
If You Do Decide To Pull A Trailer 
If you do, here are  some important points: 
e 
e 
e 
e 
There  are many  different laws, including  speed limit 
restrictions, having  to do with trailering.  Make sure 
your  rig will  be legal, not only  where  you live 
but  also  where  you’ll be driving.  A  good  source for 
this  information  can  be state or provincial police. 
Consider  using a  sway  control.  You  can  ask  a  hitch 
dealer about  sway controls. 
Don’t  tow  a  trailer  at all during the first 
1,000 miles 
(1 600 km)  your  new vehicle  is driven.  Your 
engine, axle or other parts could  be  damaged. 
Then,  during the first 
500 miles (800  km) that  you 
tow 
a trailer, don’t drive over 50 mph (80 km/h) 
and  don’t  make  starts at full throttle. This  helps your 
engine  and other parts  of your vehicle  wear in at 
the  heavier loads. 
Obey  speed  limit restrictions  when towing  a trailer. 
Don’t drive faster than the  maximum posted speed 
for trailers,  or  no  more  than 55  mph 
(90 km/h), 
to  save  wear  on  your vehicle’s parts.  Three 
important considerations  have to do  with  weight: 
e the weight  of the  trailer, 
the weight  of the  trailer  tongue 
and  the total  weight  on  your  vehicle’s tires. 
Weight of the Trailer 
How  heavy  can  a  trailer safely  be? 
It should never  weigh  more  than 
1000 Ibs (454  kg). 
But  even  that  can  be  too  heavy. 
It  depends  on  how  you  plan to use  your  rig.  For 
example,  speed,  altitude, road grades,  outside 
temperature  and  how  much  your  vehicle  is used  to pull 
a  trailer are all  important.  And, it can  also  depend 
on  any  special  equipment  that you  have  on  your  vehicle. 
You can ask  your  dealer  for  our  trailering information 
or advice,  or  you can write  us at: 
Pontiac-GMC  Customer  Assistance  Center 
P.O.  Box  33172 
Detroit, MI  48232-51  72 
In  Canada,  write  to: 
General  Motors of Canada  Limited 
Customer  Communication  Centre, 
163-005 
1908 Colonel Sam  Drive 
Oshawa,  Ontario 
L1 H  8P7 
4-38  

Weight of the  Trailer  Tongue 
The  tongue load (A) of any  trailer  is an  important weight 
to  measure  because  it affects the total or gross weight 
of your  vehicle.  The  Gross  Vehicle Weight (GWV) 
includes  the curb  weight  of  the vehicle,  any cargo  you 
may  carry  in it,  and  the  people who will be riding  in 
the  vehicle.  And 
if you  tow  a  trailer, you  must  add  the 
tongue  load to the  GVW  because  your vehicle will 
be  carrying  that  weight,  too.  See  Loading  Your  Vehicle 
on  page  4-35 for  more  information  about  your 
vehicle’s  maximum  load  capacity. 
A 
If you’re using  a weight-carrying hitch or  a 
weight-distributing hitch,  the trailer  tongue 
(A) should 
weigh 
10-15 percent  of the total loaded trailer 
weight 
(B). 
After you’ve loaded your  trailer,  weigh the trailer and 
then  the  tongue, separately, to  see if the weights 
are proper. 
If they  aren’t,  you  may  be  able to get  them 
right simply  by moving  some  items around  in  the 
trailer. 
Total  Weight  on  Your  Vehicle’s Tires 
Be sure your vehicle’s tires are inflated  to  the upper limit 
for  cold tires. You’ll find these  numbers on the  Tire 
Loading  Information label, found  on the  inside  of 
the  trunk lid, 
or see  Loading  Your  Vehicle  on  page  4-35. 
Then  be  sure you  don’t  go  over  the  GVW limit for 
your vehicle, including  the weight  of the  trailer 
tongue. 
4-39  

Driving  with a Trailer 
Passing 
Towing  a trailer requires  a certain  amount  of experience. 
Before  setting  out  for  the  open  road, you’ll  want  to get 
to  know  your  rig.  Acquaint  yourself with the feel 
of 
handling and braking  with the added  weight  of the trailer. 
And  always  keep in mind  that the vehicle  you are 
driving is  now  a  good  deal longer and not nearly  as 
responsive  as  your  vehicle is  by itself. 
Before  you  start, check  the trailer hitch  and platform 
(and  attachments),  safety chains, electrical connector, 
lamps,  tires and  mirror  adjustment. 
If the trailer has 
electric  brakes,  start  your  vehicle and trailer moving and 
then  apply  the  trailer brake controller  by hand  to  be 
sure  the brakes  are working. This lets  you  check  your 
electrical connection  at the  same  time. 
During  your  trip,  check  occasionally to be  sure that the 
load is  secure,  and  that  the lamps  and any trailer 
brakes  are still  working. 
Following  Distance 
Stay  at  least twice  as far  behind  the vehicle  ahead as 
you  would  when  driving your vehicle without  a trailer. 
This  can help  you avoid situations that  require 
heavy  braking  and  sudden  turns.  You’ll  need  more 
passing distance up ahead  when 
you’re towing 
a trailer.  And,  because  you’re a  good  deal 
longer, you’ll  need to go  much  farther beyond the 
passed  vehicle before  you can  return  to your lane. 
Backing Up 
Hold  the  bottom of the steering  wheel with one hand. 
Then,  to move  the trailer  to the  left,  just  move that hand 
to  the  left.  To  move  the trailer  to the  right,  move your 
hand  to  the  right. Always  back  up  slowly and, 
if possible, 
have  someone  guide you. 
Making Turns 
Notice: Making  very sharp  turns while  trailering 
could  cause  the  trailer 
to come in contact  with the 
vehicle.  Your  vehicle  could be damaged. Avoid 
making  very sharp turns  while trailering. 
When  you’re  turning with a trailer, make wider turns 
than  normal.  Do this 
so your trailer  won’t strike 
soft shoulders, curbs, road signs, trees or other objects. 
Avoid jerky  or  sudden  maneuvers.  Signal well in 
advance. 
4-4 1  

Section 5 Service  and  Appearance  Care 
Service ............................................................ 5.3 
Doing  Your 
Owr? Service  Work ......................... 5-4 
Adding  Equipment  to  the  Outside of 
Your  Vehicle 
.............................................. 5-4 
Fuel ................................................................ 5-5 
Gasoline  Octane 
............................................ 5-5 
Gasoline  Specifications 
.................................... 5-5 
California  Fuel 
............................................... 5-6 
Additives 
....................................................... 5-6 
Fuels  in Foreign  Countries 
............................... 5-7 
Filling  Your  Tank 
............................................ 5-7 
Filling  a Portable  Fuel  Container 
....................... 5-9 
Checking  Things  Under  the  Hood .................... 5-10 
Hood  Release 
.............................................. 5-10 
Engine  Compartment  Overview 
....................... 5-12 
Engine  Oil 
................................................... 5-18 
Supercharger  Oil 
.......................................... 5-24 
Engine  Air  CleanedFilter 
................................ 5-25 
Automatic  Transaxle  Fluid 
.............................. 5-27 
Engine  Coolant 
............................................. 5-30 
Radiator  Pressure  Cap 
.................................. 5-33 
Cooling  System 
........................................... -5-36 
Power  Steering  Fluid 
..................................... 5-46 
Windshield  Washer  Fluid 
................................ 5-48 
Engine  Overheating 
....................................... 5-33  Brakes 
........................................................ 5.49 
Battery 
........................................................ 5.52 
Jump  Starting 
............................................... 5-53 
Bulb  Replacement .......................................... 5-60 
Halogen  Bulbs 
.............................................. 5-60 
Headlamps 
.................................................. 5-60 
Front Turn  Signal and Sidemarker  Lamps 
........ 5-62 
Center  High-Mounted  Stoplamp (CHMSL) 
......... 5-63 
Taillamps,  Sidemarker  and  Back-up Lamps 
...... 5-64 
Replacement Bulbs 
....................................... 5-66 
Windshield  Wiper  Blade  Replacement .............. 5-67 
Tires ............................................................. -5-68 
Inflation 
-- Tire  Pressure ................................ 5-68 
Tire  Inspection and  Rotation 
........................... 5-69 
When  It 
Is Time for  New  Tires ....................... 5-70 
Buying  New Tires 
......................................... 5-71 
Uniform Tire  Quality  Grading 
.......................... 5-72 
Wheel  Replacement 
...................................... 5-73 
Headlamp Aiming ........................................... 5-59 
Wheel  Alignment  and  Tire  Balance 
.................. 5-73 
Tire  Chains 
.................................................. 5-75 
If a  Tire  Goes  Flat ........................................ 5-76 
Changing a  Flat Tire 
..................................... 5-76 
Compact Spare Tire 
...................................... 5-87 
5-  1  

Tires 
Your new vehicle comes with high-quality tires made  by 
a  leading tire manufacturer. 
If you  ever  have questions 
about your tire  warranty and where  to obtain service, 
see your  Pontiac Warranty booklet for  details. 
. -orly mai __ and  impropel  used  tires 
are  dangerous. 
Overloading  your  tires  can  cause 
overheating  as  a  result  of  too  much 
friction.  You  could  have  an  air-out  and  a  serious  accident.  See “Loading  Your 
Vehicle”  in  the  Index. 
Underinflated  tires  pose  the  same  danger 
as  overloaded  tires.  The resulting  accident 
could  cause  serious  injury.  Check  all  tires 
frequently  to  maintain  the  recommended  pressure.  Tire  pressure  should  be  checked 
when  your  tires  are  cold. 
CAUTION: (Continued) 
Overinflated  tires  are  more  likely  to  be 
cut,  punctured  or  broken  by  a  sudden 
impact 
- such  as  when  you hit a  pothole. 
Keep  tires  at  the  recommended  pressure. 
Worn,  old  tires  can  cause  accidents.  If 
your  tread 
is badly  worn,  or  if  your  tires 
have  been  damaged, replace them. 
Inflation -- Tire Pressure 
The Tire-Loading  Information label, which  is on  the 
inside  of the  trunk  lid,  shows  the correct  inflation 
pressures  for  your tires when  they’re  cold.  “Cold”  means 
your  vehicle has been sitting  for at least  three  hours 
or  driven no more  than 
1 mile (1.6 km). 
Notice: Don’t  let  anyone  tell  you  that  underinflation 
or  overinflation 
is all  right.  It’s  not. If your  tires 
don’t  have  enough  air  (underinflation),  you  can  get 
the  following: 
Too  much  flexing 
Too  much  heat 
Tire  overloading 
5-68  

Bad  wear 
0 Bad  handling 
Bad fuel  economy 
If your  tires  have  too  much air (overinflation), 
you  can  get  the  following: 
Unusual  wear 
Bad  handling 
Rough  ride 
Needless  damage  from  road hazards 
When to Check 
Check  your tires once  a  month  or  more. 
Don’t  forget  your  compact  spare tire.  It should  be 
at 
60 psi (420 kPa). 
How to Check 
Use  a  good  quality  pocket-type gage to check  tire 
pressure.  You  can’t  tell 
if your tires are properly inflated 
simply  by looking  at them. Radial tires  may look 
properly inflated  even  when  they’re  underinflated. 
Be  sure  to put  the  valve  caps  back  on  the valve stems. 
They  help prevent  leaks  by keeping out dirt and 
moisture. 
Tire  Inspection  and  Rotation 
Tires should  be rotated every 7,500 miles (1 2 500 km). 
Any  time  you notice unusual  wear, rotate your tires 
as  soon  as possible and  check  wheel alignment. 
Also 
check for damaged  tires or  wheels.  See  When It Is Time 
for  New  Tires on page 
5-70 and  Wheel  Replacement 
on page 5-73 for more  information. 
The  purpose  of regular rotation  is to achieve more 
uniform  wear for all tires  on the  vehicle. The first  rotation 
is  the  most  important.  See  “Part  A:  Scheduled 
Maintenance  Services,’’  in Section 
6, for  scheduled 
rotation intervals. 
1 
When  rotating your tires,  always  use the correct  rotation 
pattern  shown here. 
5-69  

Don’t include the  compact spare tire  in your tire rotation. 
After  the tires  have  been  rotated, adjust the front  and 
rear inflation pressures as  shown  on the Tire-Loading 
Information  label.  Make  certain that all  wheel nuts 
are  properly tightened.  See  “Wheel Nut Torque”  under 
Capacities and Snncifjcations 
on page 5- 102. 
Rust or  dirt  on  a  wheel, or on ,,le parts to 
which it is  fastened,  can  make  wheel  nuts 
become  loose  after  a  time.  The wheel  could 
come 
off and  cause  an accident.  When you 
change  a  wheel, remove  any  rust  or  dirt  from 
places  where  the  wheel  attaches  to  the  vehicle. 
In an  emergency,  you  can  use  a  cloth  or a 
paper  towel  to  do  this;  but  be  sure  to  use  a 
scraper  or  wire  brush  later,  if  you  need  to,  to 
get  all  the  rust  or 
dirt off. See  “Changing  a  Flat 
Tire” 
in the  Index. 
When It Is Time  for New Tires 
One  way  to tell  when  it’s 
time  for  new  tires is to 
check  the treadwear 
indicators,  which  will 
appear  when  your 
tires  have  only 
1/16 inch (1.6 mm) 
or less  of tread 
remaining. 
You  need  a  new  tire 
if any of the following  statements 
are true: 
You  can  see  the indicators  at  three or more  places 
around  the tire. 
You  can see cord  or fabric  showing  through  the 
0 The  tread  or sidewall is  cracked, cut or  snagged 
tire’s  rubber. 
deep  enough  to show  cord or  fabric. 
5-70  

The tire has  a  bump,  bulge or split. 
The tire has  a  puncture,  cut or other  damage  that 
can’t  be  repaired well  because of the  size or 
location  of the  damage. 
Buying New Tires 
To  find  out  what  kind and size  of tires  you  need,  look at 
the  Tire-Loading Information label. 
The  tires installed  on  your vehicle when it was  new  had 
a  Tire  Performance  Criteria Specification  (TPC  Spec) 
number  on  each  tire’s  sidewall. When  you  get  new  tires, 
get  ones  with  that same  TPC Spec  number.  That  way 
your  vehicle  will continue  to have  tires that are  designed 
to  give  proper  endurance,  handling, speed rating, 
traction,  ride  and  other  things during normal service 
on 
your  vehicle. If your tires have  an  all-season tread 
design,  the  TPC  number  will be followed  by an 
“MS” 
(for  mud  and  snow). 
If  you  ever  replace  your  tires with those not having 
a 
TPC  Spec  number,  make  sure they are the same 
size,  load range,  speed  rating and construction type 
(bias,  bias-belted  or  radial) as your  original tires. 
MiXing tires COUld C8USt2 YOU aQ COnarO! 
while  driving.  If  you  mix  tires  of  different  sizes 
or types  (radial  and  bias-belted  tires),  the 
vehicle  may  not  handle  properly,  and  you  could  have  a  crash.  Using  tires  of  different 
sizes  may 
also cause  damage to your  vehicle. 
Be  sure  to  use  the  same  size  and  type  tires  on 
all  wheels. 
It’s all  right  to  drive  with  your 
compact  spare  temporarily, 
it was  developed 
for  use  on  your  vehicle.  See “Compact  Spare 
Tire” 
in the  index. 
.. ~OL ,se  bias-ply  tires  on  your  vehicle,  ..le 
wheel  rim  flanges  could  develop  cracks  after  many  miles  of  driving. 
A tire  and/or  wheel 
could  fail  suddenly,  causing  a  crash.  Use  only  radial-ply  tires  with  the  wheels  on  your  vehicle. 
I 
5-71