SMT955C
4. Align dowel pin hole and mounting bolt hole of sub-oil pump
assembly with center case. Then tighten bolts.
:7-9N´m(0.7 - 0.9 kg-m, 61 - 78 in-lb)
SMT956C
5. Apply ATF or petroleum jelly to new O-ring and install it to
transfer motor.
6. Fit double-flat end of transfer motor shaft into slot of sub-oil
pump assembly. Then tighten bolts.
: 41 - 48 N´m (4.2 - 4.9 kg-m, 30 - 35 ft-lb)
SMT957C
Main Oil PumpNBTF0083S031. Install inner gear and outer gear in the main oil pump housing
with their identification marks facing toward center case
mounting surface side. Then, measure the side clearance.
Refer to ªMain Oil Pumpº, ªCenter Caseº, TF-138.
SMT930C
2. Install main oil pump assembly to center case assembly, and
tighten bolts.
:7-9N´m(0.7 - 0.9 kg-m, 61 - 78 in-lb)
3. Install oil pump shaft to main oil pump, then install rear case
assembly to center case.
Refer to ªFinal Assemblyº, TF-153.
ASSEMBLY
Center Case (Cont'd)
TF-146
