2001 Peugeot Partner VU reset

Display :¥ Digital clock.
¥ Maintenance indicator.
¥ Engine oil level indicator (Diesel).
¥ Total mileage recorder.
26I-14INSTRUMENT PANEL*
Tachometer
Coolant temperature gauge Fuel gauge
Display control : ¥ Total mileage recorder.
¥ Trip mileage recorder
¥ Resetting the trip mileage recorder to zero.
Dashboard lighting rheostat see ÒI-14Ó Changing the time see ÒI-14Ó
* According to model or country

1
11
Maintenance intervals If your vehicle is used in particular- ly harsh conditions, it is necessaryto select the maintenance sche-dules for arduous conditions (seethe Maintenance Guide) whichconsist of more frequent services.Note : if the maximum time bet-
ween two oil changes is reachedbefore the mileage is up, the span-ner symbol lights. To change the maintenanceintervals :
- Switch off the ignition. - Press and hold down button
1.
- Switch on the ignition
- The distance remaining until the next service flashes.
- Release the button immediately.
- The maintenance interval is dis- played.
- Pressing button 1briefly allows
the maintenance intervals to be alternated - When the desired maintenance
interval is displayed, press but-ton 1for ten seconds to validate
(the selected maintenance inter-val will flash for ten seconds).
Release the button to validatewhen the display stops flashing. Resetting the maintenance indi- cator to zero
Your dealer will perform this ope-
ration after each service. However,if you intend to service the vehicleyourself, the procedure for reset-ting the maintenance indicator isas follows:
- Switch off the ignition.- Press and hold down button 1.
- Switch on the ignition.
- The distance remaining until the next service flashes.
- Holdbutton 1down for ten
seconds.
- The display will read Ò=0Óand
the spanner will disappear.
29I-14INSTRUMENT PANEL*
* According to model or country.

AAA
Press button Ato alternate the display between the total mileage recorder
and the trip mileage recorder
31I-14INSTRUMENT PANEL*
Total mileage recorder & Trip mileage recorder
* According to model or country
Resetting the trip mileage recorder to zero Press and hold down button
A, the
display will flash three times and read 0.

AAA
Press button Ato alternate the display between the total mileage recorder
and the trip mileage recorder
31I-14INSTRUMENT PANEL*
Total mileage recorder & Trip mileage recorder
* According to model or country
Resetting the trip mileage recorder to zero Press and hold down button
A, the
display will flash three times and read 0.

1
11
Maintenance intervals If your vehicle is used in particular- ly harsh conditions, it is necessaryto select the maintenance sche-dules for arduous conditions (seethe Maintenance Guide) whichconsist of more frequent services.Note : if the maximum time bet-
ween two oil changes is reachedbefore the mileage is up, the span-ner symbol lights. To change the maintenanceintervals :
- Switch off the ignition. - Press and hold down button
1.
- Switch on the ignition
- The distance remaining until the next service flashes.
- Release the button immediately.
- The maintenance interval is dis- played.
- Pressing button 1briefly allows
the maintenance intervals to be alternated - When the desired maintenance
interval is displayed, press but-ton 1for ten seconds to validate
(the selected maintenance inter-val will flash for ten seconds).
Release the button to validatewhen the display stops flashing. Resetting the maintenance indi- cator to zero
Your dealer will perform this ope-
ration after each service. However,if you intend to service the vehicleyourself, the procedure for reset-ting the maintenance indicator isas follows:
- Switch off the ignition.- Press and hold down button 1.
- Switch on the ignition.
- The distance remaining until the next service flashes.
- Holdbutton 1down for ten
seconds.
- The display will read Ò=0Óand
the spanner will disappear.
29I-14INSTRUMENT PANEL*
* According to model or country.

Refitting
1 - Fit the wheel onto the hub, making sure that it is correctly positioned.
2 - Screw in one of the wheel bolts without fully tightening it. Clip the wheel embellisher onto the bolt, then tightenthe three other bolts.
3 - Lower the jack and remove it.4 - Fully tighten the wheel bolts using the wheelbrace.5 - Refit the repaired wheel as soon as possible6 - Reset the tyre pressure of the repaired wheel (see ÒTYRESÓ) and have the balance checked. Replacing the spare wheel in the carrier Place the chock back in the wheel.
Slide the spare wheel back into its carrier.Lift the carrier and position the hook so that it is aligned with the tightening nut.Retighten the nut from inside the vehicle.Store the wheelbrace, and then the jack. Note The wheel bolts are specific to each wheel type. When a wheel is changed, check with an approved dealer that the
bolts are suitable for the new wheel (See ÒUSING THE SPARE WHEELÓ).
104 VI-5CHANGING A WHEEL