2001 Lexus ES300 light

[x] Cancel search: light

Page 331 of 504

Lexus ES300 2001  Owners Manuals (in English) STARTING AND DRIVING
314
Drum±in±disc type parking brake system
Your vehicle has a drum±in±disc type parking brake
system.  This type of brake system needs
bedding±down of the brake shoes periodi

Page 336 of 504

Lexus ES300 2001  Owners Manuals (in English) DRIVING TIPS
319
BREAK±IN PERIOD
Drive gently and avoid high speeds.
You need not follow a break±in schedule with your new
Lexus.  But following a few simple tips for the first 1600
km (1000 miles)

Page 337 of 504

Lexus ES300 2001  Owners Manuals (in English) DRIVING TIPS
320
CAUTION
Before driving off, make sure the parking brake is
fully released and that the parking brake reminder
light is off.
 Do not rest your foot on the brake pedal while driving.

Page 348 of 504

Lexus ES300 2001  Owners Manuals (in English) DRIVING TIPS
331
Hitches
If you wish to install a trailer hitch, your Lexus dealer
should be consulted.
 Use only a hitch which is recommended by Lexus
dealer and conforms to the total trailer weigh

Page 350 of 504

Lexus ES300 2001  Owners Manuals (in English) DRIVING TIPS
333
Tires
Ensure that your vehicles tires are properly inflated.
Adjust  the tire pressure to the recommended cold tire
pressure indicated below:
Tire pressure, kPa (kgf/cm
2 or bar, ps

Page 351 of 504

Lexus ES300 2001  Owners Manuals (in English) DRIVING TIPS
334
Trailer towing tips
When towing a trailer, your vehicle will handle
differently than when not towing.  The three main
causes of vehicle±trailer accidents are driver error,
excessive

Page 356 of 504

Lexus ES300 2001  Owners Manuals (in English) DRIVING TIPS
339

Avoid continuous speeding up and slowing
down.   Stop±and±go driving wastes fuel.
 Avoid unnecessary stopping and braking.
Maintain a steady pace.  Try to time the traffic si gna

Page 360 of 504

Lexus ES300 2001  Owners Manuals (in English) IN CASE OF AN EMERGENCY
343
IF YOUR VEHICLE WILL NOTSTART
(a) Simple checks
Before making these checks, make sure you have
followed the correct starting procedure instructions in
ªHow to start the en