2002 BUICK RANDEZVOUS door lock

2-8
Automatic Door Lock/Unlock
All of the doors will automatically lock when all
doors are closed, the engine is running and the shift
lever is shifted out of PARK (P). All of the doors will
automatically unlock when the shift lever is shifted
into PARK (P).
With the automatic door lock feature, you can still
lock or unlock the doors at any time, either manually,
with the power door lock switches or by pressing
LOCK on the optional remote keyless entry transmitter.
See ªRemote Keyless Entryº in the Index for
more information.
To program the automatic door lock feature, see
ªVehicle Customizationº in the Index. If your vehicle
is equipped with the Driver Information Center (DIC),
see ªDriver Information Centerº in the Index.
Rear Door Child Security Locks
Your vehicle is equipped with rear door security locks
that help prevent passengers from opening the rear doors
on your vehicle from the inside. To use one of these
locks do the following:
1. Open one of the rear doors.
2. On the inside of the rear
door will be a lock. Push
the lever up to engage
the safety lock.
3. Close the door.
4. Repeat Steps 1 through 3 for the other rear door lock.
The rear doors on your vehicle cannot be opened from
inside the vehicle when this feature is in use. If you
want to open the rear door when the security lock is on,
unlock the door from the inside and then open the door
from the outside.

2-9
Canceling the Rear Door Child Security Locks
1. Unlock and open the rear door from the outside.
2. Push the lever down to disengage the safety lock.
3. Close the door.
4. Repeat Steps 1 through 3 for the other rear door lock.
The rear door locks will now work normally.
Lockout Prevention
The lockout prevention feature makes it difficult for you
to lock your keys in your vehicle. If any door is open
while the key is in the ignition, pressing the front of a
power door lock switch will lock all doors, then unlock
the driver's door.
If you leave the key in your vehicle but not in the
ignition or if you use the manual door lock, you could
still lock the key in the vehicle. Always remember to
take the key with you.
Leaving Your Vehicle
If you are leaving the vehicle, take your key, open your
door and set the locks from the inside. Then get out and
close the door.
Remote Keyless Entry
System (Option)
With this feature, you
can lock and unlock
your doors from about
3 feet (1 m) up to
30 feet (9 m) away
using the remote
keyless entry
transmitter supplied
with your vehicle.
Your remote keyless entry system operates on a radio
frequency subject to Federal Communications
Commission (FCC) Rules and with Industry Canada.

2-11 Operation
Remote Driver Door Unlock
When you press UNLOCK on the remote keyless entry
transmitter, only the driver's door will unlock. If you
press UNLOCK again within five seconds, the
passenger's doors will unlock.
If you would like all the doors to unlock the first time you
press UNLOCK, see ªVehicle Customizationº in the Index.
The UNLOCK button on the remote keyless entry transmitter
will disarm the optional content theft
-deterrent system. See
ªContent Theft
-Deterrentº in the Index for more information.
Remote All Door Lock
To lock all doors, press LOCK on the remote keyless
entry transmitter.
The LOCK button on the remote keyless entry
transmitter will arm the optional content theft
-deterrent
system. See ªContent Theft
-Deterrentº in the Index for
more information.
Remote Liftgate Unlock
To unlock the liftgate, press REAR on the remote
keyless entry transmitter. See ªLiftgateº in the Index for
more information.Remote Lock Confirmation
When you use the remote keyless entry transmitter to
lock your vehicle, the headlamps and parking lamps will
flash briefly to let you know the command has been
received. If you press the LOCK button again, within
five seconds, the horn will sound briefly to let you know
the vehicle is already locked.
If you would like to change the way the headlamps,
parking lamps and horn operate with remote lock
confirmation, see ªVehicle Customizationº in the Index.
If your vehicle is equipped with the Driver Information
Center (DIC), see ªDriver Information Centerº in
the Index.
Remote Unlock Confirmation
When you use your remote keyless entry transmitter to
unlock your vehicle, the headlamps and parking lamps
will flash briefly during the day or the perimeter lighting
will flash briefly at night to let you know the command
was received.
If you would like to change the way the headlamps and
parking lamps operate with remote unlock confirmation,
see ªVehicle Customizationº in the Index. If your
vehicle is equipped with the Driver Information Center
(DIC), see ªDriver Information Centerº in the Index.

2-16
Before your vehicle was shipped from the factory, it was
programmed in Mode 3. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for ªEntering Programming
Modeº listed previously.
2. Turn the exterior lamp control from the off position
to the parking lamp position.
3. Count the number of chimes you hear. The number of
chimes indicates the vehicle's current programmed
mode. If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.
4. Turn the exterior lamp control from the off position to
the parking lamp position to change the current mode.
5. Turn the exterior lamp control from the off position
to the parking lamp position until you hear the
number of chimes corresponding to the mode
selection you want.
The mode you selected is now set. You can either exit
programming mode by following the instructions later in
this section or program the next feature available on
your vehicle.Automatic Door Lock/Unlock
This feature allows you to lock and unlock your
doors automatically.
Programmable Modes
Mode 1: Both Features Off (Automatic door locking
and unlocking is disabled. You will always need to
lock your doors manually before driving to increase
occupant safety.)
Mode 2: Automatic Door Locking Only

Shift out of PARK (P) with the ignition on and the
driver's door closed; all doors will lock automatically.

The automatic door unlock feature is turned off.
Mode 3: Automatic Door Locking with shift out
of PARK (P)/Driver's Door Unlocking with shift
into PARK (P)

Shift out of PARK (P) with the ignition on and the
driver's door closed; all doors will lock automatically.

Shift into PARK (P) with the ignition on; driver's
door only will unlock automatically.

2-17
Mode 4: Automatic Door Locking with shift out of
PARK (P)/All Door Unlocking with shift into PARK (P)

Shift out of PARK (P) with the ignition on and the
driver's door closed; all doors will lock automatically.

Shift into PARK (P) with the ignition on; all doors
will unlock automatically.
Mode 5: Automatic Door Locking with shift out of
PARK (P)/Driver's Door Unlocking with Key Removal

Shift out of PARK (P) with the ignition on and the
driver's door closed; all doors will lock automatically.

Remove the key; only the driver's door will
unlock automatically.
Mode 6: Automatic Door Locking with shift out of
PARK (P)/All Door Unlocking with Key Removal

Shift out of PARK (P) with the ignition on and the
driver's door closed; all doors will lock automatically.

Remove the ignition key; all doors will
unlock automatically.Before your vehicle was shipped from the factory, it was
programmed in Mode 4. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for ªEntering Programming
Modeº listed previously.
2. Press the front of the power door lock switch.
3. Count the number of chimes you hear. The number
of chimes indicates the vehicle's current programmed
mode. If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.
4. Press the front of the power door lock switch to
change the current mode.
5. Press the front of the power door lock switch until
you hear the number of chimes corresponding to the
mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

2-18
Delayed Locking
This feature allows you to delay the locking of
your doors.
Programmable Modes
Mode 1: Off (Doors will always lock immediately when
you lock the doors using the power door lock switch or
the optional remote keyless entry transmitter.)
Mode 2: Delayed Locking (If the power door lock
switch or the optional remote keyless entry transmitter is
used to lock the vehicle while any door is open, you will
hear three chimes. The doors will not lock. Five seconds
after the last door is closed, all doors will lock.)
Before your vehicle was shipped from the factory, it was
programmed in Mode 2. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:1. Follow the instructions for ªEntering Programming
Modeº listed previously.
2. Press the back of the power door lock switch.
3. Count the number of chimes you hear. The
number of chimes indicates the vehicle's current
programmed mode. If you do not wish to change
the current mode, you can either exit the
programming mode by following the instructions
later in this section or program the next feature
available on your vehicle.
4. Press the back of the power door lock switch to
change the current mode.
5. Press the back of the power door lock switch until
you hear the number of chimes corresponding to the
mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

2-19 Remote Driver's Door Unlock
This feature allows you to customize the UNLOCK
button on the remote keyless entry transmitter.
Programmable Modes
Your vehicle can be programmed to one of the
following modes.
Mode 1: Remote All Doors Unlock (When you press
UNLOCK on your remote keyless entry transmitter, all
doors will unlock.)
Mode 2: Remote Driver's Door Unlock Only
(When you press UNLOCK on your remote keyless
entry transmitter once, the driver's door will unlock.
When you press UNLOCK on your remote keyless
entry transmitter again within five seconds, all doors
will unlock.)
Before your vehicle was shipped from the factory, it was
programmed in Mode 2. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for ªEntering Programming
Modeº listed previously.2. Press UNLOCK on the remote keyless
entry transmitter.
3. Count the number of chimes you hear. The number of
chimes indicates the vehicle's current programmed
mode. If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.
4. Press UNLOCK on the remote keyless entry
transmitter to change the current mode.
5. Press UNLOCK on the remote keyless entry
transmitter until you hear the number of chimes
corresponding to the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Remote Lock and Unlock Confirmation
This feature allows you to customize the feedback
received when locking or unlocking your vehicle with
the remote keyless entry transmitter.

2-22
Liftgate Release
To open the liftgate do one of the following:

press the liftgate release
switch, which is located
on the center console
switchbank, or

press REAR on the optional remote keyless
entry transmitter.
Your vehicle must be in PARK (P) or NEUTRAL (N)
for the liftgate to release.
The liftgate will lock when closed. You will have to use
one of the previous options to open the liftgate again.
Theft
Vehicle theft is big business, especially in some cities.
Although your vehicle has a number of theft
-deterrent
features, we know that nothing we put on it can make
it impossible to steal. However, there are ways you
can help.
Key in the Ignition
If you leave your vehicle with the keys inside, it's an
easy target for joy riders or professional thieves
-- so
don't do it.
When you park your vehicle and open the driver's door,
you'll hear a chime reminding you to remove your key
from the ignition and take it with you. Always do this.
Your steering wheel will be locked, and so will your
ignition and transaxle. Also remember to lock the doors.