ELECTRICAL COMPONENTS
469
64E082
1Mark 2Acceptable range
2. Look at the beam angle gauge (horizontal
movement). The mark should not deviate by more than
one mark to either side of the gauge.
If the mark is out of the acceptable range of the gauge,
adjust it using bolt B.
After adjusting the headlight in the horizontal direction,
check that the light has been shifted from the adjusted
position in the vertical direction.
If the error is over the value specified above, take the
vehicle to your Lexus dealer to adjust the headlight aim.
REPLACING LIGHT BULBS
The illustration on the following pages show the
locations of light bulbs. If it is necessary to replace a
bulb, take your vehicle to your Lexus dealer as soon as
possible. Use bulbs with the bulb numbers and wattage
ratings given in the table.
CAUTION
Halogen bulbs have pressurized gas inside and require
special handling. They can burst or shatter if scratched
or dropped. Hold a bulb only by its plastic or metal case.
Do not touch the glass part of a bulb with bare hands.
