2004 CHEVROLET TRACKER Owners Manual

Manual Lumbar
If your vehicle has this feature, turn the knob located on
the driver's side seatback to adjust support of the
lower back.
Reclining Seatbacks
To adjust the seatback, lift the lever on the outboard
side of the seat cushion. Release the lever to lock the
seatback where you want it. Pull up on the lever,
and the seatback will go to the upright position.
1-3

But don't have a seatback reclined if your vehicle is
moving.
{CAUTION:
Sitting in a reclined position when your vehicle
is in motion can be dangerous. Even if you
buckle up, your safety belts can't do their job
when you're reclined like this.
The shoulder belt can't do its job because it
won't be against your body. Instead, it will be
in front of you. In a crash you could go into it,
receiving neck or other injuries.
The lap belt can't do its job either. In a crash
the belt could go up over your abdomen. The
belt forces would be there, not at your pelvic
bones. This could cause serious internal
injuries.
For proper protection when the vehicle is in
motion, have the seatback upright. Then sit
well back in the seat and wear your safety belt
properly.
1-4

Head Restraints
Adjust your head restraint so that the top of the restraint
is closest to the top of your head. This position
reduces the chance of a neck injury in a crash.
The head restraint can be adjusted to four positions.
To raise the restraint, pull up on the restraint. To lower
the restraint, push in the release button while you
push down on the restraint.
Rear Seats
Rear Seat Operation
{CAUTION:
If a head restraint is not installed on the
seatback or stored in the vehicle properly, it
could be thrown about the vehicle in a crash
or sudden maneuver. People in the vehicle
could be injured. Remove the head restraints
only when you need to fold the seat, and be
sure that the head restraints are stored
securely in their proper storage location. When
the seat is returned to the passenger position,
be sure the head restraints are installed
properly.
1-5

Folding the Seatback
The rear seat in your vehicle folds to provide more
cargo space. To fold the rear seats do the following:
1. Fold the safety belt buckles and center safety belt
(if equipped) into the pocket of the rear seatback.2. Pull the release straps located near the center of
the vehicle to release the seat cushion. Fold the
seat cushion forward.
1-6

3. Remove the head restraint from the seatback by
raising the head restraint fully. Press the release
button and remove the head restraint from the
seatback.4. Store the head restraint
in the top of the folded
seat cushion.
5. Pull up on the
seatback release
knob(s) on top of the
seatback and fold
the seatback down.
1-7

6. Secure the two black
straps attached to the
back of the folded
seat cushion by
hooking them onto the
knobs on the back
of the seatback when
folded down.To raise the rear seat do the following:
1. Unhook the two black straps from the buttons on
the seatback.
2. Fold the rear seatback up. Push and pull on the
seatback to ensure it's locked in position.
3. Reinstall the head restraints by inserting them into
the seatback. Make sure the head restraints are
secure in the seatback.
4. Insert the plates of the two black straps into their
storage slots on the bottom of the seat cushion.
5. Fold the seat cushion back and make sure it is
locked into position.
6. Remove the safety belt buckles and center safety
belt (if equipped) from the seatback pocket.
1-8

Safety Belts
Safety Belts: They Are for Everyone
This part of the manual tells you how to use safety
belts properly. It also tells you some things you should
not do with safety belts.
{CAUTION:
Don't let anyone ride where he or she can't
wear a safety belt properly. If you are in a
crash and you're not wearing a safety belt,
your injuries can be much worse. You can hit
things inside the vehicle or be ejected from it.
You can be seriously injured or killed. In the
same crash, you might not be, if you are
buckled up. Always fasten your safety belt,
and check that your passengers' belts are
fastened properly too.
{CAUTION:
It is extremely dangerous to ride in a cargo
area, inside or outside of a vehicle. In a
collision, people riding in these areas are more
likely to be seriously injured or killed. Do not
allow people to ride in any area of your vehicle
that is not equipped with seats and safety
belts. Be sure everyone in your vehicle is in a
seat and using a safety belt properly.
Your vehicle has a light
that comes on as a
reminder to buckle up. See
Safety Belt Reminder
Light on page 3-28.
In most states and in all Canadian provinces, the law
says to wear safety belts. Here's why:
They work.
1-9

You never know if you'll be in a crash. If you do have a
crash, you don't know if it will be a bad one.
A few crashes are mild, and some crashes can be so
serious that even buckled up, a person wouldn't survive.
But most crashes are in between. In many of them,
people who buckle up can survive and sometimes walk
away. Without belts they could have been badly hurt
or killed.
After more than 30 years of safety belts in vehicles, the
facts are clear. In most crashes buckling up does
matter... a lot!Why Safety Belts Work
When you ride in or on anything, you go as fast as
it goes.
Take the simplest vehicle. Suppose it's just a seat on
wheels.
1-10