VALUES AND SETTINGS
07DIMENSIONS , WEIGHTS
07 - 1
DIMENSIONS (mm)
Total length (B) 4030
Total width (G) 1640
Total height (H) * em pty 1395
* with lifted hatchback (H1) 1940
Wheel base (A) 2475
Front wheel track width (E) 1410
Rear wheel track width (F) 1345
Ground clearance (K) * loaded 134
Hatchback free height (Q) 925
Turning radius * Between footways 4950
* Between walls 5000WEIGHTS (kg)
Unloaded vehicle weight: * on the front axle 545
* on th e rear axle 405
* total 950
Maxi mum authorized load
* on the front axle 715
* on th e rear axle 670
* total 1385
Authorized payload 425
Load w ith trailer with own brake 815
Load w ith trailer without own brake 450
vnx.su
33
REAR BEARING ELEMENTS
REAR AXLE
Check and adjust the hand brake cable.
Ad just the cleara nce at t he l imi ter ope rating rod (se e chapt er 37- Bra ke l imite r
adjustment). REMOUNTING
Before remounting, grease with grease the attachment screws of the rear axle shock
absorber bottom and the chassis, consequently, the connecting screws rear a xle-c hassis. Line up the arm s beari ngs right to t he c hassis supports, mounting them without t ighten-
ing at the moment, the nuts with the screws, assembling the axle to the chassis.
Remount the springs.
Compress the axle so that rear springs bear on the tray and set back the shock absorber
inner attachment screws. Tighten at the prescribed moment the connecting screws.
Perform the dismounting operations in the reverse order.
Check the maximum allowed axial cleara nce of the bearing using a dial gauge and the
s upport RO541A.
Note
The maximum allowed axle clearance of the bearing is 0.05mm.
Mount the rear wheels, lower t he vehicle on the ground.
Refill with fluid the brake assembly.
Pu rge the braking system.
33 - 3
vnx.su
