2001 LAND ROVER FREELANDER bulb

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-9
Console - front - up to 04MY
$% 76.25.01
Remove
1.Remove rear console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - rear.
2.Remove radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
3.Remove gear lever knob.
4. Manual gearbox only: Remove descent
selector.
5.Remove 3 heater control knobs.
6.Remove 2 screws from heater control panel.
7.Remove heater control panel.8.Release tags and remove radio cage.
9.Remove 2 screws from top of console.
10.Remove 4 screws securing heater controls to
centre console.
11.Remove 3 screws from centre and sides of
console.
12.Disconnect multiplugs and bulb holder from
switch pack.
13. Automatic gearbox only: Disconnect
multiplugs from gear selector.

INTERIOR TRIM COMPONENTS
76-3-10 REPAIRS
14.Remove centre console.
15.Remove 4 screws from switch pack assembly
and remove assembly.Refit
1.Position switch pack assembly, fit and tighten
screws.
2.Position console to fascia.
3.Connect multiplugs and bulb holder to switch
pack.
4. Automatic gearbox only: Connect multiplugs
to gear selector.
5.Fit centre console.
6.Fit and tighten screws securing centre and
sides to console.
7.Fit and tighten screws securing switch pack to
console.
8.Fit and tighten screws to top of console.
9.Position radio cage to console and secure with
retaining tags.
10.Position heater control panel, fit and tighten
screws.
11.Fit heater control knobs.
12. Manual gearbox only: Fit descent selector.
13.Fit gear lever knob.
14.Fit radio.

+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
15.Fit rear console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - rear.

LIGHTING
REPAIRS 86-2-5
Lamp assembly - flasher side repeater -
front
$% 86.40.53
Remove
1.Push lamp towards rear of vehicle to release
spring clip, and release lamp from wing.
2.Disconnect multiplug.
Refit
1.Connect multiplug to lamp and secure lamp to
wing.
Lamp assembly - tail
$% 86.40.70
Remove
1.Remove 2 Torx screws securing tail lamp to
bumper. Illustrations show up to 04MY.
2.Release lamp, disconnect multiplug and
remove lamp.
NOTE: Do not carry out further dismantling if
component is removed for access only.
3.Remove multiplug and bulb holders from tail
lamp.
Refit
1.Fit multiplug and bulb holders to replacement
tail lamp.
2.Position tail lamp, connect multiplug and
secure to bumper with Torx screws.

LIGHTING
REPAIRS 86-2-7
Lamp assembly - rear
$% 86.41.15
Remove
1.Remove 3 Torx screws securing lamp to body.
2.Release lamp, disconnect 2 bulb holders and
remove lamp.
3.Remove lamp sealing rubber.
Refit
1.Fit sealing rubber and bulb holders to lamp.
2.Position lamp, fit and tighten Torx screws.
Lamp assembly - centre high mounted
stop (CHMSL)
$% 86.41.32
Remove
1.Remove 3 screws securing CHMSL bracket to
spare wheel carrier.
2.Release lamp bracket and disconnect
multiplug.
3.Remove lamp and bracket.
4.Remove 2 nuts and remove lamp from bracket.
Refit
1.Position lamp to bracket and tighten nuts.
2.Position lamp bracket and connect multiplug to
lamp.
3.Position lamp bracket to spare wheel carrier
and secure with screws.

DRIVER CONTROLS
86-8-4 REPAIRS
Switch - hazard warning - from 04MY
$% 86.65.50
Remove
1.Remove fascia cup holder.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Cup holder - fascia - from 04MY.
2.Release hazard switch from fascia carrier.
3.Disconnect multiplug and remove hazard
warning switch.
Refit
1.Position hazard warning switch and connect
multiplug.
2.Fit switch to fascia carrier.
3.Fit fascia cup holder.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Cup holder - fascia - from 04MY.
Cigar lighter - front
$% 86.65.60
Remove
1.Remove front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
2.Remove cigar lighter element.
3.Remove bulb holder from lighter.
4.Release cigar lighter body from console and
remove.
Refit
1.Fit and secure cigar lighter body to console.
2.Fit bulb holder to lighter.
3.Fit lighter element.
4.Fit front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.