2003 Hyundai H-1 (Grand Starex) reset

2-3
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C030A03P-GAT INSTRUMENTS
INSTRUMENTS INSTRUMENTS
INSTRUMENTS
INSTRUMENTS
1. Water temperature gauge
2. Tachometer (If installed)
3. Speedometer 4. Odometer
5. Fuel gauge
6. Trip meter reset button
7. Trip meter
C130A01P-3
12 3
45
6
7

2-5
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C040A01P-GAT
SPEEDOMETER
SPEEDOMETER SPEEDOMETER
SPEEDOMETER
SPEEDOMETER
The speedometer indicates the vehicle's speed
in kilometers per hour (km/h) or miles per hour (mph).
1. Odometer
2. Tripmeter
3. Tripmeter reset button C050A01P-GATODOMETER
ODOMETER ODOMETER
ODOMETER
ODOMETER
The odometer indicates the total distance the
vehicle has travelled.
C060A01P-GATTRIPMETER AND RESET BUTTON
TRIPMETER AND RESET BUTTON TRIPMETER AND RESET BUTTON
TRIPMETER AND RESET BUTTON
TRIPMETER AND RESET BUTTON
The tripmeter indicates the distance travelled
during a particular trip or period. Press the reset button to return the tripmeter
indication to zero. C070A01P-GAT
TACHOMETER (If installed)
TACHOMETER (If installed) TACHOMETER (If installed)
TACHOMETER (If installed)
TACHOMETER (If installed)
C070A01P-1
The tachometer indicates the engine
speed(rpm). The tachometer can help you ob- tain more economical driving and also warnsyou of excessive engine speeds. During travel,watch the tachometer to be sure that the en-gine speed indication does not rise to the redzone (range of the excessive engine rpm).C080A01P-1
C080A01P-GAT
FUEL GAUGE
FUEL GAUGE FUEL GAUGE
FUEL GAUGE
FUEL GAUGE
The fuel gauge indicates the fuel level in the
fuel tank regardless of the ignition switch posi- tion.
F : Full
E : EmptyC040A01P-1
1
3
2

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-24
C610A02P-GAG
Lever type23 4
1
There are four controls for the heating and cooling system. They are:
1. Fan Speed Control. This is used to turn the fan on and select thefan speed.
C610A01P-GAT
HEATING AND COOLING
HEATING AND COOLING HEATING AND COOLING
HEATING AND COOLING
HEATING AND COOLING
Rotary and push button type
C610A01P-GAG43
21
C430A01P-GAT
Type B (If installed)
Type B (If installed) Type B (If installed)
Type B (If installed)
Type B (If installed) C440A01P-GAT
DIGITAL CLOCK (If installed)
DIGITAL CLOCK (If installed) DIGITAL CLOCK (If installed)
DIGITAL CLOCK (If installed)
DIGITAL CLOCK (If installed)
C440A01P-GAGC430A01P-GAG
To use the ashtray, open up the lid. To remove the ashtray, open the lid and lift
upward holding the lid. The digital clock indicates the time while the
ignition switch is at either the "ON" or "ACC" position.
Set the time by pressing the various buttons as
described below.
HH
HH
H --
--
- To adjust the hours
MM
MM
M --
--
- To adjust the minutes
RR
RR
R --
--
- To reset the minutes to zero.
Example: 10 : 01 - 10 : 29 ................... change to 10 : 00 10 : 30 - 10 : 59 ................... change to 11 : 00

2-33
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
5. TUNE/SEEK Button
K210A01P-GAT
STEREO RADIO OPERATION (K220) (If installed)
STEREO RADIO OPERATION (K220) (If installed) STEREO RADIO OPERATION (K220) (If installed)
STEREO RADIO OPERATION (K220) (If installed)
STEREO RADIO OPERATION (K220) (If installed)
K220A01TB-1
1. Power ON/OFF, VOLUME, BALANCE, SCAN Button
7. FADER Button 2. BASS/TREBLE-pull Button
3. Preset Buttons
4. LCD
6. FM/AM Button

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-34 K210B01TB-GAT
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME 1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
Rotate the Power switch clockwise to turn on
the audio when the ignition switch is at ACC or ON position. Once the system is on, you canincrease or decrease the volume by rotating theknob clockwise or counter-clockwise.
oo
oo
o BALANCE
BALANCE BALANCE
BALANCE
BALANCE
Further pull the volume button and rotate clock-
wise to emphasize right sound speaker.
Or rotate counter-clockwise to emphasize left
sound speaker.
oo
oo
o SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
When this button is pressed, the frequency will
be increased to be tuned to the next receivablestation one after another, receiving each stationfor 5 seconds. if the desirable station is tuned,press this button (scan) again to cancel scanfunction.
2. BASS/TREBLE-pull
2. BASS/TREBLE-pull 2. BASS/TREBLE-pull
2. BASS/TREBLE-pull
2. BASS/TREBLE-pull
Press this button to pop up. Rotate the knob
clockwise to increase the Bass and rotate tocounter-clockwise to decrease the Bass.
Further pull the button and rotate clockwise to
increase the Treble.
Or rotate counter-clockwise to decrease the
Treble. After adjustment press the button. 3. PRESET ( 1 ~ 6 )
3. PRESET ( 1 ~ 6 ) 3. PRESET ( 1 ~ 6 )
3. PRESET ( 1 ~ 6 )
3. PRESET ( 1 ~ 6 )
Press any of these buttons not more than 2seconds to listen to the station in memory.Press the preset button for 2 seconds or more,then the current station will be stored into thememory of the preset button.
4. LCD
4. LCD 4. LCD
4. LCD
4. LCD
LCD shows the following information; band ofFM1/FM2/AM/(L)/(M) frequency, preset chan-nel number, ST in case of FM Stereo.
5. TUNE
5. TUNE 5. TUNE
5. TUNE
5. TUNE
Press the button not more than 1 secondthen frequency is increased. Likewise pressthe button not more than 1 second to de-crease the frequency.
oo
oo
o SEEK
SEEK SEEK
SEEK
SEEK
Press the button for over 1 second, then itwill tune to the next receivable higher frequencystation. Likewise, press the button for over1 second then it will tune to the next receivablelower frequency station.If the selected station isin the preset memory, memorized channel willbe on the display too. 6. FM/AM Button
6. FM/AM Button 6. FM/AM Button
6. FM/AM Button
6. FM/AM Button
FM/AM band button, which is used to changethe band repeatedly in following manner. FM1
FM2
AM
FM1
(FM1
FM2
M
L
FM1 : Europe)
7. Fader (If installed)
7. Fader (If installed) 7. Fader (If installed)
7. Fader (If installed)
7. Fader (If installed)
This button is located top side of the volume switch. Rotate clockwise to attenuate frontspeaker sound. Rotate counter-clockwise toattenuate rear speaker sound.

2-37
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
K240A01TB
K240A01TB-GAT
STEREO RADIO OPERATION (H240, K240) (If installed)
STEREO RADIO OPERATION (H240, K240) (If installed) STEREO RADIO OPERATION (H240, K240) (If installed)
STEREO RADIO OPERATION (H240, K240) (If installed)
STEREO RADIO OPERATION (H240, K240) (If installed)
8. LCD
1. Power ON/OFF, VOLUME2. TUNE/SEEK Button
3. PRESET Buttons4. SCAN Button5. BASS/BAL pull Button 6. TREB/pull FAD Button
7. FM/AM Button

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-38 K240B01TB-GAT
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME 1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
Press this button to turn on/off the audio when
the ignition switch is at ACC or ON position. Once the system is on, you can increase ordecrease the volume by rotating the knob clock-wise or counter-clockwise. Press this buttonagain to
turn it off.
2. TUNE
2. TUNE 2. TUNE
2. TUNE
2. TUNE
Press the button not more than 0.5 second
then frequency is increased. Likewise press the button not more than 0.5
second to decrease the frequency.
With the button held down for 0.5 sec or more,
the beep sound will be heard and frequency willincrease or decrease rapidly. if you release thebutton after the beep sound, seek function is inoperation.
oo
oo
o SEEK
SEEK SEEK
SEEK
SEEK
Press the button for over 0.5 second and
release the button after beep sound, then it willtune to the next receivable higher frequencystation. Likewise, press the button for over0.5 second and release the button after thebeep sound, then it will tune to the next receiv-able lower frequency station. if the selectedstation is in the preset memory, memorizedchannel will be on the display too. 3. PRESET
3. PRESET 3. PRESET
3. PRESET
3. PRESET
Press any of these buttons not more than 2seconds to listen to the station in memory.Press the preset button for 2 seconds or more,then the current station will be stored into thememory of the preset button with the sound.
4. SCAN Button
4. SCAN Button 4. SCAN Button
4. SCAN Button
4. SCAN Button
When this button is pressed, the frequency willbe increased to be tuned to the next receivablestation one after another, receiving each stationfor 5 seconds. if the desirable station is tuned,press this button (scan) again to cancel scanfunction.
5. BASS/BAL- pull
5. BASS/BAL- pull 5. BASS/BAL- pull
5. BASS/BAL- pull
5. BASS/BAL- pull
Press to pop the knob out, To increase thebass, rotate the knob clockwise, while to de-crease the Bass, rotate the knob counterclock-wise. Further pull the popped-ed knob for thebalance control. Rotate the knob clockwise toemphasize right speaker sound. (Left speakersound will be attenuated) When the controlknob is turned counter-clockwise, left speakersound will be emphasized. (Right speaker willbe attenuated) 6. TREB/pull-FAD
6. TREB/pull-FAD 6. TREB/pull-FAD
6. TREB/pull-FAD
6. TREB/pull-FAD
Press the pop the knob out and turn clockwiseto increase the treble or counterclockwise todecrease the treble. Further pull the popped-upknob for the Fader control. Turn the controlknob counter clockwise to emphasize frontspeaker sound. (Rear speaker sound will be attenuated) When the control knob is turned clockwise, rearspeaker sound will be emphasized. (Frontspeaker sound will be attenuated)
7. FM/AM Button
7. FM/AM Button 7. FM/AM Button
7. FM/AM Button
7. FM/AM Button
FM/AM band button, which is used to changethe band repeatedly in the following manner . FM1
FM2
AM
FM1
(FM1
FM2
M
L
FM1 : Europe)
8. LCD
8. LCD 8. LCD
8. LCD
8. LCD
LCD shows the following information; band of FM1/FM2/AM frequency, preset channel num-ber, ST in case of FM Stereo.

2-41
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H260A01O-AAT
STEREO RADIO OPERATION (H260) (If
STEREO RADIO OPERATION (H260) (If STEREO RADIO OPERATION (H260) (If
STEREO RADIO OPERATION (H260) (If
STEREO RADIO OPERATION (H260) (If II
II
I nstalled)
nstalled) nstalled)
nstalled)
nstalled)
H260A01O
1. POWER ON-OFF/VOLUME/BALANCE Control Knob
2. FADER Control Knob
3. BASS/TREBLE Control Knob
4. SCAN Button 6. BAND Selector
5. TUNE/SEEK Select Button 7. PRESET Button