2002 YAMAHA T105 Owners Manual

Position Function Key removal
EAB00000
CONTROL FUNCTIONS
EAB00100Main switch
The main switch controls the ignition and lighting systems. Its operation is described
below.
9
ON
Electrical circuits are switched on.
The engine can be started.Cannot be removed.
Can be removed.
Can be removed. All electrical circuits are switched off.
The steering is locked and all
electrical circuits are switched off. OFF
LOCK
5SD O/M-1 9/4/01 2:49 PM Page 9 (1,1)

EAB10000Indicator lights
10
&qw
e r
1. High beam indicator light
2. Turn signal indicator light
3. Gear position indicator light
4. Neutral indicator light
Description Function
High beam indica-
tor light “&”:
Turn signal indica-
tor light “ ”:
Gear position
indicator light
“1” “2” “3” “4”:
Neutral indicator
light “N”:Lights when the
headlight high
beam is used.
Flashes when the
turn switch is
“ON”.
Light when the
transmission is in
1st,2nd,3rd,4th(top)gear.
Lights when the
transmission is in
neutral.
5SD O/M-1 9/4/01 2:49 PM Page 10 (1,1)

Fuel gauge Instrument panel
11
&
q we
1. Speedometer 2. Odometer
3. Fuel gauge
Description Function
Speedometer
OdometerShows riding speed.
Shows accumulat-
ed mileage.
Shows the fuel level
in the fuel tank.
Remaining fuel is
about 1.0 L at “E”
position.
5SD O/M-1 9/4/01 2:49 PM Page 11 (1,1)

Position Function Handlebar switches
Dimmer switch
Turn signal switch
12
q
1. Dimmer switch
w
2. Turn signal switch
Position Function
&(HI)
% (LO)Turns on the headlight high
beam.
Turns on the headlight low
beam.4
6
OFFTurns on the left flasher.
Turns on the right flasher.
Turns off the flasher.
Push the switch in after it has
returned to center position.
∇
5SD O/M-1 9/4/01 2:49 PM Page 12 (1,1)

Horn switch
Lights switch
Start switch
13
e
3. Horn switch
r
4. Lights switch
t
5. Start switch
Position Function
*
(HORN)The horn sounds when push-
ing the switch.Position Function
STARTThe starter motor cranks the
engine when pushing the
switch.Position Function
ON
OFF
Headlight, taillight and meter lights
comes on when engine is running.
Headlight, taillight and meter lights
does not come on.
5SD O/M-1 9/4/01 2:49 PM Page 13 (1,1)

EAB80001Shift pedal
This motorcycle is equipped with a con-
stant-mesh 4-speed transmission. The shift
pedal is located on the left side of the en-
gine.EAB90001Front brake lever
The front brake lever is located on the right
handlebar. Pull it toward the handlebar to
apply the front brake.
14
q
1. Shift pedal N. Neutral
q
1. Front brake lever
5SD O/M-1 9/4/01 2:49 PM Page 14 (1,1)

EAB90101Rear brake pedal
The rear brake pedal is on the right side of
the motorcycle. Press down on the brake
pedal to apply the rear brake.EAC01300*Fuel tank cap
To add fuel, open the seat. Then remove
the fuel tank cap by turning it counterclock-
wise.
(See page 18 to open the seat.)
15
q
1. Rear brake pedal
q
1. Fuel tank cap
5SD O/M-1 9/4/01 2:49 PM Page 15 (1,1)

EAC20100Starter lever 1
The starter lever is located on the left han-
dlebar. Starting a cold engine requires a
richer fuel mixture. In such a case, turn the
starter lever to the left. After the engine is
warm, turn the lever to its original position.EAC60700Kick starter
Rotate the kick starter away from the en-
gine. Push the starter down lightly with
your foot until the gears engage, then kick
smoothly and forcefully to start the engine.
16
q
1. Starter lever
q
1. Kick starter
5SD O/M-1 9/4/01 2:49 PM Page 16 (1,1)