2003 CHEVROLET VENTURE Owners Manual

Page 313 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Driving on Snow or Ice
Most of the time, those places where your tires meet
the road probably have good traction.
However, if there is snow or ice between your tires and
the road, you can have a very

Page 314 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Unless you have the anti-lock braking system, youll
want to brake very gently, too. (If you do have anti-lock,
see
Braking on page 4-6. This system improves your
vehicles stability when you make a h

Page 315 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual ·Tie a red cloth to your vehicle to alert police that
youve been stopped by the snow.
·Put on extra clothing or wrap a blanket around you.
If you have no blankets or extra clothing, make
body insul

Page 316 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Then, shut the engine off and close the window almost
all the way to preserve the heat. Start the engine
again and repeat this only when you feel really
uncomfortable from the cold. But do it as littl

Page 317 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Notice:Spinning your wheels can destroy parts of
your vehicle as well as the tires. If you spin the
wheels too fast while shifting your transaxle back
and forth, you can destroy your transaxle. See
ª

Page 318 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Towing
Towing Your Vehicle
Consult your dealer or a professional towing service if
you need to have your disabled vehicle towed. See
Roadside Assistance Program on page 7-6.
If you want to tow your ve

Page 319 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Dinghy Towing
Your vehicle was not designed to be towed with all of its
wheels on the ground. If you have a two-wheel-drive
vehicle, it can be towed with two of its wheels on
the ground. See ªDolly T

Page 320 of 486

CHEVROLET VENTURE 2003 1.G Owners Manual Loading Your Vehicle
The Certi®cation/Tire label is found on the rear edge of
the drivers door.
The label shows the size of your original tires and the
in¯ation pressures needed to obtain the gross