2003 FORD MUSTANG steering wheel

[x] Cancel search: steering wheel

Page 23 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Change engine oil and install a new oil filter, lube front lower control arm and steering linkage 
ball joints with zerk fittings (if equipped) every 4,800 km (3,000 miles) or 3 months. 
�z Inspect

Page 25 of 4378

FORD MUSTANG 2003  Workshop Manual �z
If equipped, inspect automatic transmission fluid level with dipstick. 
�z Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system. 
�z Inspect wheel ends for end play

Page 26 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Change engine oil and install a new oil filter. 
�z Inspect tires for wear. Rotation recommended for optimal tire life. 
64,000 Km (40,000 Miles) 
�zChange engine oil and install a new oil filter.

Page 27 of 4378

FORD MUSTANG 2003  Workshop Manual equipped. 
�z If equipped, install new climate controlled seat filters (Navigator, Lincoln LS and Aviator). 
ADDITIONAL INFORMATION: If vehicle is registered in California, the California Air Resource

Page 28 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Inspect wheel ends for end play and noise. 
�z Inspect engine cooling system and hoses. 
�z Inspect exhaust system and heat shields. 
�z Inspect steering linkage, suspension and (if equipped) drive

Page 29 of 4378

FORD MUSTANG 2003  Workshop Manual �z
Change engine oil and install a new oil filter. 
�z Inspect tires for wear. Rotation recommended for optimal tire life. 
184,000 Km (115,000 Miles) 
�zChange engine oil and install a new oil filter

Page 30 of 4378

FORD MUSTANG 2003  Workshop Manual �z
If equipped, inspect automatic transmission fluid level with dipstick. 
�z Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system. 
�z Inspect wheel ends for end play

Page 35 of 4378

FORD MUSTANG 2003  Workshop Manual The angle of the wheel in relation to the true vertical as measured looking from the front of the vehicle. 
Camber is positive when the wheel angle is offset so that the top of the wheel is positioned
Page:   1-8 9-16 17-24 25-32 33-40 ... 104 next >