2003 ASTON MARTIN DB AR1 Q heating

v
DB AR1 Owner's Guide Contents
Introduction
Vehicle Provenance iii
Warnings, Cautions and Notes vi
General Information vii
Reporting Safety Defects (USA) x
Reporting Safety Defects (Other Markets) x
Regular Checks xi
Glossary of Terms xii
Section 1 - Owner's Guide
Before Driving 1-A-1
Controls 1-B-1
Driving 1-C-1
Heating, Ventilation & Air Conditioning 1-D-1
Security System 1-E-1
Owner Maintenance 1-F-1
Specifications 1-G-1
Section 2 - Service Schedules & Service Records
Service Schedules 2-A-1
Service Records 2-B-1
Section 3 - Warranty and Emergency Service
Warranty 3-A-1
Aston Martin Emergency Service 3-B-1
Section 4 - Dealer Directory
Aston Martin Lagonda Ltd. Worldwide Dealer Directory 4-A-1
Section 5 - Index
Index 5-A-1

B - Controls
1-B-17 The centre console contains the following controls:
• Clock and PATS Status Light
• Heating, Ventilation and Air-Conditioning Controls
• Fog Lamp, Screen Heater and Seat Heater Switches
• Radio Cassette Player (Control for the CD autochanger)
• Hazard Light Switch
• Starter Button
• Traction Control Switch
• Window Lift Switches
• Boot Release Switch
• Cigar Lighter and Ashtray
The Heating, Ventilation and Air-Conditioning Systems are fully described
in the Air-Conditioning section of this Owner's Guide.
Clock
The clock in the centre of the air conditioning control panel is set using the
buttons on the clock panel.
The left button is used to retard the time and the
right button to advance the time.
The small light between the time set buttons is the
PATS Status Light which is described in the Security
section of this Owner's Guide.
ASTON MARTIN

C - Driving
1-C-18Traction Control Operation
WARNING: In all cases it remains the drivers responsibility to drive safely
according to the law and with due regard to prevailing conditions. The fact that
a vehicle is equipped with Traction Control must never allow the driver to be
tempted into taking risks which could affect his/her safety or that of other road
users. The addition of Traction Control cannot overcome the consequences of
applying too much engine power for the prevailing conditions.
The traction control system is designed to limit engine power when driven
wheel slip is detected. This most commonly happens when accelerating on
a slippery road or loose surface.
The system uses the vehicles ABS sensors to monitor the wheel speed of all
four road wheels. As soon as a driven rear wheel starts to spin due to the
application of too much power for the available grip, the system automatically
reduces engine power by temporarily adjusting the fuel supply. The brake
on the slipping wheel will also be applied as necessary until the wheel speed
matches that of the other wheels.
During activation, the system warning light will flash. The driver may
experience a loss in power or temporary 'misfire' as engine power is
reduced. These symptoms are normal and will clear as wheel spin is
eliminated and normal engine power is restored.
If traction control cuts in when driving on extended icy or slippery surfaces,
reduce engine power as necessary until the traction control warning light is
extinguished.
Caution: Do not maintain engine power at such a level that traction control is
activated for long periods (more than about one minute). The reduced fuelling levels
to the engine will cause the exhaust catalysts to overheat. Overheating of the exhaust
catalysts can destroy them.

D - Heating, Ventilation & Air Conditioning
1-D-1
Contents
The Air Conditioning System .............................................................. 1-D-2
Air Conditioning Controls .................................................................. 1-D-5

D - Heating, Ventilation & Air Conditioning
1-D-2
The Air Conditioning System
Note: Air conditioning performance will be degraded due to the general nature
of this vehicle.
The air conditioning system is used to maintain a selected temperature level
within the passenger compartment. The system has heating, ventilation and
air conditioning functions. The system offers other functions such as
humidity control, rapid demisting and defrosting of the windscreen and
recirculation of internal air to avoid drawing unpleasant fumes into the
vehicle.
Heating/Cooling
Incoming air may be heated or cooled to a chosen temperature and then
distributed within the passenger compartment through a number of fixed
and adjustable vents. Once set, the chosen conditions will be maintained by
the computer controlled air-conditioning system.

D - Heating, Ventilation & Air Conditioning
1-D-3
Ventilation
The air from the air-conditioning system is fed into the passenger compartment
through a distribution system with several outlets. The diagram below
illustrates the principal outlet positions.
Face Level Vents
The face level vents are controllable and can be adjusted, horizontally or
vertically. Air supply to these vents is closed off in heating and defrost modes.
To direct the air from any of the face
level vents, rotate the central thumb
wheel left/right or up/down.

D - Heating, Ventilation & Air Conditioning
1-D-4
Door Mounted Vents
The door vents are also controllable and can be set to suit the occupants
requirements.
A lever at the top of each door vent controls the distribution and volume of
air.
In the mid position, unrestricted airflow is available from the door vent and
the side window vent.
Moving the lever towards the window symbol progressively closes off the
door vent and biases airflow to the side window vent.
Moving the lever towards the
•symbol progressively closes off the airflow
to both side window and door vents. This lever position may be used during
demist operations to ensure maximum airflow to the windscreen.

D - Heating, Ventilation & Air Conditioning
1-D-5
Air Conditioning Controls
The air conditioning controls are located on two panels mounted either side
of the clock on the centre console.
Left Panel
The left panel contains the temperature and fan speed controls.
Temperature Control
This control sets the desired in-car temperature for the
system. Incoming air is cooled and then heated or
blended as required to maintain the in-car temperature
at the set level within the operating range of the system.
Fan Speed Control
This five position switch is used to set the fan speed: Off
(Fan symbol), 1-Low, 2-Medium, 3-High and Defrost.
In Defrost mode the fans run at high speed and supply
air to the windscreen and side screen vents only.
When the system is switched Off, (Fan symbol) the
complete system is OFF. The external air inlets are
closed, cutting off fresh air supply from outside the car.