Check that the gear lever is in neutral.
PETROL ENGINEStarting with the engine cold. Do not press the accelerator pedal. Operate the starter until the engine starts (not more than ten seconds).In very low temperatures, press the clutch pedal when operating the starter to ease starting of the engine. Release
the clutch pedal slowly.
DIESEL ENGINEStarting with engine cold
Turn the ignition key to position M(ignition, preheater) and wait until the preheater warning light goes out. Then
operate the starter until the engine starts. In very low temperatures, press the clutch pedal when operating the starter to ease starting of the engine. Release
the clutch pedal slowly. Note : Do not press the accelerator pedal during starting.
Starting with engine hot
Operate the starter. If the engine fails to start at the first attempt, repeat using the preheater. In all cases, if the engine stops or fails to start at the first attempt, wait a few seconds before operating the starter again. Note : The preheater warning lamp does not come on when the engine is hot.
Recommendation : It is not necessary to warm up the engine before starting off. Wait for the warning lamp to go out and then drive
off slowly, accelerating gently until the engine warms up.
66III-2STARTING THE ENGINE
CAUTION
Do not run the engine in an enclosed or poorly ventilated space.
