2001 TOYOTA HIGHLANDER engine oil

service interval oil reset night vision manual radio set wheel CD changer

Page 464 of 2572

TOYOTA HIGHLANDER 2001 Service Repair Manual 2005 HIGHLANDER (EWD592U)
149
With the ignition SW turned on, the current flows to TERMINAL (A) 5 of the body ECU through IG1 fuse.
Voltage is applied at all times to TERMINAL (A) 7 of the body ECU th

2005 HIGHLANDER (EWD592U)
149
With the ignition SW turned on, the current flows to TERMINAL (A) 5 of the body ECU through IG1 fuse.
Voltage is applied at all times to TERMINAL (A) 7 of the body ECU through the TAILLIGHT relay. Coil side, and to
TERMINAL (C) 3 through the HEAD LAMP relay coil side (w/o daytime running light) or through the DRL NO.2 relay (w/
daytime running light).
1. Normal Lighting Operation

With the light control SW turned to TAIL position, a signal is input into TERMINAL (B) 18 of the body ECU. Due to this signal,
the current flowing to TERMINAL (A) 7 of the body ECU flows to TERMINAL (B) 18 to TERMINAL 14 of the light control SW
to TERMINAL 16 to GROUND, and TAILLIGHT relay causes taillights to turn on.

With the light control SW turned to HEAD position, a signal is input into TERMINALS (B) 17 and (B) 18 of the body ECU. Due
to this signal, the current flowing to TERMINAL (C) 3 of the body ECU flows to TERMINAL (B) 17 to TERMINAL 13 of the
light control SW to TERMINAL 16 to GROUND in the headlight circuit, and causes TAILLIGHT and HEAD LAMP (w/o
daytime running light) or DRL NO.2 relay (w/ daytime running light) to turn the lights on. The taillight circuit is same as above.
2. Light Auto Turn Off Operation
With light on and ignition SW turned off (Input signal goes to TERMINAL (A) 5 of the body ECU), when the driver's door is
opened (Input signal goes to TERMINAL (C) 11 of the body ECU), the ECU operates and the current is cut off which flows
from TERMINAL (A) 7 of the body ECU to TERMINAL (B) 18 in taillight circuit and from TERMINAL (C) 3 to TERMINAL (B)
17 in headlight circuit.
As a result, all lights are turned off automatically.
B9 (A), B10 (B), B12 (D) Body ECU
(D) 9-Ground : Always approx. 12 volts
(A) 5-Ground : Approx. 12 volts with the ignition SW at ON position
(B)17-Ground : Continuity with the light control SW at HEAD position
K4 Unlock Warning SW
2-1 : Closed with the ignition key in the cylinder
: PARTS LOCATION
CodeSee PageCodeSee PageCodeSee Page
B9A42C1342J643
B10B42D744K443
B11C42F738 (3MZ-FE)
B12D42F740 (2AZ-FE)
: RELAY BLOCKS
CodeSee PageRelay Blocks (Relay Block Location)
323Engine Room R/B No.3 (Engine Compartment Rear Left)
System Outline
Service Hints