2003 GMC SIERRA DENALI service

[x] Cancel search: service

Page 379 of 428

GMC SIERRA DENALI 2003  Owners Manual Part A: Scheduled  Maintenance 
Services 
This part contains engine oil and chassis lubrication  scheduled  maintenance  which  explains the engine oil life 
system  and  how  it indicates  when to ch

Page 380 of 428

GMC SIERRA DENALI 2003  Owners Manual Scheduled  Maintenance 
The  services  shown in this schedule up to 100,000 miles 
(1 66 000 km)  should  be repeated after 100,000 miles 
(1 66 000 km)  at the same  intervals  for the life  of 
this

Page 381 of 428

GMC SIERRA DENALI 2003  Owners Manual If the system is ever reset  accidentally,  you must 
change  your oil at 
3,000 miles (5 000 km) since  your 
last  oil change.  Remember  to  reset the oil life system 
whenever the oil  is changed.

Page 382 of 428

GMC SIERRA DENALI 2003  Owners Manual 22,500 Miles  (37 500 km) 
0 Check readfront  axle fluid  level and add fluid as 
needed.  Check  constant  velocity joints and axle  seals 
for  leaking. 
page  5-62 for  proper  rotation pattern and

Page 383 of 428

GMC SIERRA DENALI 2003  Owners Manual 52,500 Miles (87 500 km) 
U Check  readfront axle fluid  level and add fluid  as 
needed.  Check  constant velocity joints  and axle seals 
for  leaking. 
page  5-62 for proper rotation pattern  and a

Page 384 of 428

GMC SIERRA DENALI 2003  Owners Manual 90,000 Miles (150 000 km) 
0 Check readfront  axle fluid  level and add fluid  as 
needed.  Check  constant  velocity joints and axle seals 
for  leaking. 
0 Replace  fuel  filter. An  Emission  Contr

Page 385 of 428

GMC SIERRA DENALI 2003  Owners Manual Part B: Owner  Checks and Services 
Listed in this part are owner  checks  and  services 
which  should  be  performed  at  the  intervals specified to 
help  ensure  the  safety,  dependability and e

Page 386 of 428

GMC SIERRA DENALI 2003  Owners Manual At Least  Twice  a  Year 
Restraint  System Check 
Make sure the  safety  belt  reminder light and all your 
belts,  buckles, latch  plates, retractors  and  anchorages 
are  working  properly.  Look