2002 ISUZU AXIOM instrument panel

8D±2
WIRING SYSTEM
Fuse, Relay and Diode
Relay / Fuse Box Location
810R200003
Legend
(1) Relay/Fuse Box (Engine Room)
(2) Relay/Fuse Box (Instrument Panel)

8D±3
WIRING SYSTEM
Relay / Fuse Box (Instrument Panel)
D08RY00529
Legend
(1) Fuse/Relay Box
(2) Diode
(3) Diode
(4) Tail Relay
(5) Not Used
(6) ACC Socket Relay
(7) Power Window Relay
(8) Not Used
(9) Rear Defogger Relay
(10) Fuse ACC Socket (15A)
(11) Fuse Audio (+B) (15A)
(12) Fuse Starter (10A)
(13) Fuse Tail (15A)
(14) Fuse Room Lamp (10A)
(15) Fuse Stop Lamp (15A)
(16) Fuse Door Lock (20A)
(17) Fuse Mirror Defogger (10A)(18) Fuse Rear Defogger (15A)
(19) Fuse Rear Defogger (15A)
(20) Fuse Meter (15A)
(21) Fuse ENG. (15A)
(22) Fuse IG. Coil (15A)
(23) Fuse Back Up (15A)
(24) Fuse ELEC. IG. (15A)
(25) Fuse RR Wiper (10A)
(26) Fuse FRT Wiper (20A)
(27) Fuse Audio (ACC) (10A)
(28) Fuse Cigar Lighter (15A)
(29) Fuse Anti-theft (10A)
(30) Fuse SRS (10A)
(31) Fuse (Not Used)
(32) Circuit Breaker Power Window (30A)
(33) Spare Fuse (20A)
(34) Spare Fuse (15A)
(35) Spare Fuse (10A)

8E±6METER AND GAUGE
Removal
1. Disconnect the battery ground cable.
2. Remove the Dash Side Trim Panel ±LH.
3. Remove the lower cover Assembly(2).

Refer to
Instrument Panel Assembly in Body
Structure
section.
4. Remove the meter cluster Assembly(1).

Refer to
Instrument Panel Assembly in Body
Structure
section.
821R200020
5. Remove the meter assembly(3).

Remove four fixing screws.

Disconnect the meter connectors.
825RW197
CAUTION: The removed meter assembly should be
placed upright or with its face side up.
Installation
To install, follow the removal steps in the reverse order.
Warning Light Bulb and Indicator Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the meter assembly.

Refer to
Meter Assembly in this section.
3. Remove the bulb.

Hold the bulb socket by hand, rotate it
counterclockwise and pull it out.
Installation
To install, follow the removal steps in the reverse order.

8F±1 BODY STRUCTURE
AXIOM
BODY AND ACCESSORIES
BODY STRUCTURE
CONTENTS
Service Precaution 8F±2. . . . . . . . . . . . . . . . . . . . . .
Frame 8F±2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Description 8F±2. . . . . . . . . . . . . . . . . . . . .
Frame Dimensions 8F±3. . . . . . . . . . . . . . . . . . . .
General Description (Bumper) 8F±4. . . . . . . . . . . .
Front Bumper 8F±4. . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±4. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±5. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Bumper 8F±7. . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±7. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±8. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±9. . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Description (Sheet Metal) 8F±10. . . . . . . . .
Engine Hood 8F±10. . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±10. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±11. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±11. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Hood Lock 8F±13. . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±13. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±13. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±14. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Fender Panel 8F±15. . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±15. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±16. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±16. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Body Mounting 8F±18. . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±18. . . . . . . . . . . . . . . . . . . . . . . .
Tightening Torque 8F±18. . . . . . . . . . . . . . . . . . . . . . .
Body Dimension 8F±19. . . . . . . . . . . . . . . . . . . . . . . .
Front Section 8F±19. . . . . . . . . . . . . . . . . . . . . . . . .
Room Section (Front Side) 8F±22. . . . . . . . . . . . . .
Room Section (Rear Side) 8F±24. . . . . . . . . . . . . .
Rear Section 8F±26. . . . . . . . . . . . . . . . . . . . . . . . . .
Side Body Section (Front side) 8F±28. . . . . . . . . .
Side Body Section (Rear side) 8F±30. . . . . . . . . .
General Description (Body) 8F±32. . . . . . . . . . . . . . .
Instrument Panel Assembly 8F±32. . . . . . . . . . . . . . .
Parts Location 8F±32. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 8F±34. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Door Assembly 8F±35. . . . . . . . . . . . . . . . . . . .
Parts Location 8F±35. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±35. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±36. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Door Assembly 8F±37. . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±37. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±37. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±38. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Window Regulator, Glass and Glass
Run 8F±39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±39. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±40. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±41. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Window Regulator, Glass and Glass
Run 8F±42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±42. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±43. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±45. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tailgate 8F±46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±46. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±47. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±48. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spare Tire Hanger 8F±49. . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±49. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±50. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±50. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windshield 8F±51. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±51. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±51. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±52. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Quarter Glass 8F±55. . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±55. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±55. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±56. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tailgate Glass 8F±57. . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location 8F±57. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8F±57. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8F±58. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specifications 8F±59. . . . . . . . . . . . .

8F±32BODY STRUCTURE
General Description (Body)
This publication contains essential removal, installation,
adjustment and maintenance procedures.
Instrument Panel Assembly
Parts Location
740R200024
Legend
(1) Cross Beam
(2) Vent Duct Assembly
(3) Instrument Panel Stay
(4) Passenger Air Bag
(5) Passenger Air Bag Cover
(6) Dash Side Trim Panel (RH)
(7) Instrument Upper Reinforcement
(8) Glove Box Side Reinforcement
(9) Passenger Lower Bracket
(10) Glove Box
(11) Display Unit
(12) Audio Kit(13) Front Console Assembly
(14) Knee Pad
(15) Center Cluster Assembly
(16) Cluster Upper Cover
(17) Instrument Panel Driver Lower Cover
Assembly
(18) Driver Knee Bolster Assembly
(19) Dash Side Trim Panel (LH)
(20) Meter Cluster Assembly
(21) Instrument Panel Center Reinforcement
(22) Meter Assembly
(23) Instrument Panel Assembly
(24) Instrument Harness Assembly

8F±33 BODY STRUCTURE
Removal
CAUTION: F o r p recautions on installation or
removal of SRS ± air bag system, refer to
Supplemental Restraint System (SRS) ± AIR BAG in
Restraint section.
1. Disconnect the battery ground cable.
2. Pry the knee pads (4).
3. Remove the cluster upper cover (1) and connectors.
4. Remove the center cluster assembly (2).

Remove six screws and pull out the cluster at the six
clip positions.

Disconnect the cigarette lighter (6), ash tray (5)
illumination and hazard switch (3) connectors.
740R200008
5. Remove the display unit.

Remove the four fixing screws and connectors.
6. Remove the audio kit.

Remove the four fixing screws and connectors.
7. Remove the front and rear consoles.

Refer to
Consoles in Exterior/Interior Trim section.
8. Remove the dash side trim panels.

Remove the sill plates, then remove the trim panels.
9. Remove the glove box.

Remove the two fixing screws.
470RW002
10. Remove the instrument panel driver lower cover
assembly.

Remove the engine hood opener two fixing screws
and another one fixing screw.
After four clips are pried, disconnect switch
connector and duct.
610R200007
11. Remove the meter cluster assembly.

Remove the six fixing screws and switch
connectors.
12. Remove the meter assembly.

Remove the four fixing screws and disconnect the
connectors.
13. Remove the driver knee bolster assembly.

Remove the six fixing bolts and screw.
14. Remove the instrument panel assembly.
CAUTION: F o r p recautions on installation or
removal of SRS ± air bag system, refer to
Supplemental Restraint System (SRS) ± AIR BAG in
Restraint section.

8F±34BODY STRUCTURE

Disconnect the instrument harness connectors (six
connectors on the driver's side, three connectors
on the passenger side and two connectors on the
center side).

Disconnect radio antenna cable plug and the
ground cable fixing bolts from dash side panel.

Remove the two fixing bolts of passenger air bag
assembly and disconnect the connector.

Remove the two fixing screws from fuse box.

After pry the three hole cover from the surface of
instrument panel, remove the three nuts.

Remove the six bolts and one screw.
740R200022
15. Remove the passenger air bag (1).

Remove the four fixing nuts.
CAUTION: F o r p recautions on installation or
removal of SRS ± air bag system, refer to
Supplemental Restraint System in Restraint section.
827RY00004
16. Remove the vent duct assembly.

Remove the five fixing screws.17. Remove the passenger lower bracket.

Remove the three screws.
18. Remove the glove box side reinforcement.
19. Remove the instrument upper reinforcement.

Remove the nine screws.
20. Remove the instrument panel center reinforcement.

Remove the six screws.
21. Remove the instrument panel harness assembly (1).

Remove the clips.
740R200023
22. Remove the instrument panel stays.

Remove the two fixing nuts and two fixing bolts for
each bracket.
23. Remove the cross beam.

Remove the five fixing nuts, two fixing bolts (upper)
and six fixing bolts (lower).
840RW005
Installation
To install, follow the removal steps in the reverse order.

8H±14SECURITY AND LOCKS
Anti-Theft System
General Description
The circuit consists of the starter switch, anti±theft &
keyless entry controller, anti±theft horn, front door and
tailgate key switch (detect and tamper) switch, door lock
actuator for each door, engine hood switch, clutch start
switch (M/T), ANTI±THEFT indicator light and mode
switch (A/T).
The system operates as follows: After locking the starter
switch and removing the starter key (this sets the alarm),
if the door is unlocked in any way other than with the
proper key, the headlights will start flashing, the horn
sounds, and the starter circuit is disabled. (However, the
engine hood and all the doors must be locked and closed.)
Once the system has been placed in the warning or alarm
condition, it can be released only when the starter switch
is shifted from ªOFFº to ªACCº by the starter key, or when
the lock of the front door or the tailgate is released (to
activate the detect switch) by the starter key.
Anti±Theft & Keyless Entry Control-
ler
Removal
1. Disconnect the battery ground cable.
2. Remove the glove box from the instrument panel
assembly (1).

Refer to
the Instrument Panel Assembly in Body
Structure section.
3. Remove the anti±theft & keyless entry controller (2).

Disconnect the connector.

Remove two fixing screws.
826RW007
Installation
To install, follow the removal steps in the reverse order.
Anti±Theft Indicator
Removal and Installation
Refer to GPS in Entertainment section.
Anti±Theft Horn
Removal
1. Disconnect the battery ground cable.
2. Remove the anti±theft horn (1).

Disconnect the connector.

Remove a fixing bolt.
828RW001
Installation
To install, follow the removal steps in the reverse order.