2002 BMW MOTORRAD R 1150 R brake fluid

1
General information and controls
5
1314181615
17
1920
24232221
13Luggage carrierOE
14Case carrierOE
15Storage compartment for
toolkit
16 Fuse box (
b Maintenance
Instructions, Chapter 2)
17 Air filter (
b Maintenance
Instructions, Chapter 2)
18 Fuel filler cap (
b 22)
19 Brake fluid reservoir for front
brake (
b 29, 33)
OEOptional equipment
20Type plate/vehicle identifi-
cation number
21 Primary spark plug, right
22 Secondary spark plug, right
23 Brake fluid reservoir for rear
brake (
b 30, 34)
24 Helmet/seat lock (
b 13)
( ) Figure in brackets
bpage number with explanation
General view, right side
10r28FUNbkg1.book Seite 5 Dienstag, 24. Januar 2006 9:31 09

2
19
2
Safety check
Checklist
Use the safety checklist –
before every journey
Please perform the safety
check accurately. If your motor-
cycle needs any routine mainte-
nance, you can then attend to it
before the journey starts
(
b Maintenance Instructions),
or, for example have it carried
out by your authorised BMW
motorcycle dealer.
This is to ensure that your
motorcycle corresponds with
road-vehicle use and safety
laws.
Your vehicle must be in perfect
technical order: this is a basic
prerequisite for your safety and
the safety of other road users.
For this reason, check the
details in the following sections
before you start the journey:
– Engine oil level
–Fuel level
– Positions of the handlebar- lever fittings
– Brake fluid level
– Clutch fluid level
–Brakes – Warning lights and telltale
lights
–Lights
– Shock-absorber setting and spring preload
– Condition of wheels and tyres, tread depth and tyre
pressures
– Load, gross weight
– Check at regular intervals as described in the following
sections
(each time you stop for refuel-
ling):
– Engine oil level (every second or third time
you stop for refuelling):
– Brake pads
If you encounter any problems
or difficulties, it is always best to
contact your authorised BMW
Motorrad dealer.
He will provide the necessary
advice and assistance.
10r28FUNbkg1.book Seite 19 Dienstag, 24. Januar 2006 9:31 09

22
28
Safety check
Brake system - without BMW Integral ABS
Checking brake fluid levelGradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.
d Warning:
If brake fluid level in the fluid
reservoirs for the front or rear
brakes has dropped below
the MIN mark (
b 29, 30), have
the brake system checked
without delay by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
Changing brake fluid
d Warning:
Brake fluid is subject to
severe thermal loads and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly
(see the Maintenance Instruc-
tions
b Chapter 1) by a spe-
cialist workshop, preferably
an authorised BMW
motorcycle dealer.
10r28FUNbkg1.book Seite 28 Dienstag, 24. Januar 2006 9:31 09

2
29
2
Safety check
MIN
Checking front brake fluid
level
d Warning:
Never permit the brake fluid
level to drop below the mini-
mum level (MIN mark)
• Hold the motorcycle upright or lift it on to the main stand
OE
– Make sure the ground is level and firm
OE Optional extra
• Turn the handlebars fully to the left
• Check brake fluid level in sight glass
MIN Minimum level
(top of marking ring)
L Note:
Gradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.
Brake system - without BMW Integral ABS
10r28FUNbkg1.book Seite 29 Dienstag, 24. Januar 2006 9:31 09

22
30
Safety check
MAX
MIN
Brake system - without BMW Integral ABS
Checking rear brake fluid
level
d Warning:
Never permit the brake fluid
level to drop below the MIN
mark on the brake fluid reser-
voir
• Hold the motorcycle upright or lift it on to the main stand
OE
– Make sure the ground is
level and firm • Check the brake fluid level
MAX Maximum level
MIN Minimum level
L Note:
Gradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.
OE Optional extra
10r28FUNbkg1.book Seite 30 Dienstag, 24. Januar 2006 9:31 09

2
31
2
Safety check
Brake system - with BMW Integral ABSOE
Checking brake fluid level
d Warning:
On a motorcycle equipped
with BMW Integral ABS, the
brake fluid level in the reser-
voir does NOT drop as the
brake pads wear (b 33, 34).
d Warning:
Have the brake system
checked immediately by a
specialist workshop, prefera-
bly an authorised BMW mo-
torcycle dealer, if the brake
fluid level in the reservoir of
the brake system drops below
the MIN mark (b 33, 34).
OE Optional extra
Changing brake fluid
d Warning:
Brake fluid is subject to
severe thermal loads and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly (
b
Maintenance Instructions,
Chapter 2) by a specialist
workshop, preferably an
authorised BMW motorcycle
dealer.
10r28FUNbkg1.book Seite 31 Dienstag, 24. Januar 2006 9:31 09

2
33
2
Safety check
MIN
Brake system - with BMW Integral ABSOE
Checking front brake fluid
level
d Warning:
Never permit the brake fluid
level to drop below the mini-
mum level (MIN mark)
• Hold the motorcycle upright or lift it on to the main stand
OE
– Make sure the ground is level and firm
OE Optional extra
• Turn the handlebars fully to the left
• Check bake fluid level in sight glass
MIN Minimum level
(top of marking ring)
L Note:
The brake fluid level in the
brake fluid reservoir remains
constant despite wear of the
brake pads.
10r28FUNbkg1.book Seite 33 Dienstag, 24. Januar 2006 9:31 09

22
34
Safety check
Checking rear brake fluid
level
d Warning:
Never permit the brake fluid
level to drop below the MIN
mark on the brake fluid reser-
voir
OE Optional extra
• Hold the motorcycle upright or lift it on to the main standOE
– Make sure the ground is level and firm
• Check the brake fluid level MIN Minimum level
L Note:
The brake fluid level in the
brake fluid reservoir remains
constant despite wear of the
brake pads.
MIN
Brake system - with BMW Integral ABSOE
10r28FUNbkg1.book Seite 34 Dienstag, 24. Januar 2006 9:31 09