FRONT SEAT
SE-7
C
D
E
F
G
H
J
K
L
MA
B
SE
FRONT SEATPFP:87000
Component Parts DrawingEIS000NN
SIIA0242E
1. Side air bag module 2. Seat back frame 3. Seat back trim
4. Headrest holder (free) 5. Headrest holder (locked) 6. Headrest
7. Seat back pad 8. Seat cushion frame 9. Seat cushion heater unit
10. Seat cushion pad 11. Seat back heater unit 12. Seat cushion trim
13. Outer slide cover (LH) 14. Reclining lever knob 15. Lifter dial
16. Outer seat cushion finisher (LH) 17. Front seat adjuster 18. Rear inner slide cover (LH)
19. Inner seat cushion finisher (LH) 20. Seat belt buckle 21. Front inner slide cover (LH)
FRONT SEAT
SE-9
C
D
E
F
G
H
J
K
L
MA
B
SE
4. Pick up and push up the headrest holder tab to remove.
NOTE:
Before installing the headrest holder, check its front, rear, right
and left orientation for correct installation.
5. After removing seat back trim & pad, remove hog rings to sepa-
rate pad and trim.
Removal of Seat Back Assembly
●To remove seat back assembly, follow steps 1 - 2. After that, remove side air bag connector and bolts.
NOTE:
When assembling the seat back frame, make sure that the reclining device are locked on both sides, and
be sure to temporarily tighten the bolts, then tighten them finally.
SEAT BACK TRIM [WITHOUT SIDE AIR BAG (EXCEPT GENUINE LEATHER SEAT ) ]
1. Disengage retainers in the lower part at the back of seat back.
2. Pull off seat back trim.
3. Pick up and push up the headrest holder tab to remove.
NOTE:
Before installing the headrest holder, check its front, rear, right
and left orientation for correct installation.
4. Remove seat back trim.
PIIA0167E
PIIA0547E
SIIA0248E
PIIA0167E
REAR SEAT
SE-11
C
D
E
F
G
H
J
K
L
MA
B
SE
REAR SEATPFP:88300
Component Parts DrawingEIS000NR
STANDARD SEAT
SIIA0257E
1. Rear seat back board 2. Inner hinge cover 3. Rear seat lock
4. Rear seat back frame 5. Seat back pad 6. Rear seat back lock knob
7. Rear seat lock knob finisher 8. Headrest holder (free) 9. Headrest holder (locked)
10. Headrest 11. Seat back trim 12. Rear seat lock protector
13. Rear backside bracket 14. Rear seat cushion trim 15. Rear seat cushion pad
16. Rear seat cushion stay 17. Cushion lock 18. Side hinge cover
SE-12
REAR SEAT
SEAT WITH ARMREST
SIIA0258E
1. Rear seat back board 2. Inner hinge cover 3. Rear seat backboard finisher
4. Rear seat back knob 5. Rear seat back knob finisher 6. Headrest
7. Headrest holder (free) 8. Headrest holder (locked) 9. Seat back pad
10. Rear seat lock 11. Rear seat back frame 12. Rear seat belt (center)
13. Armrest bracket cover 14. Armrest 15. Armrest lid board
16. Rear seat back trim 17. Seat belt escutcheon 18. Rear back side bracket
19. Rear seat lock protector 20. Side hinge cover 21. Armrest bracket cover
22. Rear seat cushion trim 23. Rear seat cushion stay 24. Rear seat cushion pad
25. Cushion lock
