2001 LAND ROVER FREELANDER radiator

CONTENTS
8CONTENTS
COOLING SYSTEM - K SERIES KV6 ...................................................... 26-3-1
ADJUSTMENTS
Coolant - drain and refill.................................................................................................................. 26-3-1
REPAIRS
Cooling fan and motor ................................................................................................................... 26-3-3
Control unit - radiator cooling fan - 2002 MY On ............................................................................ 26-3-3
Radiator assembly ......................................................................................................................... 26-3-4
Thermostat ..................................................................................................................................... 26-3-6
Coolant pump ................................................................................................................................. 26-3-7
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6 ......................... 30-3-1
REPAIRS
Front pipe - Non NAS ..................................................................................................................... 30-3-1
Front pipe - NAS ............................................................................................................................ 30-3-3
Intermediate pipe - Non NAS .......................................................................................................... 30-3-4
Intermediate pipe - NAS ................................................................................................................ 30-3-5
Tail pipe & silencer ......................................................................................................................... 30-3-6
Heat shield - A/C compressor - KV6 - NAS .................................................................................... 30-3-7
Gasket - inlet manifold - LH ............................................................................................................ 30-3-8
Gasket - exhaust manifold - RH - Non NAS ................................................................................... 30-3-9
Gasket(s) - exhaust manifold - RH - KV6 - NAS ............................................................................ 30-3-10
Gasket - exhaust manifold - LH - Non NAS .................................................................................... 30-3-11
Gasket(s) - exhaust manifold - LH - NAS ....................................................................................... 30-3-12
Seals - inlet manifold chamber - up to 03MY .................................................................................. 30-3-13
Seals - inlet manifold chamber - from 03MY................................................................................... 30-3-18
Gasket - inlet manifold - RH............................................................................................................ 30-3-23
OVERHAUL
Seals - manifold chamber - up to 03MY ........................................................................................ 30-3-25
Seals - manifold chamber - from 03MY ......................................................................................... 30-3-27
INTERMEDIATE REDUCTION DRIVE ..................................................... 41-1
ADJUSTMENTS
Intermediate reduction drive (IRD) fluid - drain & refill - Non NAS.................................................. 41-1
Intermediate reduction drive (IRD) lubrication system - drain & refill - NAS .................................. 41-2
REPAIRS
Intermediate reduction drive (IRD) unit - Td4 ................................................................................. 41-3
Intermediate reduction drive (IRD) unit - K1.8 ................................................................................ 41-7
Intermediate reduction drive (IRD) unit - KV6 ................................................................................. 41-10
Gasket - end cover - IRD housing - Td4 ........................................................................................ 41-14
Gasket - end cover - IRD housing - KV6 ...................................................................................... 41-15
Gasket - end cover - IRD housing - K1.8 ....................................................................................... 41-18
Seals - primary gear shaft ............................................................................................................. 41-19
Seal - pinion gear .......................................................................................................................... 41-21
Seal - driveshaft - LH - Td4 & KV6 models ..................................................................................... 41-23
Seal - drive shaft - LH - K1.8 .......................................................................................................... 41-24
Seal - driveshaft - RH .................................................................................................................... 41-25
Seal - pinion gear housing - Td4..................................................................................................... 41-25
Seal - pinion gear housing - K1.8 ................................................................................................... 41-27
Seal - pinion gear housing - KV6 - Non NAS .................................................................................. 41-28
Seal - pinion gear housing - KV6 - NAS ........................................................................................ 41-30

TORQUE WRENCH SETTINGS
06-12
Fuel Delivery System – Diesel
TORQUE DESCRIPTION METRIC IMPERIAL
Air cleaner cover Allen screws 8 Nm 6 lbf.ft
Condenser to radiator bolts 3 Nm 2.2 lbf.ft
Filler neck to body nuts and bolt 9 Nm 6.5 lbf.ft
Fuel cooler to mounting bracket bolts 10 Nm 7 lbf.ft
Fuel cooler matrix to bonnet locking platform nuts 10 Nm 7 lbf.ft
Fuel cut-off (inertia) switch to bracket nuts 2 Nm 1.5 lbf.ft
Fuel injector clamp nuts 10 Nm 7 lbf.ft
Fuel injector pipe union nuts 20 Nm 15 lbf.ft
Fuel injection pump nuts 24 Nm 18 lbf.ft
Fuel injection pump sprocket nut 65 Nm 48 lbf.ft
Fuel injector studs 10 Nm 7 lbf.ft
Fuel pressure regulator Torx screws 9 Nm 6.5 lbf.ft
Fuel pressure sensor 38 Nm 28 lbf.ft
Fuel pump/sender unit to tank locking ring 35 Nm 26 lbf.ft
Fuel rails to support bracket bolt 10 Nm 7.5 lbf.ft
Fuel rail Allen screws 24 Nm 18 lbf.ft
Fuel tank to body bolts 45 Nm 33 lbf.ft
Glow plugs20 Nm 15 lbf.ft
High pressure fuel pipe union nuts 20 Nm 15 lbf.ft
Intercooler to radiator bolts 3 Nm 2.2 lbf.ft
Low pressure fuel rail bolts 10 Nm 7 lbf.ft
Timing case access plug 30 Nm 22 lbf.ft
Turbocharger boost control solenoid valve mounting bracket to turbocharger bolts 10 Nm 7 lbf.ft
Turbocharger boost control solenoid valve to mounting rubber nuts 5 Nm 3.7 lbf.ft
Turbocharger boost pressure sensor to inlet manifold bolt 8 Nm 6 lbf.ft
Turbocharger oil drain pipe bracket bolts 20 Nm 15 lbf.ft
Turbocharger oil drain pipe flange bolts 8 Nm 6 lbf.ft
Turbocharger oil feed pipe banjo bolts 22 Nm 16 lbf.ft
Turbocharger outlet pipe to bracket bolts:
⇒ 6 mm10 Nm 7 lbf.ft
⇒ 8 mm20 Nm 15 lbf.ft
Turbocharger to exhaust manifold bolts 50 Nm 37 lbf.ft

TORQUE WRENCH SETTINGS
06-14
Cooling System – Td4
Cooling System – K1.8
Cooling System – KV6
†Tighten in sequence.
+ Apply sealant, Part No. STC 50552 to threads
TORQUE DESCRIPTION METRIC IMPERIAL
Coolant hose adaptor to cylinder head bolts 8 Nm 6 lbf.ft
Coolant rail (lower) to sump bolts 10 Nm 7.5 lbf.ft
Coolant rail to cylinder head bolt 20 Nm 15 lbf.ft
Coolant rail to exhaust manifold bolt 20 Nm 15 lbf.ft
Coolant pump to cylinder block bolts 10 Nm 7.5 lbf.ft
Fan and motor assembly to fan cowl bolts 5 Nm 4 lbf.ft
Fan cowl to radiator bolts 5 Nm 4 lbf.ft
Fuel cooler to mounting nuts 10 Nm 7.5 lbf.ft
Fuel rail to coolant rail bolt 10 Nm 7.5 lbf.ft
Heatshield to coolant rail Allen screws 8 Nm 6 lbf.ft
Thermostat housing to coolant pump bolts 8 Nm 6 lbf.ft
Upper coolant rail to thermostat housing bolt 8 Nm 6 lbf.ft
TORQUE DESCRIPTION METRIC IMPERIAL
Condenser to radiator bolts 3 Nm 2.2 lbf.ft
Cooling fan control unit mounting bolt 5 Nm 4 lbf.ft
Cooling fan cowl to radiator 5 Nm 4 lbf.ft
Cooling fan and motor assembly to cowl bolts 5 Nm 4 lbf.ft
TORQUE DESCRIPTION METRIC IMPERIAL
Coolant pump to cylinder block bolts
†9 Nm 6.5 lbf.ft
Cooling fan and motor assembly to fan cowl bolts 5 Nm 3.7 lbf.ft
Cooling fan cowl to radiator bolts 5 Nm 3.7 lbf.ft
Cylinder block drain plug
+20 Nm 15 lbf.ft
Injector protection cover to RH fuel rail and inlet manifold bolts 9 Nm 6.5 lbf.ft
Radiator baffle bolts 5 Nm 3.7 lbf.ft
Thermostat housing flange / coolant elbow bolt 18 Nm 13 lbf.ft

TORQUE WRENCH SETTINGS
06-33
Air Conditioning
TORQUE DESCRIPTION METRIC IMPERIAL
A/C compressor to mounting bracket bolts (Td4 & K1.8) 25 Nm 18 lbf.ft
A/C compressor mounting bracket to cylinder block bolts (Td4 & K1.8) 45 Nm 33 lbf.ft
A/C compressor mounting bracket to cylinder block bolts (KV6) 45 Nm 33 lbf.ft
A/C compressor support bracket to sump bolt (Td4) 10 Nm 7.5 lbf.ft
A/C compressor drive belt tensioner clamp bolt (Td4) 24 Nm 18 lbf.ft
A/C compressor drive belt tensioner pivot bolt (Td4) 24 Nm 18 lbf.ft
A/C compressor upper and lower securing bolts (KV6) 25 Nm 18 lbf.ft
A/C pipe rail to condenser bolt (KV6) 8 Nm 6 lbf.ft
A/C pipe rail to condenser bolt (KV6) 8 Nm 6 lbf.ft
Condenser bracket to radiator bolts 8 Nm 6 lbf.ft
Receiver drier to condenser bolts 12 Nm 9 lbf.ft
Refrigerant pressure sensor 10 Nm 7.5 lbf.ft
TXV to bulkhead Allen screws 25 Nm 18 lbf.ft

MAINTENANCE
10-12 MAINTENANCE
Anti-freeze
Replace
1.Replace anti-freeze.

+ COOLING SYSTEM - Td4,
ADJUSTMENTS, Coolant - drain and refill.

+ COOLING SYSTEM - K SERIES KV6,
ADJUSTMENTS, Coolant - drain and refill.

+ COOLING SYSTEM - K SERIES 1.8,
ADJUSTMENTS, Coolant - drain & refill.
Cooling System and Intercooler
Check
1.Check for any obstructions in the radiator
matrix and remove debris as necessary.
2.Check condition of all coolant hoses. Check for
any signs of leakage or chafing.
3.Check tightness of accessible hose clips.
4.Check for any obstructions in the intercooler
matrix and remove debris as necessary (diesel
only).
5.Check intercooler hoses for security and
condition.
6.Check security of radiator and intercooler
mountings.
Coolant Level
1.Check coolant level and top up if necessary.

ENGINE - K SERIES KV6
12-3-28 REPAIRS
25.Release clips and disconnect heater feed and
return hoses.
26.Release top hose from support bracket, release
clip and disconnect top hose from radiator.
27.Release clip and disconnect expansion tank
hose from inlet manifold.28.Release clip and disconnect hose from
underside of expansion tank.
29.Depress locking collar and disconnect brake
servo hose from inlet manifold chamber.
30.Raise vehicle on ramp.
31.Remove front road wheels.
32.Release stake in drive shaft nuts.
M12 6771M12 6774

ENGINE - K SERIES KV6
12-3-34 REPAIRS
38.With assistant depressing the brake pedal,
tighten front hub nuts to 400 Nm (295 lbf.ft).
39.Stake nut to shaft.
40.Fit front road wheels, fit and tighten nuts to 115
Nm (85 lbf.ft).
41.Lower vehicle on ramp.
42.Connect brake servo vacuum hose to inlet
manifold chamber.
43.Connect coolant hose to underside of
expansion tank and secure with clip.
44.Connect expansion tank hose to inlet manifold
and secure clip.
45.Connect top hose to radiator and secure with
clip. Position hose in bracket.
46.Connect heater feed and return hoses and
secure with clips.
47.Connect throttle inner cable to throttle cam and
secure outer cable in abutment bracket, if fitted.
48.Secure throttle cable in clips on harness
brackets, if fitted.
49.Adjust throttle cable, if fitted.

+ FUEL DELIVERY SYSTEM -
PETROL, ADJUSTMENTS, Throttle cable -
check and adjust - KV6.
50.Connect hose to purge control valve.
51.Connect fuel hose to fuel rail pipe, fit rubber
sleeve over hose connector.
52.Connect gearbox harness multiplugs and
secure multiplugs in mounting bracket clips.
53.Connect Lucar connector to starter solenoid.
54.Position earth lead to gearbox housing, fit and
tighten bolt to 25 Nm (18 lbf.ft).
55.Position engine harness to 'E' box mounting
bracket and secure with clips.
56.Connect earth header multiplug.
57.Connect multiplug to underbonnet fuse box.
58.Position battery and starter motor lead to
underbonnet fuse box, fit and tighten bolts to 8
Nm (6 lbf.ft).
59.Fit underbonnet fuse box cover.
60.Position 'E' box, secure in retaining clip, fit and
tighten nut to 9 Nm (7 lbf.ft).
61.Position carrier in 'E' box and secure with clips.
62.Position and secure air duct and harness
rubber sleeve in 'E' box.
63.Connect multiplugs securing main harness to
engine harness.
64.Position ECM harness and multiplug to 'E' box,
align harness clamp and secure screws to 'E'
box.
65.Fit engine ECM.

+ ENGINE MANAGEMENT SYSTEM -
SIEMENS, REPAIRS, Engine control module
(ECM) - Non NAS.
66.Fit battery carrier.

+ CHARGING AND STARTING,
REPAIRS, Carrier - battery.67.Fill cooling system.

+ COOLING SYSTEM - K SERIES KV6,
ADJUSTMENTS, Coolant - drain and refill.
68.Connect battery earth lead.
69.Fill gearbox with fluid.

+ AUTOMATIC GEARBOX - JATCO,
ADJUSTMENTS, Gearbox fluid - drain &
refill.
70.Fit engine acoustic cover.

+ ENGINE - K SERIES KV6, REPAIRS,
Cover - engine acoustic.

ENGINE - K SERIES KV6
12-3-38 REPAIRS
32.Release clips and disconnect heater feed and
return hoses from matrix.
33.Release top hose from support bracket, release
clip and disconnect top hose from radiator.34.Release clip and disconnect expansion tank
hose from inlet manifold.
35.Release clip and disconnect hose from
underside of expansion tank.
36.Depress locking collar and disconnect brake
servo hose from inlet manifold chamber.
CAUTION: Always fit plugs to open
connections to prevent contamination.
M12 6774