCING WEIGHTS
Use exclusively the weights delivered as spare parts:
- fixed by means of clamps on steel rims ( clamps included in weights)
- fixed by means of clamps (plate clamps ) for aluminum rims
A = steel balancing weights for steel rims
B = steel balancing weights for aluminum alloy rims.
35 - 4
A
B
vnx.su