HARNESSES
86-7-14 REPAIRS
17.Release tail door harness from 13 retaining
clips.
18.Release harness sheath from tail door and 'E'
post.
19.Remove harness from vehicle.Refit
1.Position harness to vehicle and secure in
retaining clips.
2.Secure harness sheath to tail door and 'E' post.
3.Connect multiplugs and washer tube to main
harness, secure multiplugs to body.
4.Connect multiplugs to window motor, wiper
motor and door lock.
5.Position door latch, fit and tighten screws.
6.Connect Lucars to heated rear screen.
7.Position number plate lamp housing, locate
seal and fit spacers.
8.Connect multiplug and Lucars to housing.
9.Fit housing and secure with nuts.
10.Connect washer tube behind spare wheel
carrier.
11.Secure harness clips to spare wheel carrier,
connect multiplug to CHMSL, fit CHMSL and
secure with screws.
12.Fit spare wheel and secure with nuts.
13.Fit tail door plastic sheet.
+ DOORS, REPAIRS, Plastic sheet -
tail door.
14.Fit rear lower trim casing .
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - rear quarter - lower
- 5 door.
