2003 MAZDA MODEL B-SERIES Owners Manual (in English)

Page 129 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) SPECIAL LOADING INSTRUCTIONS FOR OWNERS OF PICKUP
TRUCKS AND UTILITY-TYPE VEHICLES
WARNING: For important information regarding safe operation
of this type of vehicle, see the Preparing to drive your

Page 130 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) determined by subtracting the vehicle curb weight for each
engine/transmission combination, any required option weight for trailer
towing and the weight of the driver from the GCWR for the towing
vehi

Page 131 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) Calculating the load your vehicle can carry/tow
1. Use the appropriate maximum GCWR chart (in theTrailer Towing
section in this chapter) for your type of engine and rear axle ratio.
2. Weigh your vehi

Page 132 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) 4x2 w/manual transmission
For high altitude operation, reduce GCW by 2% per 300 meters (1, 000
ft.) elevation.
For definition of terms used in this table seeVehicle Loadingearlier
in this chapter.
To

Page 133 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) 4x2 w/automatic transmission
Engine Rear axle
ratioMaximum
GCWR - kg
(lbs.)Maximum
trailer
weight - kg
(lbs.)Maximum
frontal area
of trailer -
m
2(ft2)
Regular Cab
2.3L All 2,495 (5,500) 1,025 (2,260)

Page 134 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) 4x4 w/automatic transmission
Engine Rear axle
ratioMaximum
GCWR - kg
(lbs.)Maximum
trailer
weight - kg
(lbs.)Maximum
frontal area
of trailer -
m
2(ft2)
Regular Cab
3.0L All 3,402 (7,500) 1,742 (3,840)

Page 135 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) Hitches
For towing trailers up to 907 kg (2,000 lb), use a weight carrying hitch
and ball which uniformly distributes the trailer tongue loads through the
underbody structure. Use a frame-mounted weig

Page 136 of 245

MAZDA MODEL B-SERIES 2003  Owners Manual (in English) Using a step bumper
The optional step bumper is equipped with an integral hitch and requires
only a ball with a 19 mm (3/4 inch) shank diameter. The bumper has a
907 kg (2,000 lb.) trailer weight and