Page 27 of 891

ENGINE E7J-26210
ENGINE ASSEMBLY
10 - 2
OIL CONSUMPTION MEASURING
a) Oil filling to maximal level
This operation is to be performed when the engine is warm (one engine fan rotation) and after
a stabilization of 15 minutes, necessary to the oil complete draining into the lower crankshaft.
Check the oil at the oil-indicating rod.
Fill to the maximal level.
Seal the draining and filling taps (mark them with paint), for further checking if these have not
been dismounted
b) Customer driving time
Ask the customer to drive for about 2000 km or until the oil reaches the minimal level.
c) Refilling to the maximal l evel
This operation is to be performed when the engine is warm (one engine fan rotation) and after
a stabilization of 15 minutes.
Check the oil at the oil-indicating rod.
Fill to the maximal level.
Write down the oil quantity and the driven mileage after filling to the maximal level.
d) Oil consumption measuring
Oil filled quantity (liter)
OIL CONSUMPTION =
kilometers (thousand)
Oil con sumption
vnx.su
Page 225 of 891
CV JH3 - 05121
MECHANICAL GEARBOX
21 - 5
Ratio s
GEAR STEPI II III IV V R.D.
NR. OF TEETH 41/11 43/21 39/28 35/34 31/39 39/11
RATIO 3.727 2.048 1.393 1.029 0.795 3.545
GB INDEX VEHICLE MAIN MILEAGE TRANSMISSION GEARING
JH3-051 SOLENZA 15/56 21/19
A
CAPACITY , LUBRICANTS
O il used : Dacia Extragear 75 W – 80 W; API GL5
The oil quantity needed for the gearbox operation is 3.5 liters.
The oiling of the gearbox parts is done by splash lubrication
Checking of the oil level is done through the filling plug A.
A
vnx.su
Page 611 of 891
83
INSTRUMENT PANEL
83 - 5
The instrument panel (speedometer, mileage) and t he speed limit a lert * are receiving t he
information regarding vehicle speed from an electronic transducer.
This information is also used by the UCE injection.
Connector Pin Denomination
AS upply after contact (+DC)
B1 Vehicle speed signal
B2 Mass
* For vehicles with speed limit alert.
Speed transducer
vnx.su