2002 BMW MOTORRAD R 1150 R brake

i
2
Introduction
General information and
controls
General view, left side ........... 4
General view, right side ......... 5
Cockpit ................................. 6
Telltale and warning lights ..... 7
Ignition switch and steering
lock .................................... 8-9
Left handlebar fitting ........... 10
Right handlebar fitting ......... 11
Hazard warning flashers ...... 12
Seat/helmet holder .............. 13
Seats ............................. 14-15
System case .................. 16-18Safety check
Checklist ............................. 19
Engine oil ....................... 20-21
Fuel ................................ 22-23
Handlebar levers ............ 24-25
Brake system -
general........................... 26-27
Brake system - without
BMW Integral ABS ......... 28-30
Brake system - with
BMW Integral ABS ......... 31-34
Clutch ................................. 35
Lights ............................. 36-39
Shock-absorber
adjustment .......................... 40
Suspension
spring preload ..................... 41
Wheels ........................... 42-43
Accessories and loads ... 44-45
Contents
10r28FUNbkg1.book Seite 2 Dienstag, 24. Januar 2006 9:31 09

3
i
Introduction
Starting – Riding – Parking
Your first journey ........... 46-47
Important notes ............. 48-49
Side stand ..................... 50-51
Centre stand ................. 52-53
Running in ..................... 54-55
Before you start ............. 56-57
Starting ......................... 58-59
Telltale and warning
lights ............................. 60-61
Riding, gear shifts.......... 62-63
Brake system
- general ........................ 64-65
Brake system - with
BMW Integral ABS......... 66-72
BMW Integral ABS
- Fault table ......................... 73Arrive safely
Reliability ........................74-75
Service worldwide ............... 76
Environmental protection .... 77
BMW rider's equipment ....... 78
BMW motorcycle
equipment ........................... 79
Training means extra
safety .................................. 80
Concluding thoughts ........... 81
Contents
10r28FUNbkg1.book Seite 3 Dienstag, 24. Januar 2006 9:31 09

1
General information and controls
5
1314181615
17
1920
24232221
13Luggage carrierOE
14Case carrierOE
15Storage compartment for
toolkit
16 Fuse box (
b Maintenance
Instructions, Chapter 2)
17 Air filter (
b Maintenance
Instructions, Chapter 2)
18 Fuel filler cap (
b 22)
19 Brake fluid reservoir for front
brake (
b 29, 33)
OEOptional equipment
20Type plate/vehicle identifi-
cation number
21 Primary spark plug, right
22 Secondary spark plug, right
23 Brake fluid reservoir for rear
brake (
b 30, 34)
24 Helmet/seat lock (
b 13)
( ) Figure in brackets
bpage number with explanation
General view, right side
10r28FUNbkg1.book Seite 5 Dienstag, 24. Januar 2006 9:31 09

1
General information and controls
11
BA
C
9
10
87
6
d Warning:
To prevent air from entering
the brake system:
• Do not turn the fitting on the handlebar.
• Do not turn the handlebars
in the clamping blocks.
6 Switch for heated handlebar
grips
SA
A Heating off
B 50% (centre position)
C 100% 7
Starter button
8 Emergency igniti on off (kill)
switch (
b 56)
9 Turn-indicator cancel
switch
•Press
– Left/right indicators off
10 Right turn indicator switch
•Press
– Turn indicators flash
To switch off:
• Press turn indicator cancel
switch 9
OEOptional extra
Right handlebar fitting
10r28FUNbkg1.book Seite 11 Dienstag, 24. Januar 2006 9:31 09

2
19
2
Safety check
Checklist
Use the safety checklist –
before every journey
Please perform the safety
check accurately. If your motor-
cycle needs any routine mainte-
nance, you can then attend to it
before the journey starts
(
b Maintenance Instructions),
or, for example have it carried
out by your authorised BMW
motorcycle dealer.
This is to ensure that your
motorcycle corresponds with
road-vehicle use and safety
laws.
Your vehicle must be in perfect
technical order: this is a basic
prerequisite for your safety and
the safety of other road users.
For this reason, check the
details in the following sections
before you start the journey:
– Engine oil level
–Fuel level
– Positions of the handlebar- lever fittings
– Brake fluid level
– Clutch fluid level
–Brakes – Warning lights and telltale
lights
–Lights
– Shock-absorber setting and spring preload
– Condition of wheels and tyres, tread depth and tyre
pressures
– Load, gross weight
– Check at regular intervals as described in the following
sections
(each time you stop for refuel-
ling):
– Engine oil level (every second or third time
you stop for refuelling):
– Brake pads
If you encounter any problems
or difficulties, it is always best to
contact your authorised BMW
Motorrad dealer.
He will provide the necessary
advice and assistance.
10r28FUNbkg1.book Seite 19 Dienstag, 24. Januar 2006 9:31 09

2
25
2
Safety check
41
A
Adjusting handbrake lever
d Warning:
To prevent air from entering
the hydraulic circuit of the
brake system:
• Do not turn the fitting on the handlebar.
• Do not turn the handlebars
in the clamping blocks. • Turn knob
A to set the most
comfortable span:
– Setting 1: minimum distance
– Setting 4: maximum distance
Handlebar levers
10r28FUNbkg1.book Seite 25 Dienstag, 24. Januar 2006 9:31 09

22
26
Safety check
Brake system - general
Work on the brake system
d Warning:
To ensure reliability have all
work on the brake systems
carried out by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
Checking the brake
system
d Warning:
Sudden changes in play or
spongy action of the brake le-
ver indicate a fault in the
brake system.
Before riding off, therefore,
always check the resistance
of the front and rear brake le-
vers and test operation of the
brakes.
Do not ride the motorcycle if
you have any doubts about
the safety of the brake sys-
tem.
Immediately seek the advice
of a specialist workshop,
preferably an authorised
BMW motorcycle dealer.
10r28FUNbkg1.book Seite 26 Dienstag, 24. Januar 2006 9:31 09

2
27
2
Safety check
Brake system - general
Checking brake pads
d Warning:
Have the brake pads replaced
before they wear to the mini-
mum permissible thickness:
have the work performed
by a specialist workshop,
preferably an authorised
BMW motorcycle dealer. Brake pad wear depends on
your personal style of riding.
To ensure reliable operation of
the brakes: do not allow lining
thickness to fall below minimum
value (Maintenance Instruc-
tionsb Chapter 2).
10r28FUNbkg1.book Seite 27 Dienstag, 24. Januar 2006 9:31 09