2002 YAMAHA TW200 Owners Manual

EAU00026
DESCRIPTION
1
2
3
4
5
6
7
8
9
2-1
1. Headlight (page 6-30)
2. Fuel cock (page 3-7)
3. Starter(choke) “1“ (page 3-8)
4. Air filter (page 6-12)
5. Battery (page 6-27)6. Helmet holder (page 3-9)
7. Rear carrier (page 3-10)
8. Shift pedal (page 3-4)
123456 7
8
Left view
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 8

DESCRIPTION
1
2
3
4
5
6
7
8
9
2-2
9. Fuse (page 3-6)
10. Kick starter (page 3-8)
11. Rear brake pedal (page 3-5)
12. Tool kit (page 6-1)
910
11
12
Right view
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 9

1
2
3
4
5
6
7
8
9
DESCRIPTION
2-3
13. Clutch lever (page 3-4, 6-18)
14. Left handlebar switches (page 3-3)
15. Speedometer (page 3-2)
16. Right handlebar switches (page 3-3)
17. Front brake lever (page 3-5, 6-18)18. Throttle grip (page 6-14, 6-24)
19. Fuel tank cap (page 3-5)
20. Main switch (page 3-1)
13 14 15 16 17
18
19
20
Controls/Instruments
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 10

3-1
LOCKOFFON
EAU00029
Main switch/Steering lock
The main switch controls the igni-
tion and lighting systems. Its oper-
ation is described below.
EAU00032
ON:
All electrical circuits are switched
on, and the headlight, meter light,
taillight and front position lights
come on. The engine can be start-
ed. The key cannot be removed in
this position.
EAU00038
OFF:
All electrical circuits are switched
off. The key can be removed in this
position.
EAU00042
LOCK:
The steering is locked in this posi-
tion and all electrical circuits are
switched off.
The key can be removed in this
position.
To lock the steering, turn the han-
dlebars all the way to the left. With
the key at “OFF”, push it into the
main switch and release it, turn it
counterclockwise to “LOCK” and
remove it.
To release the lock, turn the key to
“OFF”.
EW000016
w
Never turn the key to “OFF” or
“LOCK” when the motorcycle is
moving. The electrical circuits will
be switched off which may result
in loss of control or an accident. Be
sure the motorcycle is stopped
before turning the key to “OFF” or
“LOCK”.
EAU00027
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 11

3-2
123
EAU00056Indicator lights
EAU00059Turn indicator light “TURN”
This indicator flashes when the
turn switch is moved to the left or
right.
EAU00062Neutral indicator light “NEUTRAL”
This indicator comes on when the
transmission is in neutral.
1. Turn indicator light “TURN”
2. High beam indicator light
“HIGH BEAM”
3. Neutral indicator light “NEUTRAL”
EAU00064
High beam indicator light “HIGH
BEAM”
This indicator comes on when the
headlight high beam is used.
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
1
2
EAU00098Speedometer
The speedometer shows riding
speed.
This speedometer is equipped with
an odometer.
1. Speedometer
2. Odometer
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 12

3-3
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
1
23
EAU00118Handlebar switches
EAU00122Dimmer switch “LIGHTS”
Turn the switch to “HI” for the high
beam and to “LO” for the low
beam.
EAU00128Turn signal switch “TURN”
This is a three-position switch. The
center position is off.
Turn to “L” to turn on the left
flasher, and to “R” for the right
flasher. Be sure to turn the switch
off after completing a turn.
1. Dimmer switch “LIGHTS”
2. Turn signal switch “TURN”
3. Horn switch “HORN”
EAU00130Horn switch “HORN”
Press the switch to sound the horn.1
2
EAU00137
Engine stop switch “ENGINE
STOP”
The engine stop switch is a safety
device for use in an emergency
such as when the motorcycle over-
turns or if trouble occurs in the
throttle system. Turn the switch to
“RUN” to start the engine. In case
of emergency, turn the switch to
“OFF” to stop the engine.
1. Engine stop switch “ENGINE STOP”
2. Start switch “START”
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 13

3-4
EAU00141Start switch “START”
The starter motor cranks the
engine when pushing the start
switch.
EC000005
cC
See starting instructions prior to
starting the engine.
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
EAU00152Clutch lever
The clutch lever is located on the
left handlebar, and the ignition cir-
cuit cut-off system is incorporated
in the clutch lever holder. Pull the
clutch lever to the handlebar to dis-
engage the clutch, and release the
lever to engage the clutch. The
lever should be pulled rapidly and
released slowly for smooth clutch
operation. (Refer to the engine
starting procedures for a descrip-
tion of the ignition circuit cut-off
system.)
1
N5
4
3
2
1
EAU00157
Shift pedal
This motorcycle is equipped with a
constant-mesh 5-speed transmis-
sion.
The shift pedal is located on the
left side of the engine and is used
in combination with the clutch
when shifting.
N. Neutral
1. Shift pedal
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 14

3-5
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
1
2
EAU00158Front brake lever
The front brake lever is located on
the right handlebar. Pull it toward
the handlebar to apply the front
brake.
1. Unlock
2. Open
EAU00162Rear brake pedal
The rear brake pedal is on the right
side of the motorcycle. Press down
on the brake pedal to apply the
rear brake.
EAU00177
Fuel tank cap
TO OPEN:
Insert the key and turn it 1/4 turn
counterclockwise. Turn the cap 1/3
turn counterclockwise and remove
it from the tank.
TO CLOSE:
Put the cap in the filler neck and
turn it 1/3 turn clockwise. Lock the
cap by turning the key 1/4 turn
clockwise, and remove the key.
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 15