2001 YAMAHA YFM600FWA engine

7-7
Riding your machine requires skills acquired
through practice over a period of time.
Take the time to learn the basic techniques
well before attempting more difficult maneu-
vers.
Not recommended for children under 16 years
of age.
WARNING
A child under 16 should never operate an ATV
with engine size greater than 90cc. Use by
children of ATVs that are not recommended
for their age can lead to severe injury or death
of the child.

7-17
1. Locknut 2. Adjusting bolt a. 12 mm
1. Contre-écrou 2. Boulon de réglage
1. Contratuerca 2. Perno de ajuste
Speed limiter
For riders less experienced with this model,
this model is equipped with a speed limiter in
the throttle lever housing. The speed limiter
keeps the throttle from fully opening, even
when the throttle lever is pushed to the maxi-
mum. Screwing in the adjuster limits the max-
imum engine power available and decreases
the maximum speed of the ATV. Turning the
screw in decreases top speed and turning it out
increases top speed.
Loading and accessories
Use extra caution when riding the machine
with additional loads, such as accessories or
cargo. The machine’s handling may be ad-
versely affected. Reduce your speed when
adding additional loads.

7-35
Select a large, flat area off-road to become fa-
miliar with your ATV. Make sure that this area
is free of obstacles and other riders. You
should practice control of the throttle, brakes,
shifting procedures, and turning techniques in
this area before trying more difficult terrain. Al-
ways avoid riding on paved surfaces: the ATV
is designed for off-road use only, and handling
maneuvers are more difficult to perform on
pavement.
Set the parking brake and follow the instruc-
tion on page 6-3 to start the engine. Once it has
warmed up you are ready to begin riding your
ATV. As you get on the ATV, be sure not to ac-
cidentally move the shift pedal. Remember
that the engine and exhaust pipe will be hot
when riding and afterwards; do not allow skin
or clothing to come in contact with these com-
ponents.

7-37
With the engine idling, shift the drive select le-
ver into low or high. Then release the parking
brake. Apply the throttle slowly and smoothly.
The centrifugal clutch will engage and you will
start to accelerate. If the throttle is applied too
abruptly, the front wheels may lift off the
ground resulting in a loss of directional con-
trol. Avoid higher speeds until you are thor-
oughly familiar with the operation of your ATV.
When slowing down or stopping, release the
throttle and apply the brakes smoothly and
evenly. Improper use of the brakes can cause
the tires to lose traction, reducing control and
increasing the possibility of an accident.
CAUTION:
Do not shift from low to high or vice versa
without coming to a complete stop. Damage
to the engine or drive train may occur.

7-55
RIDING DOWNHILL
When riding your ATV downhill, shift your
weight as far to the rear and uphill side of the
ATV as possible. Move back on the seat and sit
with your arms straight. Engine compression
will do most of the braking for you. For maxi-
mum engine compression braking effect, se-
lect low range and change to 4WD before
beginning to descend the hill. Improper brak-
ing may cause a loss of traction.
Use caution while descending a hill with loose
or slippery surfaces. Braking ability and trac-
tion may be adversely affected by these surfac-
es. Improper braking may also cause a loss of
traction.
When this ATV is in 4WD, all wheels (front and
rear) are interconnected by the drive train. This
means that applying either the front brake or
the rear brake will brake all wheels. When de-
scending hills, using either brake lever or the
brake pedal will brake the wheels on the down-
hill side. Avoid sudden application of either the
front or rear brake because the wheels on the
uphill side could come off the ground. Apply
both the front and rear brakes gradually.

8-1
EBU00516
PERIODIC MAINTENANCE AND
ADJUSTMENT
Periodic inspection, adjustment and lubrica-
tion will keep your machine in the safest and
most efficient condition possible. Safety is an
obligation of the machine owner. The most im-
portant points of machine inspection, adjust-
ment and lubrication are explained on the
following pages.
WARNING
Never service an engine while it is running.
Moving parts can catch clothing or parts of the
body, causing injury. Electrical components
can cause shocks or can start fires. Turn off the
engine when performing maintenance unless
otherwise specified. Have a Yamaha dealer
perform service if you are not familiar with
machine service.

8-7
EBU00262
PERIODIC MAINTENANCE/LUBRICATION
ITEM ROUTINEINITIAL EVERY
1
month3
months6
months6
months1
year
Valves*• Check valve clearance.
• Adjust if necessary.
Spark plug• Check condition.
• Adjust gap and clean.
• Replace if necessary.
Air filter• Clean.
• Replace if necessary.Every 20~40 hours
(More often in wet or dusty areas.)
Carburetor*• Check idle speed/starter operation.
• Adjust if necessary.
Crankcase breather
system*• Check breather hose for cracks or damage.
• Replace if necessary.
Exhaust system*• Check for leakage.
• Retighten if necessary.
• Replace gasket(s) if necessary.
Fuel line*• Check fuel hose for cracks or damage.
• Replace if necessary.
Engine oil• Replace (Warm engine before draining).
Engine oil filter• Replace.
Engine oil strainer*• Clean.
Final gear oil• Check oil level/oil leakage.
• Replace every 12 months.
Differential gear oil
Front brake*• Check operation/fluid leakage/see NOTE page 8-8.
• Correct if necessary.
Rear brake*• Check operation.
• Adjust if necessary.
V-belt*• Check operation.
• Check for cracks or damage every 12 months or
2,400 km whichever comes first.

8-15
EBU00537
Engine oil
1. Engine oil level measurement
a. Place the machine on a level place.
b. Warm up the engine for several minutes
and stop it.
c. With the engine stopped, check the oil lev-
el through the level window located at the
lower part of the left side crankcase cover.
NOTE:
Wait a few minutes until the oil level settles be-
fore checking.
d. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, fill engine with sufficient oil to raise it
to the specified level.
CAUTION:
Be sure no foreign material enters the crank-
case.
1. Level window 2. Minimum level mark
3. Maximum level mark
1. Hublot de contrôle du niveau 2. Repère de niveau minimum
3. Repère de niveau maximum
1. Ventanilla de nivel de aceite 2. Marca de nivel mínimo
3. Marca de nivel máximo