2003 FORD SUPER DUTY wiper fluid

MULTI-FUNCTION LEVER
Windshield wiper:Rotate the end
of the control awayfrom you to
increase the speed of the wipers;
rotate towards you to decrease the
speed of the wipers.
Windshield washer:Push the end
of the stalk:
•briefly: causes a single swipe of
the wipers without washer fluid.
•a quick push and hold: the wipers
will swipe three times with
washer fluid.
•a long push and hold: the wipers and washer fluid will be activated for
up to ten seconds.
Changing the wiper blades
1. Pull the wiper arm awayfrom the
vehicle. Turn the blade at an angle
from the wiper arm. Push the lock
pin manuallyto release the blade
and pull the wiper blade down
toward the windshield to remove it
from the arm.
2. Attach the new wiper to the
wiper arm and press it into place
until a click is heard.
3. Replace wiper blades every6 months for optimum performance.
Driver Controls
44

WINDSHIELD WASHER FLUID
Add fluid to fill the reservoir if the
level is low. In verycold weather, do
not fill the reservoir completely.
Onlyuse a washer fluid that meets
Ford specification WSB-M8B16–A2.
Refer toLubricant specifications
in this chapter.
State or local regulations on volatile organic compounds mayrestrict the
use of methanol, a common windshield washer antifreeze additive.
Washer fluids containing non-methanol antifreeze agents should be used
onlyif theyprovide cold weather protection without damaging the
vehicle’s paint finish, wiper blades or washer system.
If you operate your vehicle in temperatures below 4.5° C (40°
F), use washer fluid with antifreeze protection. Failure to use
washer fluid with antifreeze protection in cold weather could result in
impaired windshield vision and increase the risk of injuryor accident.
Note:Do not put washer fluid in the engine coolant reservoir. Washer
fluid placed in the cooling system may harm engine and cooling system
components.
ENGINE OIL
Checking the engine oil
Refer to the scheduled maintenance guide for the appropriate intervals
for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securelylatched in P
(Park) (automatic transmission) or 1 (First) (manual transmission).
4. Open the hood. Protect yourself from engine heat.
Maintenance and Specifications
194

washing ....................................184
waxing .....................................184
wheels ......................................185
wiper blades ............................186
Clutch
fluid ..........................................216
operation while driving ..........109
recommended shift speeds ....110
Compass, electronic ....................53
calibration .................................54
set zone adjustment .................54
Console ........................................51
overhead ....................................45
Controls
power seat .................................66
Coolant
checking and adding ..............199
refill capacities ................203, 228
specifications ..................232, 235
Cruise control
(see Speed control) ....................48
Customer Assistance ................152
Ford accessories for your
vehicle .....................................190
Ford Extended Service
Plan ..........................................177
Getting assistance outside the
U.S. and Canada .....................181
Getting roadside assistance ...152
Getting the service you
need .........................................175
Ordering additional owner’s
literature .................................182
The Dispute Settlement
Board .......................................177
Utilizing the
Mediation/Arbitration
Program ...................................180D
Daytime running lamps
(see Lamps) ................................36
Dipstick
automatic transmission
fluid ..........................................216
engine oil .................................194
Doors
lubricant specifications ..........232
Driveline universal joint and
slip yoke ....................................220
Driving under special
conditions ..................109, 118, 121
sand .........................................120
snow and ice ...........................122
through water .................120, 125
E
Emergencies, roadside
jump-starting ..........................168
Emission control system ..........213
Engine ........................................235
cleaning ...................................185
coolant .....................................199
diesel ...........................................6
fail-safe coolant ......................204
idle speed control ...................197
lubrication
specifications ..................232, 235
refill capacities ........................228
service points ..........................193
starting after a collision .........153
Engine block heater .................102
Engine oil ..................................194
checking and adding ..............194
dipstick ....................................194
filter, specifications ........196, 228
recommendations ...................196
Index
250

fluid, checking and adding
(manual) .................................219
fluid, refill capacities ..............228
lubricant specifications ..232, 235
manual operation ....................109
Turn signal ..................................37
V
Vehicle dimensions ...................235
Vehicle Identification Number
(VIN) ..........................................244
Vehicle loading ..........................125
Ventilating your vehicle ...........102W
Warning lights (see Lights)
.......10
Washer fluid
..............................194
Water, Driving through
.............125
Windows
power
.........................................47
Windshield washer fluid and
wipers
..........................................44
checking and adding fluid
.....194
replacing wiper blades
.............44
Wrecker towing
.........................173
Index
254