Page 966 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-3
Speaker - rear - 3 door
$% 86.50.12
Remove
1.Remove body rear side casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
2.Remove 4 screws securing speaker to body.
3.Disconnect multiplug from speaker and remove
speaker.
Refit
1.Position speaker to door and connect multiplug.
2.Fit speaker to body and secure with screws.
3.Fit body rear side casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
Speaker - rear - 5 door
$% 86.50.12
Remove
1.Remove rear door trim casing.
+ DOORS, REPAIRS, Trim casing -
rear door - up to 04MY.
2.Remove 4 screws securing speaker to door.
3.Disconnect multiplug from speaker and remove
speaker.
Refit
1.Position speaker to door and connect multiplug.
2.Fit screws securing speaker to door.
3.Fit rear door trim casing.
+ DOORS, REPAIRS, Trim casing -
rear door - up to 04MY.
Page 968 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-5
Aerial - manual - 5 door
$% 86.50.18
Remove
1.Remove lens from front interior lamp.
2.Remove 2 bolts securing front interior lamp to
body.
3.Release interior lamp from headlining,
disconnect multiplug and remove lamp.
4.Remove nut securing coaxial cable to aerial
base.5.Remove aerial base from roof panel and
remove rubber seal.
Refit
1.Position rubber seal and fit aerial base to roof
panel.
2.Connect coaxial cable and secure with nut.
3.Position front interior lamp and connect
multiplug.
4.Fit front interior lamp to headlining and secure
with bolts.
5.Fit lens to rear interior lamp.
Page 972 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-9
Speaker - tweeter - rear - 3 door
$% 86.50.35
The procedure to remove the tweeter on 5 door
models is the same as shown for a 3 door, except
that the rear door trim casing has to be removed and
not the body side rear trim casing.
Remove
1.Remove body side rear trim casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
2.Remove ring securing tweeter and remove
tweeterRefit
1.Fit tweeter, ensuring lug on tweeter is aligned
with cut-out in trim casing, fit and tighten
securing ring.
2.Fit body side rear trim casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
Page 973 of 1007
IN CAR ENTERTAINMENT
86-6-10 REPAIRS
Amplifier - power
$% 86.50.36
Remove
1.Slide LH front seat fully rearwards.
2.Remove 2 bolts securing power amplifier cradle
to bracket.
3.Withdraw power amplifier and cradle assembly,
disconnect multiplug from power amplifier and
remove assembly.4.Remove 3 bolts securing power amplifier to
cradle and remove power amplifier.
Refit
1.Locate power amplifier to cradle and fit and
tighten bolts.
2.Connect multiplug and locate power amplifier
and cradle assembly to bracket.
3.Fit and tighten bolts securing cradle to bracket.
4.Position seat to mid position.
