1
General information and controls
13A
B
2
1
D
Helmet holder
• Turn key in helmet/seat lock to position B.
• The helmet holder 2 is open
• Close the helmet holder by pressing it lightly into the hel-
met/seat lock until it engages
Removing cover of
stowage compartment:
• Turn the key in the helmet/seat lock to position A
•Cover 1 is released from its
holder •Remove cover
1 in direction
indicated by arrow C
– You now have access to the toolkit and the on-board doc-
umentation. You can also
remove the front seat
• Lift off the front seat in the direction indicated by arrow D
– You now have access to the fuses (
b Maintenance
Instructions, Chapter 2)
Seat/helmet holder
C
10r28FUNbkg1.book Seite 13 Dienstag, 24. Januar 2006 9:31 09
1
General information and controls
14
54
3
1
2
Locking cover of stowage
compartment:
e Caution:
When installing, make sure the
cover is firmly seated.
• Engage the front seat in catches 5 and 4 on left and
right and push it into guide 1• Push the cover to the rear into
lock 2 and engage the seat
holder 3 by
pressing it lightly
Seats
10r28FUNbkg1.book Seite 14 Dienstag, 24. Januar 2006 9:31 09
