2001 DODGE RAM display

ROAD TEST
DESCRIPTION - ROAD TEST INSPECTION
The following items must be inspected during the
road test portion of the new vehicle inspection.
²Check neutral safety switch operation
²Check operation of shift/clutch interlock system
²Check operation of gauges and warning lights
²Check horn operation
²Check operation of turn signals and emergency
flashers
²Check all mirror adjustments, including day/
night function
²Check windshield wipers for proper wipe pattern
and intermittent mode (if equipped)
²Check washer spray pattern
²Check heater, defroster and air conditioning for
proper operation
²Check that the fan operates quietly
²Check the rear window defroster (if equipped)
²Leave air selection lever in the fresh air position
²Check the rear heater and air conditioning for
proper operation
²Check the rear air register locations
²Check that the indicator lamps operate properly
²Check the operation of the radio, cassette and/or
compact disc player, and that sound quality is good
²Ensure that the clock displays the correct time
²Check that the trip computer/maintenance
reminder operates in all modes
²Check all speed control functions
²Check the service brakes to ensure that they
stop the vehicle in a straight line, without noise,
shudder or vibration
²Check the brake warning light
²Check the parking brake operation
²Check the engine's performance
²Check the transmission's performance for
smooth, quiet operation. If the vehicle is a 4x4, check
that the transfer case shifts easily among all ranges
²Check Autostick function (if equipped)
²Check the vehicle's steering and handling
²The steering wheel should be centered when
traveling in a straight line
²The vehicle should not pull or vibrate
²Check for squeaks, rattles and wind noise
²Check any other vehicle aspects you believe are
important, but that may not be included on the New
Vehicle Preparation Form
²Fill fuel tank with specified grade of fuel
INSPECTION - FUEL
Fill fuel tank with specified grade of gasoline (reg-
ular, midgrade or premium).
INSPECTION - OTHER
As part of DaimlerChrysler's Customer One philos-
ophy, the ªOtherº blank is provided on the New Vehi-
cle Preparation Form. This is designed to encourage
you to check any aspects of vehicle operation that
you believe are important to your customers, but that
do not appear elsewhere on the form.
INSPECTION - SQUEAKS, RATTLES AND WIND
NOISE
(1) Make sure that the instrument panel, glove
box, seats, steering wheel and column are free from
squeaks and rattles. Tighten any obvious loose fas-
teners.
(2) Check that the windows and doors are free
from squeaks, rattles and wind noise.
(3) Check that the vehicle exterior is free from
squeaks, rattles and noise, front and rear.
(4) Make sure that all interior panels are free from
squeaks and rattles.
INSPECTION - STEERING AND HANDLING
(1) Check that the power assist works properly (if
equipped). Steering should not require excessive
effort.
(2) Make sure the steering wheel does not vibrate
at idle or road speed.
(3) Ensure that the steering wheel is centered
when traveling straight ahead.
(4) Check that the vehicle does not drift to one
side.
(5) Make sure that the vehicle does not vibrate/
shake.
INSPECTION - TRANSMISSION/TRANSFER
CASE
AUTOMATIC TRANSMISSION
(1) Make sure that the park lock holds the vehicle
With the vehicle on a grade, put automatic trans-
mission in PARK and slowly release the service
brake to see if park lock holds. If it does not hold, the
transmission requires further service.
(2) Make sure shift lever operates easily/ smoothly
(Fig. 36).
Check for smooth shifting. Check for proper
upshifting and downshifting.
MANUAL TRANSMISSION
(1) Check that the shifter operates easily (Fig. 38).
(2) Make sure that the clutch operates smoothly
(Fig. 37).
(3) Look for proper synchronization.
The gears should not grind.
BR/BENEW VEHICLE PREPARATION 30 - 15

INSPECTION - PARKING BRAKE
(1) Ensure that the parking brake is easy to oper-
ate (Fig. 40).
(2) Make sure the parking brake does not drag.
(3) With the vehicle stopped on a grade, firmly
apply the service brakes, place the transmission in
NEUTRAL and set the parking brake. Slowly release
the service brakes to see if the parking brake will
hold.
(4) Check that the parking brake warning light
comes on when the parking brake is applied, and is
off when the brake is released.
INSPECTION - SERVICE BRAKES
(1) Check brake warning light operation at vehicle
startup.
(2) Check ABS warning light operation at vehicle
startup.
(3) Inspect service brake pedal travel and feel (Fig.
41).
(4) Put the vehicle in gear and apply the brakes
while the car is in motion. Be sure brake operation is
smooth and positive.
(5) Make sure that the vehicle stops in a straight
line, without pulling to one side.
(6) Check that the brakes operate quietly, without
noise.
(7) Ensure there is no shudder or vibration when
braking.
INSPECTION - SPEED CONTROL
Check the following speed control functions (Fig.
42):²Check on/off switch
²Check ªsetº operation
²Check ªresumeº function
²Check ªaccelerateº and ªdecelerateº functions
²Check brake release function
²Check ªcancelº function
INSPECTION - TRIP COMPUTER/
MAINTENANCE REMINDER
NOTE: Reset the average fuel economy when the
road test is complete.
Check that all modes operate correctly (Fig. 43).
INSPECTION - RADIO
(1) Check for good AM/FM reception, ensure that
the cassette and/or compact disc (CD) player works
properly (Fig. 44).
(2) Check for good sound quality from all speakers.
(3) Ensure that the radio displays the correct time.
(4) Check the steering wheel controls (if equipped).
INSPECTION - HEATER/AIR CONDITIONER
(1) Check that heater/defroster works properly
(Fig. 45).
(2) Turn on the heater when the engine reaches
operating temperature.
(3) Operate the blower motor in all speeds.
(4) Operate system in all modes (heat, defrost,
etc.).
(5) Operate the rear heater (if equipped).
(6) Check for hot air output at all outlets.
Fig. 40 PARKING BRAKE OPERATION
Fig. 41 SERVICE BRAKE PEDAL
BR/BENEW VEHICLE PREPARATION 30 - 17
ROAD TEST (Continued)

DIESEL - DESCRIPTION................25-1
DIESEL - DESCRIPTION........14-102,14-103
DIESEL - DESCRIPTION.................8I-5
DIESEL - DESCRIPTION, 5.9L............11-3
DIESEL - DESCRIPTION, BELT
TENSIONERS - 5.9L...................7-23
DIESEL - DESCRIPTION, COOLANT
RECOVERY CONTAINER - 3.9L/5.2L/
5.9L/5.9L............................7-41
DIESEL - DESCRIPTION, COOLING
SYSTEM FLOW - 5.9L...................7-1
DIESEL - DESCRIPTION, ENGINE 5.9L....9-231
DIESEL - DESCRIPTION, ENGINE BLOCK
HEATER - 5.9L........................7-47
DIESEL - DESCRIPTION, ENGINE
COOLANT THERMOSTAT - 5.9L...........7-54
DIESEL - DESCRIPTION, FAN DRIVE
VISCOUS CLUTCH - 5.9L...............7-57
DIESEL - DESCRIPTION, MAINTENANCE
SCHEDULES - 24-VALVE CUMMINS
TURBO..............................0-22
DIESEL - DESCRIPTION, RADIATOR -
5.9L................................7-63
DIESEL - DESCRIPTION, TRANS COOLER
- 5.9L..............................7-85
DIESEL - DESCRIPTION, VACUUM PUMP
- 5.9L..............................7-34
DIESEL - DESCRIPTION, WATER PUMP -
5.9L................................7-73
DIESEL - FUEL INJECTOR FIRING ORDER . 14-58
DIESEL - INSPECTION, EXHAUST PIPE -
5.9L................................11-9
DIESEL - INSPECTION, RADIATOR - 5.9L . . . 7-65
DIESEL - INSPECTION, RADIATOR FAN -
5.9L................................7-44
DIESEL - INSPECTION, TAILPIPE - 5.9L . . . 11-12
DIESEL - INSPECTION, WATER PUMP -
5.9L................................7-73
DIESEL - INSTALLATION..............14-103
DIESEL - INSTALLATION................8I-8
DIESEL - INSTALLATION, BELT
TENSIONERS - 5.9L...................7-23
DIESEL - INSTALLATION, COOLANT
RECOVERY CONTAINER - 3.9L/5.2L/
5.9L/5.9L............................7-41
DIESEL - INSTALLATION, DRIVE BELTS -
5.9L................................7-34
DIESEL - INSTALLATION, ENGINE BLOCK
HEATER - 5.9L........................7-47
DIESEL - INSTALLATION, ENGINE
COOLANT THERMOSTAT - 5.9L...........7-55
DIESEL - INSTALLATION, EXHAUST PIPE
- 5.9L..............................11-10
DIESEL - INSTALLATION, MUFFLER -
5.9L...............................11-11
DIESEL - INSTALLATION, RADIATOR -
5.9L................................7-65
DIESEL - INSTALLATION, RADIATOR FAN
- 5.9L..............................7-45
DIESEL - INSTALLATION, TAILPIPE - 5.9L . 11-12
DIESEL - INSTALLATION, TRANS
COOLER - 5.9L.......................7-88
DIESEL - INSTALLATION, VACUUM
PUMP - 5.9L.........................7-37
DIESEL - INSTALLATION, WATER PUMP -
5.9L................................7-74
DIESEL - OPERATION
.................8E-18
DIESEL - OPERATION
.................25-19
DIESEL - OPERATION
..........14-102,14-103
DIESEL - OPERATION
...................8I-5
DIESEL - OPERATION, BELT
TENSIONERS - 5.9L
...................7-23
DIESEL - OPERATION, COOLANT
RECOVERY CONTAINER - 3.9L/5.2L/
5.9L/5.9L
............................7-41
DIESEL - OPERATION, ENGINE BLOCK
HEATER - 5.9L
........................7-47
DIESEL - OPERATION, ENGINE COOLANT
THERMOSTAT - 5.9L
...................7-54
DIESEL - OPERATION, FAN DRIVE
VISCOUS CLUTCH - 5.9L
...............7-57
DIESEL - OPERATION, FUEL DELIVERY
. . . 14-56
DIESEL - OPERATION, NON-MONITORED
CIRCUITS
...........................25-23
DIESEL - OPERATION, RADIATOR - 5.9L
. . . 7-63
DIESEL - OPERATION, TRANS COOLER -
5.9L
................................7-85DIESEL - OPERATION, VACUUM PUMP -
5.9L................................7-35
DIESEL - OPERATION, WATER PUMP -
5.9L................................7-73
DIESEL - REMOVAL............14-103,14-104
DIESEL - REMOVAL....................8I-7
DIESEL - REMOVAL, BELT TENSIONERS -
5.9L................................7-23
DIESEL - REMOVAL, COOLANT
RECOVERY CONTAINER - 3.9L/5.2L/
5.9L/5.9L............................7-41
DIESEL - REMOVAL, DRIVE BELTS - 5.9L . . 7-33
DIESEL - REMOVAL, ENGINE BLOCK
HEATER - 5.9L........................7-47
DIESEL - REMOVAL, ENGINE COOLANT
THERMOSTAT - 5.9L...................7-55
DIESEL - REMOVAL, EXHAUST PIPE -
5.9L................................11-9
DIESEL - REMOVAL, MUFFLER - 5.9L.....11-11
DIESEL - REMOVAL, RADIATOR - 5.9L.....7-63
DIESEL - REMOVAL, RADIATOR FAN -
5.9L................................7-44
DIESEL - REMOVAL, TAILPIPE - 5.9L.....11-12
DIESEL - REMOVAL, VACUUM PUMP -
5.9L................................7-35
DIESEL - REMOVAL, WATER PUMP -
5.9L................................7-73
DIESEL ENGINE - DESCRIPTION, FUEL
REQUIREMENTS.......................0-2
DIESEL ENGINE - DIAGNOSIS AND
TESTING............................11-4
DIESEL ENGINE - DIAGNOSIS AND
TESTING, COOLING SYSTEM............7-12
DIESEL ENGINE - INSTALLATION........19-35
DIESEL ENGINE - REMOVAL............19-33
DIESEL ENGINE - STANDARD
PROCEDURE, DRAINING COOLING
SYSTEM 5.9L........................7-15
DIESEL ENGINE - STANDARD
PROCEDURE, REFILLING COOLING
SYSTEM 5.9L........................7-15
DIESEL ENGINE - TORQUE.............14-90
DIESEL ENGINE, SPECIAL TOOLS - 5.9L . . 9-244
DIESEL ENGINES - DESCRIPTION,
COMPONENT MONITORS..............25-18
DIESEL ENGINES - FUEL SYSTEM
PRESSURES........................14-58
DIESEL FUEL DELIVERY SYSTEM -
DESCRIPTION.......................14-54
DIESEL FUEL INJECTION SYSTEM -
DESCRIPTION.......................14-87
DIESEL FUEL SYSTEM, SPECIAL TOOLS . . 14-59
DIESEL FUEL TANK - DESCRIPTION......14-78
DIESEL, SPECIFICATIONS - 5.9L.........9-242
DIESEL WITH AUTO. TRANS. -
INSTALLATION..................8P-11,8P-4
DIESEL WITH AUTO. TRANS. - REMOVAL . . 8P-4,
8P-8
DIFFERENTIAL - ASSEMBLY . . 3-128,3-159,3-188,
3-37,3-69,3-98
DIFFERENTIAL - DISASSEMBLY....3-128,3-158,
3-188,3-36,3-68,3-97
DIFFERENTIAL - INSTALLATION....3-129,3-159,
3-188,3-37,3-69,3-98
DIFFERENTIAL - POWR-LOK - ASSEMBLY . 3-163
DIFFERENTIAL - POWR-LOK -
DISASSEMBLY.......................3-161
DIFFERENTIAL - REMOVAL . . 3-127,3-158,3-187,
3-36,3-68,3-96
DIFFERENTIAL - TRAC-LOK - ASSEMBLY . . 3-101,
3-132,3-190
DIFFERENTIAL - TRAC-LOK -
DISASSEMBLY..............3-130,3-190,3-99
DIFFERENTIAL CASE BEARINGS -
INSTALLATION . . . 3-103,3-134,3-164,3-192,3-39,
3-71
DIFFERENTIAL CASE BEARINGS -
REMOVAL . . . 3-103,3-134,3-164,3-192,3-39,3-71
DIMENSION, SPECIFICATIONS - FRAME....13-7
DIMENSIONS, SPECIFICATIONS - BODY
OPENING...........................23-60
DIODE - INSTALLATION............8W-01-10
DIODE - REMOVAL
................8W-01-10
DIODE REPLACEMENT - STANDARD
PROCEDURE
.........................24-7
DISC - DESCRIPTION, CLUTCH
............6-7
DISC - INSTALLATION, CLUTCH
...........6-9
DISC - OPERATION, CLUTCH
.............6-8DISC - REMOVAL, CLUTCH...............6-8
DISC BRAKE CALIPERS - ASSEMBLY......5-12
DISC BRAKE CALIPERS - CLEANING......5-12
DISC BRAKE CALIPERS - DISASSEMBLY . . . 5-11
DISC BRAKE CALIPERS - INSPECTION.....5-12
DISC BRAKE ROTOR - DIAGNOSIS AND
TESTING............................5-20
DISC BRAKES - DESCRIPTION,
2500/3500 WITH REAR.................5-35
DISC BRAKES - INSTALLATION, REAR
PARK BRAKE CABLE - 2500/3500
WITH REAR..........................5-38
DISC BRAKES - OPERATION, 2500/3500
WITH REAR..........................5-36
DISC BRAKES - REMOVAL, REAR PARK
BRAKE CABLE - 2500/3500 WITH
REAR...............................5-37
DISCHARGE LINE - INSTALLATION,
SUCTION...........................24-51
DISCHARGE LINE - REMOVAL, SUCTION . . 24-50
DISPLAY TEST MODE - DESCRIPTION,
STATE ..............................25-1
DISTRIBUTION - DESCRIPTION, POWER . 8W-97-1
DISTRIBUTION - OPERATION, POWER . . 8W-97-1
DISTRIBUTION CENTER - DESCRIPTION,
POWER..........................8W-97-7
DISTRIBUTION CENTER - INSTALLATION,
POWER..........................8W-97-8
DISTRIBUTION CENTER - OPERATION,
POWER..........................8W-97-8
DISTRIBUTION CENTER - REMOVAL,
POWER...........................8W-97-8
DISTRIBUTION SYSTEMS, SPECIAL
TOOLS - POWER...................8W-97-2
DISTRIBUTOR - DESCRIPTION..........8I-10
DISTRIBUTOR - INSTALLATION..........8I-11
DISTRIBUTOR - OPERATION............8I-11
DISTRIBUTOR - REMOVAL..............8I-11
DISTRIBUTOR BUSHING - INSTALLATION . 9-150,
9-37,9-94
DISTRIBUTOR BUSHING - REMOVAL.....9-150,
9-37,9-94
DISTRIBUTOR CAP - DIAGNOSIS AND
TESTING............................8I-12
DISTRIBUTOR ROTOR - DIAGNOSIS AND
TESTING............................8I-13
DOME LAMP - INSTALLATION..........8L-33
DOME LAMP - REMOVAL..............8L-33
DOOR - ADJUSTMENT, CARGO..........23-78
DOOR - INSTALLATION...........23-68,23-78
DOOR - INSTALLATION, BLEND.........24-38
DOOR - INSTALLATION, FUEL FILL.......23-95
DOOR - INSTALLATION, HEAT/DEFROST . . . 24-39
DOOR - INSTALLATION, PANEL/DEFROST . . 24-39
DOOR - INSTALLATION, RECIRCULATION . . 24-39
DOOR - REMOVAL...............23-68,23-78
DOOR - REMOVAL, BLEND.............24-38
DOOR - REMOVAL, FUEL FILL..........23-95
DOOR - REMOVAL, HEAT/DEFROST......24-38
DOOR - REMOVAL, PANEL/DEFROST.....24-38
DOOR - REMOVAL, RECIRCULATION.....24-39
DOOR ACTUATOR - INSTALLATION,
BLEND.............................24-26
DOOR ACTUATOR - INSTALLATION,
HEAT/DEFROST......................24-27
DOOR ACTUATOR - INSTALLATION,
PANEL/DEFROST
.....................24-27
DOOR ACTUATOR - INSTALLATION,
RECIRCULATION
.....................24-28
DOOR ACTUATOR - REMOVAL, BLEND
....24-25
DOOR ACTUATOR - REMOVAL,
HEAT/DEFROST
......................24-26
DOOR ACTUATOR - REMOVAL,
PANEL/DEFROST
.....................24-27
DOOR ACTUATOR - REMOVAL,
RECIRCULATION
.....................24-27
DOOR AJAR SWITCH - DESCRIPTION
....8L-34
DOOR AJAR SWITCH - DIAGNOSIS AND
TESTING
...........................8L-34
DOOR AJAR SWITCH - INSTALLATION
....8L-35
DOOR AJAR SWITCH - REMOVAL
........8L-35
DOOR CYLINDER LOCK SWITCH -
DESCRIPTION
........................8N-5
DOOR CYLINDER LOCK SWITCH -
DIAGNOSIS & TESTING
................8N-5
DOOR CYLINDER LOCK SWITCH -
INSTALLATION
.......................8N-6
BR/BEINDEX 11
Description Group-Page Description Group-Page Description Group-Page

MANIFOLD - INSTALLATION, INTAKE.....9-111,
9-166,9-223,9-302,9-53
MANIFOLD - OPERATION, EXHAUST.....9-112,
9-168,9-224,9-55
MANIFOLD - OPERATION, FUEL DRAIN . . . 14-86
MANIFOLD - OPERATION, INTAKE . . 9-109,9-165,
9-52
MANIFOLD - REMOVAL, EXHAUST . . 9-112,9-168,
9-225,9-303,9-55
MANIFOLD - REMOVAL, FUEL DRAIN.....14-86
MANIFOLD - REMOVAL, INTAKE . . . 9-110,9-166,
9-222,9-301,9-53
MANIFOLD LEAKAGE - DIAGNOSIS AND
TESTING, INTAKE......9-110,9-165,9-222,9-53
MANUAL BLEEDING - STANDARD
PROCEDURE..........................5-7
MANUAL, NV3500....................21-41
MANUAL, NV4500....................21-83
MANUAL TRANSMISSION - DIAGNOSIS
AND TESTING..............21-3,21-46,21-93
MANUAL TRANSMISSION -
INSTALLATION, SHIFT BOOT...........23-122
MANUAL TRANSMISSION - REMOVAL,
SHIFT BOOT........................23-122
MANUAL TRANSMISSION, SPECIAL
TOOLS - NV5600....................21-127
MAP SENSOR - INSTALLATION.........14-104
MARKER LAMP - INSTALLATION........8L-23
MARKER LAMP - REMOVAL............8L-22
MASTER CYLINDER - DESCRIPTION......5-29
MASTER CYLINDER - INSTALLATION.......5-30
MASTER CYLINDER - OPERATION........5-29
MASTER CYLINDER - REMOVAL..........5-30
MASTER CYLINDER BLEEDING -
STANDARD PROCEDURE................5-30
MASTER CYLINDER/POWER BOOSTER -
DIAGNOSIS AND TESTING..............5-29
MATCH MOUNTING - STANDARD
PROCEDURES........................22-2
MATS - INSTALLATION, CARPETS AND
FLOOR............................23-123
MATS - REMOVAL, CARPETS AND
FLOOR............................23-123
MEASUREMENT - STANDARD
PROCEDURES, CASTER CORRECTION......2-3
MEASUREMENTS, SPECIFICATIONS -
BODY GAP AND FLUSH................23-56
MEASURING TIMING CHAIN STRETCH -
INSPECTION..........9-114,9-170,9-227,9-58
MECHANICAL - DIAGNOSIS AND
TESTING...............9-120,9-175,9-6,9-63
MECHANICAL - DIAGNOSIS AND
TESTING, ENGINE DIAGNOSIS..........9-232
MECHANISM - ADJUSTMENT, SHIFT....21-252,
21-423,21-596,21-769
MECHANISM - DESCRIPTION, SHIFT....21-251,
21-422,21-595,21-768
MECHANISM - INSTALLATION, SHIFT.....21-89
MECHANISM - OPERATION, SHIFT......21-251,
21-422,21-595,21-768
MECHANISM - REMOVAL, SHIFT........21-88
MEDIUM DUTY TRUCK MAINTENANCE
SCHEDULE (8.0L 2500 & 3500
MODELS - CALIFORNIA ONLY) -
DESCRIPTION........................0-13
METRIC SYSTEM - DESCRIPTION......Intro.-6
MILE, SPECIFICATIONS - TIRE
REVOLUTIONS PER....................22-9
MINI-TRIP COMPUTER - DIAGNOSIS &
TESTING, COMPASS..................8M-10
MIRROR - DESCRIPTION, AUTOMATIC
DAY / NIGHT........................8N-10
MIRROR - DESCRIPTION, SIDEVIEW.....8N-13
MIRROR - DIAGNOSIS AND TESTING,
AUTOMATIC DAY/NIGHT...............8N-11
MIRROR - DIAGNOSIS AND TESTING,
SIDEVIEW..........................8N-13
MIRROR - INSPECTION................30-19
MIRROR - INSTALLATION, AUTOMATIC
DAY / NIGHT........................8N-12
MIRROR - INSTALLATION, REAR VIEW
. . 23-126
MIRROR - INSTALLATION, SIDE VIEW
....23-97
MIRROR - LOW MOUNTED -
INSTALLATION, SIDE VIEW
.............23-98
MIRROR - LOW MOUNTED - REMOVAL,
SIDE VIEW
..........................23-98
MIRROR - OPERATION, AUTOMATIC DAY
/ NIGHT
............................8N-11MIRROR - OPERATION, SIDEVIEW.......8N-13
MIRROR - REMOVAL, AUTOMATIC DAY /
NIGHT.............................8N-12
MIRROR - REMOVAL, REAR VIEW......23-126
MIRROR - REMOVAL, SIDE VIEW........23-97
MIRROR - REMOVAL, SIDEVIEW........8N-14
MIRROR FLAG - INSTALLATION, SIDE
VIEW..............................23-74
MIRROR FLAG - REMOVAL, SIDE VIEW . . . 23-74
MIRROR GLASS - INSTALLATION, SIDE
VIEW..............................23-98
MIRROR GLASS - REMOVAL, SIDE VIEW . . 23-98
MIRROR GRID - DESCRIPTION, HEATED . . . 8G-4
MIRROR GRID - DIAGNOSIS AND
TESTING, HEATED.....................8G-4
MIRROR GRID - OPERATION, HEATED.....8G-4
MIRROR SUPPORT BRACKET -
INSTALLATION, REARVIEW............23-126
MIRROR SWITCH - DESCRIPTION........8G-3
MIRROR SWITCH - DESCRIPTION,
POWER............................8N-12
MIRROR SWITCH - DIAGNOSIS AND
TESTING, HEATED.....................8G-3
MIRROR SWITCH - INSTALLATION,
POWER............................8N-13
MIRROR SWITCH - OPERATION..........8G-3
MIRROR SWITCH - OPERATION, POWER . . 8N-12
MIRROR SWITCH - REMOVAL, POWER . . . 8N-12
MIRROR SYSTEM - DESCRIPTION,
HEATED..............................8G-1
MIRROR SYSTEM - DIAGNOSIS AND
TESTING, HEATED.....................8G-2
MIRROR SYSTEM - OPERATION, HEATED . . 8G-2
MIRRORS - DESCRIPTION, POWER......8N-10
MIRRORS - OPERATION, POWER........8N-10
MODE - DESCRIPTION, CIRCUIT
ACTUATION TEST.....................25-1
MODE - DESCRIPTION, STATE DISPLAY
TEST...............................25-1
MODES OF OPERATION - DESCRIPTION . . . 8E-14
MODULE - DESCRIPTION, AIRBAG
CONTROL...........................8O-6
MODULE - DESCRIPTION, BODY
CONTROL/CENTRAL TIMER..............8E-1
MODULE - DESCRIPTION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - DESCRIPTION, FUEL PUMP....14-12
MODULE - DESCRIPTION, FUEL TANK....14-78
MODULE - DESCRIPTION, WIPER.......8R-14
MODULE - DIAGNOSIS AND TESTING,
CENTRAL TIMER......................8E-4
MODULE - INSTALLATION, AIRBAG
CONTROL...........................8O-8
MODULE - INSTALLATION, BODY
CONTROL/CENTRAL TIMER..............8E-6
MODULE - INSTALLATION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - INSTALLATION, ENGINE
CONTROL..........................8E-14
MODULE - INSTALLATION, FUEL PUMP . . . 14-13
MODULE - INSTALLATION, FUEL TANK....14-79
MODULE - INSTALLATION, POWERTRAIN
CONTROL..........................8E-20
MODULE - INSTALLATION, WIPER.......8R-15
MODULE - OPERATION, AIRBAG
CONTROL...........................8O-6
MODULE - OPERATION, BODY
CONTROL/CENTRAL TIMER..............8E-3
MODULE - OPERATION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - OPERATION, FUEL PUMP.....14-13
MODULE - OPERATION, FUEL TANK......14-78
MODULE - OPERATION, WIPER.........8R-14
MODULE - REMOVAL, AIRBAG CONTROL . . 8O-7
MODULE - REMOVAL, BODY CONTROL/
CENTRAL TIMER......................8E-5
MODULE - REMOVAL, DAYTIME
RUNNING LAMP......................8L-9
MODULE - REMOVAL, ENGINE CONTROL . . 8E-14
MODULE - REMOVAL, FUEL PUMP.......14-13
MODULE - REMOVAL, FUEL TANK.......14-78
MODULE - REMOVAL, POWERTRAIN
CONTROL..........................8E-19
MODULE - REMOVAL, WIPER
...........8R-14
MOLDING - INSTALLATION, ROOF JOINT
. . 23-91
MOLDING - REMOVAL, ROOF JOINT
......23-91
MOLDINGS - INSTALLATION, BODY SIDE
. . 23-87
MOLDINGS - REMOVAL, BODY SIDE
.....23-87MOLEX - INSTALLATION, CONNECTOR . 8W-01-9
MOLEX - REMOVAL, CONNECTOR.....8W-01-9
MONITORED SYSTEMS - DESCRIPTION . . . 25-15
MONITORS - DIESEL ENGINES -
DESCRIPTION, COMPONENT............25-18
MONITORS - GAS ENGINES -
DESCRIPTION, COMPONENT............25-18
MOTOR - ASSEMBLY, AXLE VACUUM . . 3-33,3-65
MOTOR - DESCRIPTION, AXLE VACUUM . . . 3-29,
3-62
MOTOR - DESCRIPTION, BLOWER.......24-32
MOTOR - DESCRIPTION, ENGINE
STARTER ...........................8F-39
MOTOR - DESCRIPTION, IDLE AIR
CONTROL..........................14-41
MOTOR - DESCRIPTION, LUMBAR.......8N-18
MOTOR - DESCRIPTION, POWER LOCK....8N-6
MOTOR - DESCRIPTION, RECLINER......8N-20
MOTOR - DESCRIPTION, WINDOW......8N-26
MOTOR - DIAGNOSIS AND TESTING,
BLOWER...........................24-33
MOTOR - DIAGNOSIS AND TESTING,
POWER LOCK........................8N-7
MOTOR - DIAGNOSIS AND TESTING,
STARTER ...........................8F-39
MOTOR - DIAGNOSIS AND TESTING,
VACUUM........................3-31,3-63
MOTOR - DIAGNOSIS AND TESTING,
WINDOW...........................8N-26
MOTOR - DISASSEMBLY, AXLE VACUUM . . 3-33,
3-65
MOTOR - INSTALLATION, AXLE VACUUM . . 3-33,
3-65
MOTOR - INSTALLATION, BLOWER......24-33
MOTOR - INSTALLATION, ENGINE
STARTER ...........................8F-41
MOTOR - OPERATION, AXLE VACUUM . 3-30,3-62
MOTOR - OPERATION, BLOWER.........24-32
MOTOR - OPERATION, ENGINE STARTER . . 8F-39
MOTOR - OPERATION, IDLE AIR
CONTROL..........................14-41
MOTOR - OPERATION, LUMBAR........8N-18
MOTOR - OPERATION, POWER LOCK.....8N-6
MOTOR - OPERATION, RECLINER.......8N-21
MOTOR - REMOVAL, AXLE VACUUM . . 3-33,3-65
MOTOR - REMOVAL, BLOWER..........24-33
MOTOR - REMOVAL, ENGINE STARTER . . . 8F-40
MOTOR - REMOVAL, WINDOW..........8N-26
MOTOR RELAY - DESCRIPTION,
BLOWER...........................24-22
MOTOR RELAY - DESCRIPTION, ENGINE
STARTER ...........................8F-42
MOTOR RELAY - DIAGNOSIS AND
TESTING, BLOWER...................24-22
MOTOR RELAY - INSTALLATION,
BLOWER...........................24-23
MOTOR RELAY - INSTALLATION, ENGINE
STARTER ...........................8F-43
MOTOR RELAY - OPERATION, BLOWER . . . 24-22
MOTOR RELAY - OPERATION, ENGINE
STARTER ...........................8F-42
MOTOR RELAY - REMOVAL, BLOWER....24-23
MOTOR RELAY - REMOVAL, ENGINE
STARTER ...........................8F-43
MOTOR RESISTOR BLOCK -
DESCRIPTION, BLOWER...............24-23
MOTOR RESISTOR BLOCK - DIAGNOSIS
AND TESTING, BLOWER...............24-24
MOTOR RESISTOR BLOCK -
INSTALLATION, BLOWER..............24-24
MOTOR RESISTOR BLOCK - OPERATION,
BLOWER...........................24-23
MOTOR RESISTOR BLOCK - REMOVAL,
BLOWER...........................24-24
MOTOR SWITCH - DESCRIPTION,
BLOWER...........................24-24
MOTOR SWITCH - DIAGNOSIS AND
TESTING, BLOWER...................24-25
MOTOR SWITCH - OPERATION, BLOWER . . 24-25
MOTOR SWITCH - REMOVAL, BLOWER
. . . 24-25
MOUNT - INSTALLATION, FRONT
. . . 9-100,9-156,
9-213,9-290,9-43
MOUNT - INSTALLATION, REAR
....9-101,9-158,
9-213,9-291,9-44
MOUNT - REMOVAL, FRONT
. 9-100,9-156,9-213,
9-290,9-43
MOUNT - REMOVAL, REAR
. . 9-101,9-157,9-213,
9-291,9-44
22 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................23-61
SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................13-9
SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................24-8
SPECIFICATIONS, TORQUE - FUEL
DELIVERY...........................14-4
SPECIFICATIONS, TORQUE - GAS FUEL
INJECTION..........................14-35
SPECIFICATIONS, TORQUE -
GENERATOR/CHARGING SYSTEM........8F-28
SPECIFICATIONS, TORQUE - IGNITION.....8I-2
SPECIFICATIONS, TORQUE - STARTING
SYSTEM............................8F-38
SPEED CONTROL - INSPECTION.........30-17
SPEED CONTROL SERVO - DESCRIPTION . . 8P-5
SPEED CONTROL SERVO -
INSTALLATION.......................8P-10
SPEED CONTROL SERVO - OPERATION....8P-5
SPEED CONTROL SERVO - REMOVAL.....8P-6
SPEED CONTROL SYSTEM -
DESCRIPTION........................8P-1
SPEED CONTROL SYSTEM - OPERATION . . . 8P-2
SPEED CONTROL SYSTEM - TORQUE.....8P-4
SPEED INPUT - DESCRIPTION, VEHICLE . . . 8P-1
SPEED SENSOR - DESCRIPTION . 21-253,21-424,
21-597,21-770
SPEED SENSOR - OPERATION . . . 21-253,21-424,
21-597,21-770
SPEEDOMETER - DESCRIPTION...........8J-30
SPEEDOMETER - OPERATION...........8J-30
SPLASH SHIELD - INSTALLATION, REAR . . 23-96
SPLASH SHIELD - REMOVAL, REAR......23-96
SPLASH SHIELDS - INSTALLATION,
FRONT END.........................23-92
SPLASH SHIELDS - REMOVAL, FRONT
END ...............................23-92
SPLICE LOCATIONS - DESCRIPTION . . . 8W-95-1
SPLICING - STANDARD PROCEDURE,
WIRE...........................8W-01-12
SPLIT BENCH - INSTALLATION, SEAT....23-134
SPLIT BENCH - INSTALLATION, SEAT
BACK.............................23-136
SPLIT BENCH - INSTALLATION, SEAT
BACK COVER.......................23-138
SPLIT BENCH - INSTALLATION, SEAT
CUSHION COVER....................23-140
SPLIT BENCH - INSTALLATION, SEAT
TRACK............................23-142
SPLIT BENCH - REMOVAL, SEAT.......23-134
SPLIT BENCH - REMOVAL, SEAT BACK . . 23-135
SPLIT BENCH - REMOVAL, SEAT BACK
COVER............................23-137
SPLIT BENCH - REMOVAL, SEAT
CUSHION COVER....................23-139
SPLIT BENCH - REMOVAL, SEAT TRACK . 23-142
SPOOL VALVE - INSTALLATION..........19-26
SPOOL VALVE - REMOVAL.............19-24
SPRING - DESCRIPTION........2-11,2-22,2-28
SPRING - INSTALLATION.......2-12,2-22,2-29
SPRING - OPERATION..........2-11,2-22,2-28
SPRING - REMOVAL...........2-11,2-22,2-28
SPRING AND SHOCK - DIAGNOSIS AND
TESTING............................2-26
SPRINGS - INSTALLATION, VALVES AND
VALVE .............................9-199
SPRINGS - REMOVAL, VALVES AND
VALVE .............................9-197
SPRINGS - STANDARD PROCEDURE,
VALVES, GUIDES.............9-138,9-25,9-82
SPRINGS, INTAKE/EXHAUST VALVES &
SEATS - STANDARD PROCEDURE-
VALVES,GUIDES.....................9-253
SPROCKETS - INSTALLATION, TIMING
BELT/CHAIN...........9-115,9-170,9-227,9-58
SPROCKETS - REMOVAL, TIMING
BELT/CHAIN...........9-114,9-170,9-226,9-57
SQUEAKS, RATTLES AND WIND NOISE -
INSPECTION........................30-15
STABILIZER BAR - DESCRIPTION . 2-12,2-22,2-30
STABILIZER BAR - INSTALLATION....2-12,2-23,
2-30
STABILIZER BAR - OPERATION
. . 2-12,2-22,2-30
STABILIZER BAR - REMOVAL
....2-12,2-22,2-30
STANCHION COVER - INSTALLATION
....23-143
STANCHION COVER - REMOVAL
........23-143
STANDARD CAB - INSTALLATION
........8O-19STANDARD CAB - REMOVAL...........8O-18
STARTER MOTOR - DESCRIPTION,
ENGINE............................8F-39
STARTER MOTOR - DIAGNOSIS AND
TESTING...........................8F-39
STARTER MOTOR - INSTALLATION,
ENGINE............................8F-41
STARTER MOTOR - OPERATION, ENGINE . . 8F-39
STARTER MOTOR - REMOVAL, ENGINE . . . 8F-40
STARTER MOTOR RELAY -
DESCRIPTION, ENGINE................8F-42
STARTER MOTOR RELAY -
INSTALLATION, ENGINE................8F-43
STARTER MOTOR RELAY - OPERATION,
ENGINE............................8F-42
STARTER MOTOR RELAY - REMOVAL,
ENGINE............................8F-43
STARTER RELAY - DIAGNOSIS AND
TESTING...........................8F-42
STARTING - DESCRIPTION.............8F-32
STARTING - OPERATION...............8F-32
STARTING - STANDARD PROCEDURE,
JUMP...............................0-27
STARTING SYSTEM - DIAGNOSIS AND
TESTING...........................8F-33
STARTING SYSTEM - SPECIFICATIONS,
TORQUE............................8F-38
STARTING SYSTEM, SPECIFICATIONS.....8F-38
STATE DISPLAY TEST MODE -
DESCRIPTION........................25-1
STATIONARY GLASS - DESCRIPTION....23-145
STATIONARY GLASS - OPERATION......23-145
STEERING - DESCRIPTION..............19-1
STEERING - OPERATION................19-1
STEERING AND HANDLING -
INSPECTION........................30-15
STEERING COLUMN OPENING COVER -
INSTALLATION......................23-116
STEERING COLUMN OPENING COVER -
REMOVAL.........................23-115
STEERING FLOW AND PRESSURE -
DIAGNOSIS AND TESTING, POWER.......19-4
STEERING GEAR HOUSING PLUG -
INSTALLATION.......................19-27
STEERING GEAR HOUSING PLUG -
REMOVAL..........................19-27
STEERING GEAR LEAKAGE - DIAGNOSIS
AND TESTING, POWER................19-14
STEERING GEAR, SPECIAL TOOLS -
POWER............................19-20
STEERING GEAR, SPECIFICATIONS -
POWER............................19-19
STEERING LINKAGE, SPECIAL TOOLS....19-39,
19-42
STEERING PUMP - INITIAL OPERATION -
STANDARD PROCEDURE, POWER.......19-31
STEERING PUMP, SPECIAL TOOLS -
POWER............................19-36
STEERING SYSTEM - DIAGNOSIS AND
TESTING, POWER.....................19-2
STEERING SYSTEM - STANDARD
PROCEDURE, FLUSHING POWER........19-32
STEERING WHEEL - INSTALLATION......19-13
STEERING WHEEL - REMOVAL..........19-13
STEM SEAL - INSTALLATION, VALVE.....9-198
STEM SEALS - REMOVAL, VALVE........9-197
STEPS - NEW VEHICLE PREPARATION
FORM, FINAL........................30-22
STOP LAMP - INSTALLATION, CENTER
HIGH MOUNTED......................8L-6
STOP LAMP - REMOVAL, CENTER HIGH
MOUNTED...........................8L-6
STOP LAMP UNIT - INSTALLATION,
CENTER HIGH MOUNTED...............8L-6
STOP LAMP UNIT - REMOVAL, CENTER
HIGH MOUNTED......................8L-6
STORAGE - DESCRIPTION, PRE
DELIVERY..........................30-19
STORAGE - STANDARD PROCEDURE,
PRE DELIVERY......................30-20
STORAGE BIN - INSTALLATION
.........23-116
STORAGE BIN - REMOVAL
............23-116
STOWAGE TRAY - INSTALLATION, REAR
FLOOR
............................23-121
STOWAGE TRAY - REMOVAL, REAR
FLOOR
............................23-121
STRAP - INSTALLATION, CAB-TO- BED
GROUND
...........................8A-14STRAP - INSTALLATION, ENGINE-TO-
BODY GROUND......................8A-13
STRAP - INSTALLATION, HEATER CORE
GROUND...........................8A-15
STRAP - REMOVAL, CAB-TO- BED
GROUND...........................8A-14
STRAP - REMOVAL, ENGINE-TO-BODY
GROUND...........................8A-13
STRAP - REMOVAL, HEATER CORE
GROUND...........................8A-14
STRETCH - INSPECTION, MEASURING
TIMING CHAIN........9-114,9-170,9-227,9-58
STRIKER - ADJUSTMENT, LATCH.......23-102
STRIKER - INSTALLATION, GLOVE BOX
LATCH ............................23-113
STRIKER - INSTALLATION, LATCH . 23-102,23-65,
23-73
STRIKER - LOWER - INSTALLATION,
LATCH .............................23-82
STRIKER - LOWER - REMOVAL, LATCH . . . 23-82
STRIKER - REMOVAL, GLOVE BOX
LATCH ............................23-113
STRIKER - REMOVAL, LATCH....23-102,23-65,
23-73
STRIKER - UPPER - INSTALLATION,
LATCH .............................23-82
STRIKER - UPPER - REMOVAL, LATCH . . . 23-82
STRIPE - INSTALLATION, TAPE..........23-88
STRIPE - REMOVAL, TAPE.............23-88
STRIPES AND DECALS - INSTALLATION,
BODY..............................23-87
STRIPES AND DECALS - REMOVAL,
BODY..............................23-87
STRUCTURAL ADHESIVE LOCATIONS,
SPECIFICATIONS.....................23-44
STUDS - INSTALLATION...............22-12
STUDS - REMOVAL...................22-12
SUCTION AND DISCHARGE LINE -
INSTALLATION.......................24-51
SUCTION AND DISCHARGE LINE -
REMOVAL..........................24-50
SUN VISOR - INSTALLATION..........23-127
SUN VISOR - REMOVAL..............23-127
SUPPLIES - DESCRIPTION, 5 VOLT......8E-17
SUPPLIES - OPERATION, 5 VOLT........8E-19
SUPPLY - DIAGNOSIS AND TESTING,
VACUUM............................8P-2
SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL..................14-56
SUPPORT - INSTALLATION, LUMBAR....23-133
SUPPORT - REMOVAL, LUMBAR.......23-133
SUPPORT BRACKET - INSTALLATION,
REARVIEW MIRROR.................23-126
SUPPORT PLATE - INSTALLATION........5-32
SUPPORT PLATE - REMOVAL............5-32
SUPPRESSION COMPONENTS -
DESCRIPTION, RADIO NOISE...........8A-12
SUPPRESSION COMPONENTS -
DIAGNOSIS AND TESTING, RADIO
NOISE.............................8A-12
SUSPENSION - STANDARD
PROCEDURES, ALIGNMENT LINK/COIL.....2-5
SUSPENSION, SPECIAL TOOLS -
INDEPENDENT FRONT...................2-9
SUSPENSION, SPECIAL TOOLS -
LINK/COIL...........................2-16
SUSPENSION-REAR, SPECIAL TOOLS.....2-28
SWITCH - DESCRIPTION
...............8P-12
SWITCH - DESCRIPTION, A/C HIGH
PRESSURE
.........................24-20
SWITCH - DESCRIPTION, A/C LOW
PRESSURE
.........................24-21
SWITCH - DESCRIPTION, BLOWER
MOTOR
............................24-24
SWITCH - DESCRIPTION, BRAKE LAMP
....8L-4
SWITCH - DESCRIPTION, CLUTCH
PEDAL POSITION
.....................6-22
SWITCH - DESCRIPTION, DOOR AJAR
....8L-34
SWITCH - DESCRIPTION, DOOR
CYLINDER LOCK
......................8N-5
SWITCH - DESCRIPTION, DRIVER
POWER SEAT
.......................8N-16
SWITCH - DESCRIPTION, DRIVER SEAT
HEATER
.............................8G-7
SWITCH - DESCRIPTION, HEADLAMP
....8L-18
SWITCH - DESCRIPTION, HORN
..........8H-4
SWITCH - DESCRIPTION, IGNITION
......19-11
BR/BEINDEX 33
Description Group-Page Description Group-Page Description Group-Page

TANK MODULE - DESCRIPTION, FUEL....14-78
TANK MODULE - INSTALLATION, FUEL....14-79
TANK MODULE - OPERATION, FUEL......14-78
TANK MODULE - REMOVAL, FUEL.......14-78
TAPE STRIPE - INSTALLATION..........23-88
TAPE STRIPE - REMOVAL..............23-88
TAPPETS - DIAGNOSIS AND TESTING,
HYDRAULIC............9-151,9-206,9-38,9-95
TASK MANAGER - DESCRIPTION........25-15
TASK MANAGER - OPERATION..........25-19
TEMP SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-48
TEMP SENSOR - DESCRIPTION,
AMBIENT..........................8M-11
TEMP SENSOR - INSTALLATION,
AMBIENT..........................8M-13
TEMP SENSOR - OPERATION, AMBIENT . . 8M-11
TEMP SENSOR - REMOVAL, AMBIENT . . . 8M-12
TEMPERATURE GAUGE - DESCRIPTION,
ENGINE............................8J-19
TEMPERATURE GAUGE - OPERATION,
ENGINE............................8J-19
TEMPERATURE SENSOR - DESCRIPTION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - DESCRIPTION,
FUEL..............................14-99
TEMPERATURE SENSOR - DESCRIPTION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - DIAGNOSIS &
TESTING, AMBIENT..................8M-12
TEMPERATURE SENSOR -
INSTALLATION, BATTERY..............8F-29
TEMPERATURE SENSOR - OPERATION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - OPERATION,
FUEL.............................14-100
TEMPERATURE SENSOR - OPERATION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - REMOVAL,
BATTERY...........................8F-29
TENSIONER - ADJUSTMENT, CABLE.......5-40
TENSIONER - DESCRIPTION, TIMING
BELT/CHAIN..........................9-57
TENSIONER - OPERATION, TIMING
BELT/CHAIN..........................9-57
TENSIONERS - 3.9L/5.2L/5.9L -
DESCRIPTION, BELT...................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
INSTALLATION, BELT...................7-20
TENSIONERS - 3.9L/5.2L/5.9L -
OPERATION, BELT.....................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
REMOVAL, BELT......................7-20
TENSIONERS - 5.9L DIESEL -
DESCRIPTION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
INSTALLATION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
OPERATION, BELT.....................7-23
TENSIONERS - 5.9L DIESEL - REMOVAL,
BELT ...............................7-23
TENSIONERS - 8.0L - DESCRIPTION,
BELT ...............................7-20
TENSIONERS - 8.0L - INSTALLATION,
BELT ...............................7-22
TENSIONERS - 8.0L - OPERATION, BELT . . . 7-20
TENSIONERS - 8.0L - REMOVAL, BELT.....7-21
TERMINAL - INSTALLATION.........8W-01-11
TERMINAL - REMOVAL.............8W-01-11
TEST - DIAGNOSIS AND TESTING, FUEL
INJECTOR.....................14-53,14-95
TEST - DIAGNOSIS AND TESTING, FUEL
PRESSURE LEAK DOWN
................14-2
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP AMPERAGE
....................14-10
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP CAPACITY
......................14-9
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP PRESSURE
....................14-10
TEST - DIAGNOSIS AND TESTING,
HYDRAULIC PRESSURE
. . 21-144,21-315,21-487,
21-658TEST - DIAGNOSIS AND TESTING,
POWR-LOKY........................3-161
TEST - DIAGNOSIS AND TESTING, ROAD . . . 8P-3
TEST - INSPECTION WINDSHIELD
WIPERS/WASHERS, ROAD.............30-18
TEST - STANDARD PROCEDURE,
BUILT-IN INDICATOR..................8F-11
TEST - STANDARD PROCEDURE,
HYDROMETER.......................8F-12
TEST - STANDARD PROCEDURE,
IGNITION-OFF DRAW..................8F-15
TEST - STANDARD PROCEDURE, LOAD . . . 8F-14
TEST - STANDARD PROCEDURE,
OPEN-CIRCUIT VOLTAGE...............8F-13
TEST - STANDARD PROCEDURE,
VERIFICATION........................8O-5
TEST INSPECTION - DESCRIPTION,
ROAD..............................30-15
TEST MODE - DESCRIPTION, CIRCUIT
ACTUATION..........................25-1
TEST MODE - DESCRIPTION, STATE
DISPLAY............................25-1
TETHER - INSTALLATION, CHILD.........8O-9
TETHER - REMOVAL, CHILD.............8O-9
THEFT SECURITY - DESCRIPTION,
VEHICLE............................8Q-1
THEFT SECURITY - OPERATION, VEHICLE . . 8Q-2
THEFT SECURITY SYSTEM - DIAGNOSIS
AND TESTING, VEHICLE................8Q-3
THERMOSTAT - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-50
THERMOSTAT - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-49
THERMOSTAT - 5.9L DIESEL -
DESCRIPTION, ENGINE COOLANT.........7-54
THERMOSTAT - 5.9L DIESEL -
INSTALLATION, ENGINE COOLANT........7-55
THERMOSTAT - 5.9L DIESEL -
OPERATION, ENGINE COOLANT..........7-54
THERMOSTAT - 5.9L DIESEL -
REMOVAL, ENGINE COOLANT............7-55
THERMOSTAT - 8.0L - DESCRIPTION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - INSTALLATION,
ENGINE COOLANT.....................7-53
THERMOSTAT - 8.0L - OPERATION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - REMOVAL,
ENGINE COOLANT.....................7-52
THERMOSTAT - DIAGNOSIS AND
TESTING....................7-49,7-52,7-54
THOMAS AND BETTS - INSTALLATION,
CONNECTOR.....................8W-01-10
THOMAS AND BETTS - REMOVAL,
CONNECTOR......................8W-01-9
THREAD REPAIR - STANDARD
PROCEDURE, ALUMINUM......21-159,21-330,
21-502,21-673
THREADED HOLE REPAIR -
DESCRIPTION......................Intro.-6
THREADS - STANDARD PROCEDURE,
REPAIR DAMAGED OR WORN . 9-11,9-125,9-181,
9-238,9-68
THROTTLE BODY - DESCRIPTION........14-48
THROTTLE BODY - OPERATION.........14-48
THROTTLE CONTROL CABLE -
INSTALLATION.................14-105,14-50
THROTTLE CONTROL CABLE -
REMOVAL....................14-104,14-50
THROTTLE POSITION SENSOR -
DESCRIPTION.......................14-51
THROTTLE POSITION SENSOR -
OPERATION.........................14-51
THROTTLE VALVE CABLE -
ADJUSTMENTS, TRANSMISSION
. 21-254,21-425,
21-598,21-771
THROTTLE VALVE CABLE -
DESCRIPTION
....21-253,21-424,21-597,21-770
TIMER MODULE - DESCRIPTION, BODY
CONTROL/CENTRAL
...................8E-1
TIMER MODULE - DIAGNOSIS AND
TESTING, CENTRAL
....................8E-4
TIMER MODULE - INSTALLATION, BODY
CONTROL/CENTRAL
...................8E-6TIMER MODULE - OPERATION, BODY
CONTROL/CENTRAL...................8E-3
TIMER MODULE - REMOVAL, BODY
CONTROL/CENTRAL...................8E-5
TIMING - DIAGNOSIS AND TESTING,
FUEL INJECTION PUMP...............14-66
TIMING BELT / CHAIN COVER(S) -
INSTALLATION........9-113,9-169,9-226,9-56
TIMING BELT / CHAIN COVER(S) -
REMOVAL............9-113,9-169,9-225,9-56
TIMING BELT/CHAIN AND SPROCKETS -
INSTALLATION........9-115,9-170,9-227,9-58
TIMING BELT/CHAIN AND SPROCKETS -
REMOVAL............9-114,9-170,9-226,9-57
TIMING BELT/CHAIN TENSIONER -
DESCRIPTION........................9-57
TIMING BELT/CHAIN TENSIONER -
OPERATION..........................9-57
TIMING CHAIN STRETCH - INSPECTION,
MEASURING..........9-114,9-170,9-227,9-58
TIMING, SPECIFICATIONS - IGNITION......8I-3
TIPS - CLEANING, APPEARANCE........30-21
TIRE - DESCRIPTION, SPARE............22-9
TIRE AND WHEEL BALANCE -
STANDARD PROCEDURES...............22-4
TIRE AND WHEEL RUNOUT - DIAGNOSIS
AND TESTING........................22-1
TIRE NOISE OR VIBRATION - DIAGNOSIS
AND TESTING........................22-8
TIRE PRESSURES - INSPECTION.........30-8
TIRE REVOLUTIONS PER MILE,
SPECIFICATIONS......................22-9
TIRE ROTATION - STANDARD
PROCEDURES........................22-2
TIRE WEAR PATTERNS - DIAGNOSIS
AND TESTING........................22-7
TIRE WINCH - INSTALLATION, SPARE....13-10
TIRE WINCH - REMOVAL, SPARE........13-10
TIRES - DESCRIPTION.............22-5,22-6
TO GROUND - STANDARD PROCEDURE,
TESTING FOR A SHORT.............8W-01-6
TO GROUND ON FUSES POWERING
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT....8W-01-7
TO OIL COOLER - INSTALLATION, AIR.....7-88
TO OIL COOLER - REMOVAL, AIR.........7-87
TO OIL COOLER - REMOVAL, WATER......7-87
TO USE WIRING DIAGRAMS -
DESCRIPTION, HOW................8W-01-1
TOOLS - 5.2L ENGINE, SPECIAL..........9-77
TOOLS - 5.9L DIESEL ENGINE, SPECIAL . . 9-244
TOOLS - 5.9L ENGINE, SPECIAL.........9-134
TOOLS - 8.0L ENGINE, SPECIAL.........9-188
TOOLS - AUDIO SYSTEMS, SPECIAL......8A-4
TOOLS - BASE BRAKES, SPECIAL.........5-4
TOOLS - COOLING, SPECIAL.............7-18
TOOLS - DIESEL FUEL SYSTEM,
SPECIAL...........................14-59
TOOLS - FRONT AXLE, SPECIAL..........3-58
TOOLS - FRONT AXLES, SPECIAL.........3-25
TOOLS - FUEL SYSTEM, SPECIAL . . . 14-36,14-4
TOOLS - HEADLAMP ALIGNMENT,
SPECIAL............................8L-4
TOOLS - INDEPENDENT FRONT
SUSPENSION, SPECIAL..................2-9
TOOLS - LINK/COIL SUSPENSION,
SPECIAL
............................2-16
TOOLS - NV5600 MANUAL
TRANSMISSION, SPECIAL
.............21-127
TOOLS - OVERHEAD CONSOLE
SYSTEMS, SPECIAL
...................8M-8
TOOLS - POWER DISTRIBUTION
SYSTEMS, SPECIAL
................8W-97-2
TOOLS - POWER STEERING GEAR,
SPECIAL
...........................19-20
TOOLS - POWER STEERING PUMP,
SPECIAL
...........................19-36
TOOLS - PROPELLER SHAFT, SPECIAL
......3-8
TOOLS - RE TRANSMISSION, SPECIAL
. . 21-534,
21-704
TOOLS - RE TRANSMISSIONS, SPECIAL
. 21-188,
21-359
TOOLS - STEERING LINKAGE, SPECIAL
. . . 19-39,
19-42
TOOLS - SUSPENSION-REAR, SPECIAL
....2-28
TOOLS, AIRBAG SYSTEM - SPECIAL
......8O-6
TOOLS, WIRING/TERMINAL - SPECIAL
. 8W-01-8
BR/BEINDEX 35
Description Group-Page Description Group-Page Description Group-Page