2002 Acura RL 3.5 Owner's Manual

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
Toerasethecodesstoredinallthree
buttons, press and hold the two
outside buttons until the red light
begins to f lash, then release the
buttons.
Youshoulderaseallthreecodes
bef ore selling the car.
Totrainanalreadyprogrammed
HomeLink button to operate a new
device:
Select the HomeLink button you
want to train.
Press and hold the HomeLink
button until the red light begins to
f lash slowly (approximately 20
seconds).
While continuing to hold the
HomeLink button, place the
remotecontrolforthedevice2to
5inchesfromHomeLink.
Press and hold the button on the
remote control. Hold both buttons
until the red light begins to f lash
rapidly. Release both buttons. HomeLink
should now be trained to operate
the device.
1.
3. 2.
4. 5.
Erasing Codes
Retraining a Button
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures166
01/09/28 19:51:42 31SZ3660_169

The OnStarsystem in your vehicle
gives you immediate access to a wide
range of services and inf ormation
with the touch of a button. An
OnStar advisor is available 24 hours
a day, 7 days a week.
The basic Saf ety & Security Plan
provides: Press this button to contact an
OnStar advisor. You will hear a
chime, f ollowed by the
announcement, ‘‘Connecting to
OnStar.’’ The connection should take
20 to 30 seconds. The advisor will
assist you with any of the services
included in your plan.
Depending on what service you
request, you may need to give your
Personal Identification Number
(PIN) to the advisor. Your PIN is a
number you make up and provide
when you establish your OnStar
service.
If cellular telephone service is not
available in the area you are driving
in, you will hear a f ast busy signal.
The system will retry the connection
several times bef ore returning to the
ready mode.
Roadside Assistance.
Emergency Services.
Automatic Notif ication of Airbag
Deployment.
Accident Assist.
Remote Door Locking/Unlocking.
Stolen Vehicle Tracking.
Misplaced Vehicle Assistance.
The Premium Service Plan provides
these additional f eatures: Route Support.
Ride Assist.
Inf ormation and Convenience
Services.
Concierge Services. The OnStar control buttons and
indicator are located in the base of
the rear view mirror.
CONT INUED
Comf ort and Convenience Feat ures
OnStar System
OnStar Services Button
OnStar Control Panel
167
O On nS
St taar r B
BU UT TT
TO
ON N S
SY
YSSTTE
EM
M
S
ST TA
A T
TU
US S L
LIIGGH HT
T
E
E M
M E
ER
RG GE EN
NC CYY
B
BU UT TT
TO
ON N
C
CA
A L
LLL
A
A N
NS SWWE ER
R/ /E
E N
ND D
B
BU UT TT
TO
ON N
01/09/28 19:52:02 31SZ3660_170

µµ
µ
µ
To cancel these retries, press the
Call Answer/End (DOT) button.
A microphone is located in the base
of therearviewmirrorsoyoucan
speak to the advisor without taking
your hands of f the steering wheel or
diverting your attention f rom the
road. The OnStar advisor’s voice
comes f rom the audio system’s
speakers. Use the volume control on
the audio system or on the steering
wheel to adjust the volume.
Press this button to contact an
OnStar advisor only if you have an
emergency situation. You will hear a
tone, f ollowed by the announcement,
‘‘Connecting to OnStar Emergency.’’
Your call is given highest priority. The advisor will ask about the nature
of the emergency, locate your
vehicle, and notif y the appropriate
emergency service agencies.
Press this ‘‘DOT’’ button to end a call
to the OnStar advisor, or to cancel
the call if you should press one of
the other buttons accidentally. If the
OnStar center should call you, press
this button to answer the call.
This button is also used to initiate
the Personal Calling and Virtual
Advisor services, if you have
subscribed.This light shows you the status of
the system.
The system is ready
for use.
Acallisin
progress.
There is a problem in
the system. Press the OnStar button
to contact an advisor. If the call
connects, the advisor will assist you
with verif ying the system’s operation.
If you are not able to contact an
advisor, take your vehicle to an
Acura dealer to have the system
diagnosed.
There is a problem
in the system with a call in progress.
If you press this button accidentally,
do not cancel the call. Wait until the
OnStar advisor answers, then explain
your mistake.
Emergency Button Call Answer/End ButtonSolid Green
Blinking Green
Solid Red
Blinking Red System Status L ight
OnStar System
Comf ort and Convenience Feat ures168
01/09/28 19:52:17 31SZ3660_171

µ
µ µ
µ
µ µ
µ
The OnStar system uses the Global
Positioning System (GPS) to locate
your vehicle whenever you place a
call. This allows the advisor to
quickly contact the nearest services
without requiring you to provide
detailed directions.
Contact
the OnStar advisor if you need
assistance with a problem (f lat tire,
out of f uel, etc.) while traveling. The
advisor will contact an appropriate
agency to come and assist you.
Contact an
OnStar advisor if you have an
emergency situation. The advisor
will contact the nearest emergency
services provider (ambulance, f ire
department, etc.) and advise them of
your situation. If you are ever in an
accident that causes the airbags to
deploy, the OnStar system
automatically places a call (provided
the OnStar system and your vehicle’s
electrical system are still intact). The
advisor will attempt to speak to you
to evaluate the situation, and contact
the nearest emergency services
provider.
The OnStar
advisor can help you if you are ever
in a minor accident by giving you a
list of inf ormation you should collect
at the accident scene.Complete,
detailed inf ormation will make it
easier to complete accident reports
and insurance claims.
By sending a signal to your
vehicle, the advisor can lock or
unlock your vehicle’s doors. This is
helpfulif youareawayfromyour vehicle and realize you f orgot to lock
the doors, or if you have locked the
keys in your vehicle. To get OnStar’s
assistance, call (888) 4-ONSTAR
(466-7827).
Using
GPS, OnStar can locate your vehicle
almost anywhere. If your vehicle is
ever stolen, contact OnStar at (888)
4-ONSTAR. The advisor will put you
in contact with the proper authorities,
and assist them with locating your
vehicle.
If you are unable to locate your
vehicleinalargeparkinglotor
parking structure, contact OnStar at
(888) 4-ONSTAR. The advisor will
remotely activate the exterior lights
and the horn, allowing you to locate
your vehicle.
Comf ort and Convenience Feat ures
OnStar System
Saf ety and Security Plan Features
Roadside Assistance
Emergency Services A utomatic Notif ication of A irbag
Deployment
A ccident A ssist
Remote Door L ocking/Unlocking
Stolen Vehicle T racking
Misplaced Vehicle Assistance
169
01/09/28 19:52:28 31SZ3660_172

µ
µ
µ µ
µ
The Premium Service Plan provides
these additional f eatures.
The OnStar
advisor can give you verbal
directions f rom your current location
to a desired destination.
If you need a ride
(taxi, limousine service, etc.) the
OnStar advisor can make the
arrangements f or you. Use the
OnStar button or call (888)
4-ONSTAR.
The OnStar advisor can
give you inf ormation on nearby
hotels, restaurants, ATMs, hospitals,
gas stations, and many other
services in any area you are traveling
in. The advisor can also help you
with hotel or restaurant reservations. The OnStar
advisor can assist you with
purchasing theater tickets, airline
tickets, rental car reservations f or a
vacation, and just about any other
purchase you desire.
The OnStar Personal Calling plan is
an extra-cost option that gives you
the ability to use your vehicle’s
OnStar system as a hands-f ree
cellular telephone.
To sign up f or Personal Calling,
press the OnStar button in your
vehicle, and notify the advisor that
you’d like to sign up. The advisor will
get all the information needed to set
up your account, and provide you
with your new cellular telephone
number.
You will need to provide a credit card
number, and prepurchase ‘‘units’’ or
minutes of air time (one unit equals one minute).
You
must use voice commands to give
the OnStar system your calling
inf ormation. To make a phone call:
Press the Call Answer/End
(DOT) Button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Dial.’’
OnStar will respond with ‘‘Number
Please.’’
Say the f irst digit of the number.
OnStar will repeat that digit.
Always wait f or OnStar to conf irm
the digit bef ore going to the next
digit.
Say the second digit of the number.
OnStar will repeat that digit.
Premium Service Plan Features
Route Support
Ride Assist
Inf ormation and Convenience
Services
Concierge Services
Personal Calling
Placing a Telephone Call
OnStar System
Comf ort and Convenience Feat ures170
01/09/28 19:52:45 31SZ3660_173

µµ
µ µ
Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Dial.’’
If the system has difficulty
understanding a voice command, it
canrespondwith:
‘‘Pardon’’ The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’ The system
missed the command because it was
not yet ready f or it, or there was too
much background noise. Repeat the
command after a short pause.
With
voice f eedback of f , the system will
respond with a tone rather than
‘‘Ready,’’ or repeating each number
you say. Other responses will still be
by voice. To turn voice f eedback on
or of f :
Press the DOT button.
OnStar will respond with ‘‘Dialing’’
andthenrepeatthecomplete
telephone number. It will then
place the telephone call.
When you have f inished your
conversation, press the DOT
button again to hang up.
If you make a mistake speaking a
digit of the phone number, or the
system responds with the wrong
digit, say ‘‘Clear.’’ This will cause the
system to erase the last digit.
If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Voice Feedback.’’OnStar will respond with ‘‘Voice
feedback On/Off.’’
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the DOT button to answer the
call. When you have completed the
call, press the DOT button again to
hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a nametag. When you want
to place a telephone call, you can
recall the number by giving the
system the nametag.
CONT INUED
Comf ort and Convenience Feat ures
OnStar System
Voice Feedback On/Of f Incoming T elephone Calls
Using Nametags
171
01/09/28 19:52:59 31SZ3660_174

µµ
»¼
»¼ µ
To store a
telephone number and its nametag in
the system:
Press the DOT button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Store.’’
OnStar will respond with ‘‘Number
Please.’’
Say the f irst digit of the number.
OnStar will repeat that digit.
Say the second digit of the number.
OnStar will repeat that digit.
Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Store’’ again.
OnStar will respond with
‘‘Nametag Please.’’ Say the name that you want
assigned to that telephone number.
OnStar will respond with ‘‘Again.’’
Repeat the nametag.
OnStar will respond with ‘‘Once
more.’’
Repeat the nametag.
To
place a telephone call using a
nametag: OnStar will respond with ‘‘Storing
nametag .’’
Press the DOT button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Call.’’
OnStar will respond with
‘‘Nametag Please.’’
Say the nametag f or the number
you want to call.
OnStar will respond with ‘‘Calling nametag ,’’ then place the
telephone call. If you have forgotten what nametags
you have stored, the system will read
them to you. Press the DOT button.
When the system responds with
‘‘Ready,’’ say ‘‘Directory.’’
To delete a
nametag and telephone number f rom
memory:
Press the DOT button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Delete.’’
OnStar will respond with
‘‘Nametag Please.’’
Storing a Nametag
Placing a Telephone CallDeleting a Nametag
OnStar System
Comf ort and Convenience Feat ures172
01/09/28 19:53:24 31SZ3660_175

»¼
»¼µ
»¼
Say the nametag f or the number
you want to delete.
OnStar will respond with ‘‘Delete
nametag , Yes or No.’’
Say ‘‘Yes.’’
OnStar will respond with ‘‘Deleting nametag .’’
To redial
the last telephone number you
called:
Press the DOT button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Redial.’’
OnStar will respond with
‘‘Redialing,’’ then place the
telephone call.
By giving the system a security code
that you make up, you can lock out
the Personal Calling and Virtual
Advisor capabilities of the system so
unauthorized people cannot make
telephone calls. To turn security on or of f :
Press the DOT button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Security.’’
OnStar will respond with ‘‘Enter
f our-digit security code.’’
Say the f irst digit of the code.
OnStar will repeat that digit.
OnStar will repeat that digit. Say the second digit of the code.
Say the third digit of the code.
OnStar will repeat that digit.
Say the f ourth digit of the code.
OnStar will respond with ‘‘Security
code number is now ON/OFF.’’ You must prepurchase units
(minutes) of cellular air time. The
OnStar system tracks how many
units you have remaining.
To f ind out how many units you have
remaining:
Press the DOT button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Units.’’
If you f orget the security code
entered, or someone else enters a
security code unknown to you, you
must contact an OnStar advisor to
reset the code. Press the OnStar
button, or call (888) 4-ONSTAR.
CONT INUED
Comf ort and Convenience Feat ures
OnStar System
Redialing a Number
Security Code K eeping T rack of Units
173
01/09/28 19:53:49 31SZ3660_176