2001 Peugeot Partner VU stop start

3
2
1
0
4
5
6
Front wipers 0Stop
1 Intermittent wipe
2 Normal wipe
3 Rapid wipe
4 Single stroke wipe
Press downwards Front windscreen washPull the stalk towards you. This starts a timed wiping operation. Note : - Position 1: the intermittent wipe
will automatically adjust according to the vehicle speed.
- Positions 1, 2 and 3: when statio-
nary, the wipe speed will automati-cally reduce.
- The engaging of reverse gear, when the front wiper is operating,makes the rear wiper operate. 5 Rear screen wiper For intermittent wipe: twist the ring forwards. 6 Rear screen wash
For screen wash and wipe: turn the ring for-wards.
On release: approximately fourwipes, then it stops. Electric demister* : Electric demister for rear screen or rear view mirrors or both simulta-
neously, according to specifica-
tion. The light indicating operation
switches off automatically afterapproximately 12 minutes to pre-vent excessive power consump-tion. Press once to stop thedemisting function. Press onceagain to restart for 12 minutes. The electric demister will only ope- rate when the engine is running.
* According to specification or country.
39I-17VISIBILITY

These warning lights are tested with the key in the ignition on position : M
64III-1STEERING LOCK-IGNITION-STARTER
¥ S : Steering lock
To release the steering lock, turn the steering wheel slightly, without forcing it, at the
same time as turning the key.
¥ A : Accessories Allows operation of some electrical accessories (radio, electric windows, map rea-
ders, etc.). The battery charge light comes on. ¥ M : Ignition
The following warning lamps * should illuminate : ABS, preheating (Diesel), battery
charge, STOP, oil pressure, handbrake and brake fluid level, engine autodiagnosis,airbags, door closing. If any of these warning lamps do not illuminate, there is a malfunction. ¥ D : Starter Release the key as soon as the engine has started. Never operate the key with the
engine running (see ÒSTARTING THE ENGINEÓ).
* According to model or country

Steering lock SWith the key removed and the steering lock engaged, the steering is loc- ked; the lock will engage in a number of positions of the steering wheel.The key can only be removed in the Sposition.
A The steering lock is released (by turning the key to position A, turning the
steering wheel slightly, if necessary).
M Driving position.
D Starting position.
For starting and stopping the engine, see ÒSTARTING THE ENGINEÓ.
65III-1STEERING LOCK-IGNITION-STARTER
WARNING
Never remove the ignition key before the vehicle has come to a complete stop. Never attempt to move the
vehicle without the engine running. If the engine is not running, the vehicleÕs steering and braking systemswill not be power-assisted (there is a risk of the steering lock engaging and the safety features not opera-ting). After parking, remove the ignition key and turn the steering wheel until the steering column locking peg engages.

Check that the gear lever is in neutral.
PETROL ENGINEStarting with the engine cold. Do not press the accelerator pedal. Operate the starter until the engine starts (not more than ten seconds).In very low temperatures, press the clutch pedal when operating the starter to ease starting of the engine. Release
the clutch pedal slowly.
DIESEL ENGINEStarting with engine cold
Turn the ignition key to position M(ignition, preheater) and wait until the preheater warning light goes out. Then
operate the starter until the engine starts. In very low temperatures, press the clutch pedal when operating the starter to ease starting of the engine. Release
the clutch pedal slowly. Note : Do not press the accelerator pedal during starting.
Starting with engine hot
Operate the starter. If the engine fails to start at the first attempt, repeat using the preheater. In all cases, if the engine stops or fails to start at the first attempt, wait a few seconds before operating the starter again. Note : The preheater warning lamp does not come on when the engine is hot.
Recommendation : It is not necessary to warm up the engine before starting off. Wait for the warning lamp to go out and then drive
off slowly, accelerating gently until the engine warms up.
66III-2STARTING THE ENGINE
CAUTION
Do not run the engine in an enclosed or poorly ventilated space.

CD MULTI-CHANGER* Selecting the CD changer
Press the "SRC"b utton until the CD c hang er is selec ted .
Selecting a disc
Press a b utton from Ò1Óto Ò6Ó to selec t the c orresp ond ing d isc .
Selecting a track
Press b utton ÒJÓto selec t the next trac k.
Press b utton ÒKÓto return to the start of the c urrent trac k or to selec t the p revious trac k.
Accelerated play
Press the ÒMANÓb utton.
Keep b utton ÒJÓor ÒKÓ p ressed for forward s or b ac kward s ac c elerated p lay.
Ac c elerated p lay stop s as soon as you release the b utton. Buttons ÒJÓand ÒKÓresume the Ò trac k selec tionÓ func tion when the ÒMANÓb utton is p ressed ag ain.
Shuffle (RAND)
When the CD multi-c hang er is selec ted , keep the ÒSRCÓb utton p ressed for two sec ond s. The trac ks will b e p layed in
rand om seq uenc e. Pressing the ÒSRCÓb utton ag ain for two sec ond s returns you to normal p lay.
*Ac c ord ing to sp ec ific ation
50 II-1
RB1 CAR RADIO

EON system
This c onnec ts stations whic h are p art of the same network. It enab les b road c asting of traffic information or a PTY p ro-
g ramme from a station whic h is p art of the same network as the station to whic h you are listening .
This servic e is availab le when you have selec ted the TA traffic information p rog ramme or the PTY func tion.
COMPACT DISC Selecting the CD as source
After inserting a d isc , with the p rinted surfac e up ward s, the p layer starts automatic ally.
If a d isc is alread y inserted , p ress the "K"b utton.
Ejecting a disc
Press b utton ÒAÓto ejec t the d isc from the p layer.
Selecting a track
Press b utton ÒGÓto selec t the next trac k.
Press b utton ÒHÓto return to the start of the c urrent trac k or to selec t the p revious trac k.
Accelerated play
Press the ÒMANÓb utton.
Keep b utton ÒGÓor ÒHÓ p ressed for forward s or b ac kward s ac c elerated p lay.
Ac c elerated p lay stop s as soon as you release the b utton. Buttons ÒGÓand ÒHÓresume the Ò trac k selec tionÓ func tion when the ÒMANÓb utton is p ressed ag ain.
Shuffle (RDM)
When the CD is selec ted , keep the ÒKÓb utton p ressed for two sec ond s. The trac ks will b e p layed in rand om seq uenc e.
Pressing the ÒKÓb utton ag ain for two sec ond s returns you to normal p lay.
59
II-2 RD1 CAR RADIO

EON system
This c onnec ts stations whic h are p art of the same network. It enab les b road c asting of traffic information or a PTY p ro-
g ramme from a station whic h is p art of the same network as the station to whic h you are listening .
This servic e is availab le when you have selec ted the TA traffic information p rog ramme or the PTY func tion.
COMPACT DISC Selecting the CD as source
After inserting a d isc , with the p rinted surfac e up ward s, the p layer starts automatic ally.
If a d isc is alread y inserted , p ress the "K"b utton.
Ejecting a disc
Press b utton ÒAÓto ejec t the d isc from the p layer.
Selecting a track
Press b utton ÒGÓto selec t the next trac k.
Press b utton ÒHÓto return to the start of the c urrent trac k or to selec t the p revious trac k.
Accelerated play
Press the ÒMANÓb utton.
Keep b utton ÒGÓor ÒHÓ p ressed for forward s or b ac kward s ac c elerated p lay.
Ac c elerated p lay stop s as soon as you release the b utton. Buttons ÒGÓand ÒHÓresume the Ò trac k selec tionÓ func tion when the ÒMANÓb utton is p ressed ag ain.
Shuffle (RDM)
When the CD is selec ted , keep the ÒKÓb utton p ressed for two sec ond s. The trac ks will b e p layed in rand om seq uenc e.
Pressing the ÒKÓb utton ag ain for two sec ond s returns you to normal p lay.
59
II-2 RD1 CAR RADIO

CD MULTI-CHANGER* Selecting the CD multi-changer
Press the ÒLÓb utton.
Selecting a disc
Press a b utton from Ò1Óto Ò6Ó to selec t the c orresp ond ing d isc .
Selecting a track
Press b utton ÒGÓto selec t the next trac k.
Press b utton ÒHÓto return to the start of the c urrent trac k or to selec t the p revious trac k.
Accelerated play
Press the ÒMANÓb utton.
Keep b utton ÒGÓor ÒHÓ p ressed for forward s or b ac kward s ac c elerated p lay.
Ac c elerated p lay stop s as soon as you release the b utton. Buttons ÒGÓand ÒHÓresume the Ò trac k selec tionÓ func tion when the ÒMANÓb utton is p ressed ag ain.
Shuffle (RDM)
When the CD multi-c hang er is selec ted , keep the ÒLÓb utton p ressed for two sec ond s. The trac ks will b e p layed in ran-
d om seq uenc e. Pressing the ÒLÓb utton ag ain for two sec ond s returns you to normal p lay.
*Ac c ord ing to sp ec ific ation
60 II-2
RD1 CAR RADIO