2001 DODGE RAM Valve

OIL SEAL - REAR - REMOVAL,
CRANKSHAFT.....9-149,9-206,9-278,9-35,9-92
OIL SEAL RETAINER - INSTALLATION,
CRANKSHAFT REAR.............9-206,9-279
OIL SEAL RETAINER - REMOVAL,
CRANKSHAFT REAR.............9-206,9-278
OIL SERVICE, OIL - STANDARD
PROCEDURE-ENGINE.................9-295
ON-BOARD DIAGNOSTICS (OBD) -
DIAGNOSIS AND TESTING...............7-4
ONE WAY CHECK VALVE - DESCRIPTION . . 25-30
ONE WAY CHECK VALVE - INSTALLATION . 25-30
ONE WAY CHECK VALVE - OPERATION....25-30
ONE WAY CHECK VALVE - REMOVAL.....25-30
ONE-WAY CHECK VALVE - DIAGNOSIS
AND TESTING.......................25-30
ON/OFF SWITCH - DESCRIPTION,
PASSENGER AIRBAG.................8O-23
ON/OFF SWITCH - INSTALLATION,
PASSENGER AIRBAG.................8O-25
ON/OFF SWITCH - OPERATION,
PASSENGER AIRBAG.................8O-24
ON/OFF SWITCH - REMOVAL,
PASSENGER AIRBAG.................8O-24
OPEN-CIRCUIT VOLTAGE TEST -
STANDARD PROCEDURE...............8F-13
OPENING COVER - INSTALLATION,
STEERING COLUMN.................23-116
OPENING COVER - REMOVAL, STEERING
COLUMN..........................23-115
OPENING DIMENSIONS, SPECIFICATIONS
- BODY............................23-60
OPENING SEAL - INSTALLATION, DOOR . . 23-153
OPENING SEAL - REMOVAL, DOOR.....23-153
OPENING UPPER TRIM - INSTALLATION,
GLOVE BOX........................23-114
OPENING UPPER TRIM - REMOVAL,
GLOVE BOX........................23-114
OPERATION, WIPERS/WASHERS.........8R-2
ORDER, 3.9L V-6 ENGINE - ENGINE
FIRING..............................8I-2
ORDER, 5.2L/5.9L V-8 ENGINES -
ENGINE FIRING.......................8I-2
ORDER, 8.0L V-10 ENGINE - SPARK
PLUG CABLE.........................8I-2
ORDER, DIESEL - FUEL INJECTOR
FIRING.............................14-58
ORIFICE TUBE - DESCRIPTION, A/C......24-53
ORIFICE TUBE - DIAGNOSIS AND
TESTING, FIXED.....................24-54
ORIFICE TUBE - OPERATION, A/C........24-53
ORIFICE TUBE - REMOVAL, A/C.........24-54
OTHER - INSPECTION.................30-15
OUT - STANDARD PROCEDURE, OWNER
CHECK.............................30-22
OUTBOARD IDENTIFICATION LAMP -
INSTALLATION.......................8L-29
OUTBOARD IDENTIFICATION LAMP -
REMOVAL..........................8L-28
OUTER BELT WEATHERSTRIP -
INSTALLATION, FRONT DOOR..........23-154
OUTER BELT WEATHERSTRIP -
REMOVAL, FRONT DOOR.............23-154
OUTLET - DESCRIPTION, CIGAR
LIGHTER.........................8W-97-2
OUTLET - DESCRIPTION, POWER......8W-97-9
OUTLET - DIAGNOSIS & TESTING,
POWER.........................8W-97-10
OUTLET - INSTALLATION, CIGAR
LIGHTER.........................8W-97-3
OUTLET - INSTALLATION, POWER
....8W-97-11
OUTLET - OPERATION, CIGAR LIGHTER
. 8W-97-2
OUTLET - OPERATION, POWER
......8W-97-10
OUTLET - REMOVAL, CIGAR LIGHTER
. . 8W-97-3
OUTLET - REMOVAL, POWER
........8W-97-10
OUTLET BARRELS - INSTALLATION,
PANEL
.............................24-32
OUTLET BARRELS - REMOVAL, PANEL
. . . 24-32
OUTPUT - DESCRIPTION, PCM
...........8I-3
OUTPUT - DIAGNOSIS AND TESTING,
VACUUM PUMP
.......................7-35
OUTPUT - OPERATION, PCM
............14-53
OUTPUT - OPERATION, PCM
.............8I-3
OUTPUT SHAFT FRONT BEARING -
INSTALLATION
....21-213,21-384,21-560,21-730
OUTPUT SHAFT FRONT BEARING -
REMOVAL
.......21-213,21-384,21-559,21-730OUTPUT SHAFT REAR BEARING -
INSTALLATION....21-213,21-384,21-560,21-731
OUTPUT SHAFT REAR BEARING -
REMOVAL.......21-213,21-384,21-560,21-731
OUTPUT SHAFT SEAL - INSTALLATION,
FRONT................21-852,21-886,21-922
OUTPUT SHAFT SEAL - REMOVAL,
FRONT................21-851,21-886,21-922
OVERDRIVE CLUTCH - DESCRIPTION . . . 21-214,
21-385,21-560,21-731
OVERDRIVE CLUTCH - OPERATION.....21-214,
21-385,21-560,21-731
OVERDRIVE ELECTRICAL CONTROLS -
DIAGNOSIS AND TESTING......21-215,21-386,
21-579,21-732
OVERDRIVE OFF INDICATOR -
DESCRIPTION.......................8J-27
OVERDRIVE OFF INDICATOR -
OPERATION.........................8J-27
OVERDRIVE OFF SWITCH -
DESCRIPTION......................21-215
OVERDRIVE OFF SWITCH -
INSTALLATION......................21-215
OVERDRIVE OFF SWITCH - OPERATION . . 21-215
OVERDRIVE OFF SWITCH - REMOVAL . . . 21-215
OVERDRIVE SWITCH - DESCRIPTION . . . 21-385,
21-578,21-732
OVERDRIVE SWITCH - INSTALLATION . . . 21-386,
21-579,21-733
OVERDRIVE SWITCH - OPERATION.....21-385,
21-579,21-732
OVERDRIVE SWITCH - REMOVAL......21-386,
21-579,21-733
OVERDRIVE UNIT - ASSEMBLY . . 21-225,21-395,
21-569,21-742
OVERDRIVE UNIT - CLEANING . . . 21-224,21-394,
21-568,21-741
OVERDRIVE UNIT - DISASSEMBLY.....21-217,
21-387,21-562,21-734
OVERDRIVE UNIT - INSPECTION . 21-224,21-394,
21-569,21-741
OVERDRIVE UNIT - INSTALLATION.....21-234,
21-404,21-577,21-750
OVERDRIVE UNIT - REMOVAL . . . 21-216,21-387,
21-560,21-733
OVERFLOW VALVE - DESCRIPTION......14-83
OVERFLOW VALVE - DIAGNOSIS AND
TESTING...........................14-84
OVERFLOW VALVE - INSTALLATION......14-85
OVERFLOW VALVE - OPERATION........14-83
OVERFLOW VALVE - REMOVAL..........14-84
OVERHEAD CONSOLE - DESCRIPTION....8M-1
OVERHEAD CONSOLE - INSTALLATION....8M-8
OVERHEAD CONSOLE - OVERHEAD
CONSOLE ASSEMBLY..................8M-7
OVERHEAD CONSOLE - OVERHEAD
CONSOLE DISASSEMBLY...............8M-7
OVERHEAD CONSOLE - REMOVAL........8M-6
OVERHEAD CONSOLE ASSEMBLY,
OVERHEAD CONSOLE.................8M-7
OVERHEAD CONSOLE DISASSEMBLY,
OVERHEAD CONSOLE.................8M-7
OVERHEAD CONSOLE SYSTEMS,
SPECIAL TOOLS......................8M-8
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON RETAINER -
ASSEMBLY.......21-236,21-406,21-581,21-752
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON RETAINER -
CLEANING.......21-236,21-406,21-580,21-752
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON RETAINER -
DESCRIPTION....21-235,21-405,21-580,21-751
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON RETAINER -
DISASSEMBLY....21-235,21-405,21-580,21-751
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON RETAINER -
INSPECTION
.....21-236,21-406,21-580,21-752
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON RETAINER -
OPERATION
......21-235,21-405,21-580,21-751
OVERTEMP INDICATOR - DESCRIPTION,
TRANSMISSION
......................8J-31
OVERTEMP INDICATOR - OPERATION,
TRANSMISSION
......................8J-31
OWNER CHECK OUT - STANDARD
PROCEDURE
........................30-22PAD - INSTALLATION, SILENCER.......23-103
PAD - REMOVAL, SILENCER...........23-103
PAINT CODE - DESCRIPTION..........23-129
PAINT COLOR CODES, SPECIFICATIONS -
2001 BR..........................23-129
PAINT TOUCH-UP - DESCRIPTION......23-129
PAN - CLEANING, OIL . 9-106,9-162,9-218,9-297,
9-49
PAN - INSPECTION, OIL.....9-106,9-162,9-219,
9-297,9-49
PAN - INSTALLATION, OIL . . . 9-106,9-162,9-219,
9-297,9-49
PAN - REMOVAL, OIL . . 9-105,9-161,9-218,9-296,
9-48
PANEL - INSTALLATION, QUARTER TRIM . 23-128
PANEL - INSTALLATION, TRIM.....23-74,23-84
PANEL - REMOVAL, QUARTER TRIM....23-127
PANEL - REMOVAL, TRIM.........23-74,23-84
PANEL ANTENNA CABLE -
INSTALLATION, INSTRUMENT...........8A-10
PANEL ANTENNA CABLE - REMOVAL,
INSTRUMENT........................8A-9
PANEL DEMISTER DUCTS - REMOVAL,
INSTRUMENT.......................24-37
PANEL DUCTS - REMOVAL,
INSTRUMENT.......................24-37
PANEL OUTLET BARRELS -
INSTALLATION.......................24-32
PANEL OUTLET BARRELS - REMOVAL....24-32
PANEL SPEAKER - INSTALLATION, REAR
CAB SIDE............................8A-21
PANEL SPEAKER - REMOVAL, REAR CAB
SIDE..............................8A-20
PANEL SYSTEM - DESCRIPTION,
INSTRUMENT......................23-104
PANEL SYSTEM - INSTALLATION,
INSTRUMENT......................23-107
PANEL SYSTEM - OPERATION,
INSTRUMENT......................23-105
PANEL SYSTEM - REMOVAL,
INSTRUMENT......................23-106
PANEL TOP COVER - INSTALLATION,
INSTRUMENT......................23-115
PANEL TOP COVER - REMOVAL,
INSTRUMENT......................23-114
PANEL TRIM - INSTALLATION, REAR
CLOSURE..........................23-121
PANEL TRIM - REMOVAL, REAR
CLOSURE..........................23-120
PANEL/DEFROST DOOR - INSTALLATION . . 24-39
PANEL/DEFROST DOOR - REMOVAL......24-38
PANEL/DEFROST DOOR ACTUATOR -
INSTALLATION.......................24-27
PANEL/DEFROST DOOR ACTUATOR -
REMOVAL..........................24-27
PARK BRAKE CABLE - 2500/3500 WITH
REAR DISC BRAKES - INSTALLATION,
REAR...............................5-38
PARK BRAKE CABLE - 2500/3500 WITH
REAR DISC BRAKES - REMOVAL,
REAR
...............................5-37
PARK BRAKE CABLE 2500/3500 SERIES
WITH DRUM BRAKES - INSTALLATION,
REAR
...............................5-39
PARK BRAKE CABLES - 1500 SERIES -
INSTALLATION, REAR
..................5-39
PARK BRAKE CABLES - 1500 SERIES -
REMOVAL, REAR
......................5-37
PARK BRAKE CABLES 2500/3500 SERIES
WITH DRUM BRAKES - REMOVAL,
REAR
...............................5-38
PARK BRAKE SHOES - 2500/3500 -
INSTALLATION, REAR DRUM IN HAT
......5-42
PARK BRAKE SHOES - 2500/3500 -
REMOVAL, REAR DRUM IN HAT
..........5-41
PARKING BRAKE - INSPECTION
.........30-17
PARKING BRAKE CABLE -
INSTALLATION, FRONT
.................5-39
PARKING BRAKE CABLE - REMOVAL,
FRONT
..............................5-37
PARK/NEUTRAL POSITION SWITCH -
DIAGNOSIS AND TESTING
......21-237,21-408,
21-583,21-755
PARK/NEUTRAL POSITION SWITCH -
INSTALLATION
....21-238,21-408,21-583,21-755
PARK/NEUTRAL POSITION SWITCH -
REMOVAL
.......21-238,21-408,21-583,21-755
24 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

PARK/TURN SIGNAL LAMP -
INSTALLATION.......................8L-29
PARK/TURN SIGNAL LAMP - REMOVAL . . . 8L-29
PARK/TURN SIGNAL LAMP UNIT -
INSTALLATION.......................8L-29
PARK/TURN SIGNAL LAMP UNIT -
REMOVAL..........................8L-29
PARTS - STANDARD PROCEDURES,
CLEANING FUEL SYSTEM..............14-57
PASSENGER AIRBAG - DESCRIPTION....8O-21
PASSENGER AIRBAG - INSTALLATION....8O-23
PASSENGER AIRBAG - OPERATION......8O-21
PASSENGER AIRBAG - REMOVAL........8O-21
PASSENGER AIRBAG ON/OFF SWITCH -
DESCRIPTION.......................8O-23
PASSENGER AIRBAG ON/OFF SWITCH -
INSTALLATION......................8O-25
PASSENGER AIRBAG ON/OFF SWITCH -
OPERATION.........................8O-24
PASSENGER AIRBAG ON/OFF SWITCH -
REMOVAL..........................8O-24
PASSENGER POWER SEAT SWITCH -
DESCRIPTION.......................8N-19
PASSENGER POWER SEAT SWITCH -
DIAGNOSIS & TESTING...............8N-19
PASSENGER POWER SEAT SWITCH -
INSTALLATION......................8N-20
PASSENGER POWER SEAT SWITCH -
OPERATION.........................8N-19
PASSENGER POWER SEAT SWITCH -
REMOVAL..........................8N-20
PASSENGER SEAT HEATER SWITCH -
DESCRIPTION.......................8G-13
PASSENGER SEAT HEATER SWITCH -
INSTALLATION......................8G-16
PASSENGER SEAT HEATER SWITCH -
OPERATION.........................8G-14
PASSENGER SEAT HEATER SWITCH -
REMOVAL..........................8G-15
PATTERNS - DIAGNOSIS AND TESTING,
TIRE WEAR..........................22-7
PCM - DESCRIPTION..................8E-14
PCM - GAS ENGINES - OPERATION......8E-17
PCM INPUT - OPERATION, ASD SENSE.....8I-3
PCM OUTPUT - DESCRIPTION............8I-3
PCM OUTPUT - OPERATION............14-53
PCM OUTPUT - OPERATION.............8I-3
PCV FILTER - DESCRIPTION............25-35
PCV VALVE - V-6/V-8 ENGINES -
DIAGNOSIS AND TESTING.............25-36
PEDAL - DESCRIPTION.................5-16
PEDAL - INSTALLATION............5-17,5-36
PEDAL - INSTALLATION, ACCELERATOR . . . 14-37
PEDAL - INSTALLATION, CLUTCH.........6-19
PEDAL - OPERATION...................5-16
PEDAL - REMOVAL................5-16,5-36
PEDAL - REMOVAL, ACCELERATOR......14-37
PEDAL - REMOVAL, CLUTCH............6-18
PEDAL POSITION SENSOR -
DESCRIPTION, ACCELERATOR..........14-91
PEDAL POSITION SENSOR -
INSTALLATION, ACCELERATOR..........14-93
PEDAL POSITION SENSOR - OPERATION,
ACCELERATOR.......................14-91
PEDAL POSITION SENSOR - REMOVAL,
ACCELERATOR.......................14-91
PEDAL POSITION SWITCH -
DESCRIPTION, CLUTCH.................6-22
PEDAL POSITION SWITCH - OPERATION,
CLUTCH.............................6-22
PER MILE, SPECIFICATIONS - TIRE
REVOLUTIONS........................22-9
PERFORMANCE - DIAGNOSIS AND
TESTING...............9-118,9-173,9-4,9-61
PERFORMANCE - DIAGNOSIS AND
TESTING, A/C........................24-2
PERFORMANCE - DIAGNOSIS AND
TESTING, HEATER.....................24-6
PERFORMANCE - INSPECTION, ENGINE . . . 30-16
PILOT BEARING - DESCRIPTION..........6-17
PILOT BEARING - INSTALLATION.........6-18
PILOT BEARING - OPERATION
...........6-18
PILOT BEARING - REMOVAL
.............6-18
PINION GEAR/RING GEAR -
INSTALLATION
....................3-42,3-74
PINION GEAR/RING GEAR - REMOVAL
. 3-40,3-72
PINION GEAR/RING GEAR/TONE RING -
INSTALLATION
........3-105,3-137,3-166,3-195PINION GEAR/RING GEAR/TONE RING -
REMOVAL...........3-103,3-135,3-165,3-193
PINION SEAL - INSTALLATION.....3-125,3-157,
3-185,3-34,3-66,3-95
PINION SEAL - REMOVAL . . . 3-125,3-156,3-185,
3-34,3-66,3-95
PIPE - 3.9L/5.2L/5.9L - INSPECTION,
EXHAUST............................11-7
PIPE - 3.9L/5.2L/5.9L - INSTALLATION,
EXHAUST............................11-7
PIPE - 3.9L/5.2L/5.9L - REMOVAL,
EXHAUST............................11-7
PIPE - 5.9L DIESEL - INSPECTION,
EXHAUST............................11-9
PIPE - 5.9L DIESEL - INSTALLATION,
EXHAUST...........................11-10
PIPE - 5.9L DIESEL - REMOVAL,
EXHAUST............................11-9
PIPE - 5.9L HEAVY DUTY/8.0L -
INSPECTION, EXHAUST.................11-9
PIPE - 5.9L HEAVY DUTY/8.0L -
INSTALLATION, EXHAUST...............11-9
PIPE - 5.9L HEAVY DUTY/8.0L -
REMOVAL, EXHAUST...................11-8
PISTON & CONNECTING ROD -
CLEANING........9-154,9-209,9-285,9-41,9-98
PISTON & CONNECTING ROD -
CONNECTING RODS..................9-286
PISTON & CONNECTING ROD -
DESCRIPTION.....9-153,9-208,9-282,9-40,9-97
PISTON & CONNECTING ROD -
INSPECTION......9-154,9-209,9-285,9-41,9-98
PISTON & CONNECTING ROD -
INSTALLATION......9-154,9-210,9-287,9-41,9-98
PISTON & CONNECTING ROD -
REMOVAL........9-154,9-209,9-285,9-40,9-97
PISTON FITTING - STANDARD
PROCEDURE...........9-153,9-208,9-40,9-97
PISTON GRADING - STANDARD
PROCEDURE........................9-282
PISTON RETAINER - ASSEMBLY,
OVERRUNNING CLUTCH CAM/
OVERDRIVE
......21-236,21-406,21-581,21-752
PISTON RETAINER - CLEANING,
OVERRUNNING CLUTCH CAM/
OVERDRIVE
......21-236,21-406,21-580,21-752
PISTON RETAINER - DESCRIPTION,
OVERRUNNING CLUTCH CAM/
OVERDRIVE
......21-235,21-405,21-580,21-751
PISTON RETAINER - DISASSEMBLY,
OVERRUNNING CLUTCH CAM/
OVERDRIVE
......21-235,21-405,21-580,21-751
PISTON RETAINER - INSPECTION,
OVERRUNNING CLUTCH CAM/
OVERDRIVE
......21-236,21-406,21-580,21-752
PISTON RETAINER - OPERATION,
OVERRUNNING CLUTCH CAM/
OVERDRIVE
......21-235,21-405,21-580,21-751
PISTON RING FITTING - STANDARD
PROCEDURE
................9-154,9-41,9-98
PISTON RINGS - STANDARD
PROCEDURE, FITTING
.................9-211
PISTON RINGS - STANDARD
PROCEDURE-PISTON RING FITTING
......9-288
PISTONS - DESCRIPTION
. 21-238,21-408,21-584,
21-755
PISTONS - OPERATION
. . 21-238,21-409,21-584,
21-755
PITMAN BEARING - INSTALLATION
......19-21
PITMAN BEARING - REMOVAL
..........19-20
PITMAN SHAFT - INSTALLATION
........19-23
PITMAN SHAFT - REMOVAL
............19-22
PITMAN SHAFT SEAL - INSTALLATION
....19-24
PITMAN SHAFT SEAL - REMOVAL
.......19-23
PLANETARY GEARTRAIN/OUTPUT
SHAFT - ASSEMBLY
.....21-241,21-412,21-588,
21-760
PLANETARY GEARTRAIN/OUTPUT
SHAFT - DESCRIPTION
. . . 21-240,21-410,21-585,
21-757
PLANETARY GEARTRAIN/OUTPUT
SHAFT - DISASSEMBLY
. . 21-240,21-411,21-586,
21-757
PLANETARY GEARTRAIN/OUTPUT
SHAFT - INSPECTION
....21-241,21-411,21-587,
21-760PLANETARY GEARTRAIN/OUTPUT
SHAFT - OPERATION....21-240,21-410,21-585,
21-757
PLATE - DESCRIPTION, BODY CODE....Intro.-1
PLATE - DESCRIPTION, ENGINE DATA....9-244
PLATE - DESCRIPTION, EQUIPMENT
IDENTIFICATION...................Intro.-12
PLATE - DESCRIPTION, PRESSURE.......6-15
PLATE - INSTALLATION, SUPPORT........5-32
PLATE - INSTALLATION, TRANSFER
CASE SKID.........................13-11
PLATE - OPERATION, PRESSURE.........6-16
PLATE - REMOVAL, SUPPORT...........5-32
PLATE - REMOVAL, TRANSFER CASE
SKID..............................13-11
PLATE LAMP - INSTALLATION, LICENSE . . 8L-22
PLATE LAMP - REMOVAL, LICENSE......8L-22
PLATE LAMP UNIT - INSTALLATION,
LICENSE...........................8L-22
PLATE LAMP UNIT - REMOVAL, LICENSE . . 8L-22
PLATE, SPECIFICATIONS - FUEL
INJECTION PUMP DATA...............14-73
PLATES - INSTALLATION, EXTERIOR
NAME.............................23-89
PLATES - REMOVAL, EXTERIOR NAME....23-89
PLUG - CLEANING, SPARK.............8I-19
PLUG - DESCRIPTION, SPARK...........8I-16
PLUG - INSTALLATION, SPARK..........8I-19
PLUG - INSTALLATION, STEERING GEAR
HOUSING............................19-27
PLUG - OPERATION, SPARK............8I-16
PLUG - REMOVAL, SPARK..............8I-18
PLUG - REMOVAL, STEERING GEAR
HOUSING...........................19-27
PLUG CABLE - DESCRIPTION, SPARK.....8I-19
PLUG CABLE - INSTALLATION, SPARK....8I-20
PLUG CABLE - OPERATION, SPARK.......8I-19
PLUG CABLE - REMOVAL, SPARK........8I-20
PLUG CABLE ORDER, 8.0L V-10 ENGINE
- SPARK .............................8I-2
PLUG CABLE RESISTANCE,
SPECIFICATIONS - SPARK...............8I-3
PLUG CABLES - DIAGNOSIS AND
TESTING, SPARK.....................8I-19
PLUG CONDITIONS - DIAGNOSIS AND
TESTING, SPARK.....................8I-16
PLUGS, SPECIFICATIONS - SPARK........8I-3
PLUMBING - CLEANING, CHARGE AIR
COOLER............................11-18
PLUMBING - DESCRIPTION............24-40
PLUMBING - DESCRIPTION, CHARGE
AIR COOLER........................11-17
PLUMBING - INSPECTION, CHARGE AIR
COOLER............................11-18
PLUMBING - INSTALLATION, CHARGE
AIR COOLER........................11-18
PLUMBING - OPERATION..............24-41
PLUMBING - OPERATION, CHARGE AIR
COOLER............................11-17
PLUMBING - REMOVAL, CHARGE AIR
COOLER............................11-17
POLISHING - DESCRIPTION, WET
SANDING/BUFFING..................23-130
PORT - DESCRIPTION, REFRIGERANT
SYSTEM SERVICE.....................24-1
PORT - OPERATION, REFRIGERANT
SYSTEM SERVICE.....................24-2
POSITION SENSOR - DESCRIPTION,
ACCELERATOR PEDAL.................14-91
POSITION SENSOR - DESCRIPTION,
THROTTLE..........................14-51
POSITION SENSOR - INSTALLATION,
ACCELERATOR PEDAL.................14-93
POSITION SENSOR - OPERATION,
ACCELERATOR PEDAL.................14-91
POSITION SENSOR - OPERATION,
THROTTLE..........................14-51
POSITION SENSOR - REMOVAL,
ACCELERATOR PEDAL
.................14-91
POSITION SWITCH - DESCRIPTION,
CLUTCH PEDAL
.......................6-22
POSITION SWITCH - DIAGNOSIS AND
TESTING, PARK/NEUTRAL
......21-237,21-408,
21-583,21-755
POSITION SWITCH - INSTALLATION,
PARK/NEUTRAL
. . . 21-238,21-408,21-583,21-755
POSITION SWITCH - OPERATION,
CLUTCH PEDAL
.......................6-22
BR/BEINDEX 25
Description Group-Page Description Group-Page Description Group-Page

POSITION SWITCH - REMOVAL,
PARK/NEUTRAL . . . 21-238,21-408,21-583,21-755
POSITIVE CABLE INSTALLATION,
GASOLINE..........................8F-23
POSITIVE CABLE REMOVAL, GASOLINE . . . 8F-23
POTENTIAL - STANDARD PROCEDURE,
TESTING FOR VOLTAGE.............8W-01-6
POWER BRAKE BOOSTER -
INSTALLATION........................5-20
POWER BRAKE BOOSTER - REMOVAL.....5-19
POWER DISTRIBUTION - DESCRIPTION . 8W-97-1
POWER DISTRIBUTION - OPERATION . . 8W-97-1
POWER DISTRIBUTION CENTER -
DESCRIPTION.....................8W-97-7
POWER DISTRIBUTION CENTER -
INSTALLATION....................8W-97-8
POWER DISTRIBUTION CENTER -
OPERATION.......................8W-97-8
POWER DISTRIBUTION CENTER -
REMOVAL........................8W-97-8
POWER DISTRIBUTION SYSTEMS,
SPECIAL TOOLS...................8W-97-2
POWER GROUNDS - DESCRIPTION......8E-17
POWER LOCK & REMOTE KEYLESS
ENTRY SYSTEM - DIAGNOSIS AND
TESTING............................8N-4
POWER LOCK MOTOR - DESCRIPTION....8N-6
POWER LOCK MOTOR - DIAGNOSIS AND
TESTING............................8N-7
POWER LOCK MOTOR - OPERATION......8N-6
POWER LOCK SWITCH - DESCRIPTION....8N-8
POWER LOCK SWITCH - DIAGNOSIS
AND TESTING........................8N-8
POWER LOCK SWITCH - OPERATION......8N-8
POWER LOCK SYSTEM - DESCRIPTION....8N-1
POWER LOCK SYSTEM - DIAGNOSIS
AND TESTING........................8N-4
POWER LOCK SYSTEM - OPERATION.....8N-3
POWER LUMBAR ADJUSTER -
DIAGNOSIS & TESTING...............8N-18
POWER MIRROR SWITCH -
DESCRIPTION.......................8N-12
POWER MIRROR SWITCH -
INSTALLATION......................8N-13
POWER MIRROR SWITCH - OPERATION . . 8N-12
POWER MIRROR SWITCH - REMOVAL . . . 8N-12
POWER MIRRORS - DESCRIPTION......8N-10
POWER MIRRORS - OPERATION........8N-10
POWER OUTLET - DESCRIPTION......8W-97-9
POWER OUTLET - DIAGNOSIS &
TESTING........................8W-97-10
POWER OUTLET - INSTALLATION....8W-97-11
POWER OUTLET - OPERATION
.......8W-97-10
POWER OUTLET - REMOVAL
........8W-97-10
POWER SEAT RECLINER - DIAGNOSIS &
TESTING
...........................8N-21
POWER SEAT SWITCH - DESCRIPTION,
DRIVER
............................8N-16
POWER SEAT SWITCH - DESCRIPTION,
PASSENGER
........................8N-19
POWER SEAT SWITCH - DIAGNOSIS &
TESTING, DRIVER
....................8N-16
POWER SEAT SWITCH - DIAGNOSIS &
TESTING, PASSENGER
................8N-19
POWER SEAT SWITCH - INSTALLATION,
DRIVER
............................8N-17
POWER SEAT SWITCH - INSTALLATION,
PASSENGER
........................8N-20
POWER SEAT SWITCH - OPERATION,
DRIVER
............................8N-16
POWER SEAT SWITCH - OPERATION,
PASSENGER
........................8N-19
POWER SEAT SWITCH - REMOVAL,
DRIVER
............................8N-17
POWER SEAT SWITCH - REMOVAL,
PASSENGER
........................8N-20
POWER SEAT SYSTEM - DESCRIPTION
. . . 8N-15
POWER SEAT SYSTEM - DIAGNOSIS &
TESTING
...........................8N-15
POWER SEAT SYSTEM - OPERATION
.....8N-15
POWER SEAT TRACK - DESCRIPTION
....8N-21
POWER SEAT TRACK - DIAGNOSIS &
TESTING
...........................8N-21
POWER SEAT TRACK - INSTALLATION
....8N-22
POWER SEAT TRACK - OPERATION
......8N-21
POWER SEAT TRACK - REMOVAL
.......8N-22POWER STEERING FLOW AND
PRESSURE - DIAGNOSIS AND
TESTING............................19-4
POWER STEERING GEAR LEAKAGE -
DIAGNOSIS AND TESTING.............19-14
POWER STEERING GEAR, SPECIAL
TOOLS.............................19-20
POWER STEERING GEAR,
SPECIFICATIONS.....................19-19
POWER STEERING PUMP - INITIAL
OPERATION - STANDARD PROCEDURE . . . 19-31
POWER STEERING PUMP, SPECIAL
TOOLS.............................19-36
POWER STEERING SYSTEM -
DIAGNOSIS AND TESTING..............19-2
POWER STEERING SYSTEM -
STANDARD PROCEDURE, FLUSHING.....19-32
POWER WINDOW SWITCH -
DESCRIPTION.......................8N-24
POWER WINDOW SWITCH - DIAGNOSIS
AND TESTING.......................8N-24
POWER WINDOW SWITCH -
INSTALLATION......................8N-26
POWER WINDOW SWITCH - OPERATION . . 8N-24
POWER WINDOW SWITCH - REMOVAL . . . 8N-25
POWER WINDOWS - DESCRIPTION......8N-23
POWER WINDOWS - DIAGNOSIS AND
TESTING...........................8N-23
POWER WINDOWS - OPERATION........8N-23
POWERING SEVERAL LOADS -
STANDARD PROCEDURE, TESTING
FOR SHORT TO GROUND ON FUSES . . . 8W-01-7
POWERTRAIN CONTROL MODULE -
INSTALLATION.......................8E-20
POWERTRAIN CONTROL MODULE -
REMOVAL..........................8E-19
POWR-LOK - ASSEMBLY, DIFFERENTIAL . . 3-163
POWR-LOK - DISASSEMBLY,
DIFFERENTIAL.......................3-161
POWR-LOKYTEST - DIAGNOSIS AND
TESTING...........................3-161
PRE DELIVERY STORAGE -
DESCRIPTION.......................30-19
PRE DELIVERY STORAGE - STANDARD
PROCEDURE........................30-20
PRE-ALIGNMENT - DIAGNOSIS AND
TESTING.............................2-2
PRECAUTIONS - CAUTION,
REFRIGERANT HOSES/LINES/TUBES......24-42
PRECAUTIONS AND WARNINGS, BODY -
SAFETY.............................23-1
PRECAUTIONS, COLUMN - SERVICE......19-6
PRELIMINARY - DIAGNOSIS AND
TESTING........21-143,21-314,21-486,21-657
PRELIMINARY CHECKS - DIAGNOSIS
AND TESTING.........................7-4
PREPARATION - DESCRIPTION, THE
IMPORTANCE OF CAREFUL NEW
VEHICLE............................30-1
PREPARATION FORM, FINAL STEPS -
NEW VEHICLE.......................30-22
PRESSURE - DESCRIPTION, HOSES......19-37
PRESSURE - DIAGNOSIS AND TESTING,
BOOST.............................14-89
PRESSURE - DIAGNOSIS AND TESTING,
CYLINDER COMPRESSION . 9-124,9-179,9-67,9-9
PRESSURE - DIAGNOSIS AND TESTING,
ENGINE OIL......9-104,9-160,9-215,9-295,9-47
PRESSURE - DIAGNOSIS AND TESTING,
FUEL TRANSFER PUMP...............14-80
PRESSURE - DIAGNOSIS AND TESTING,
POWER STEERING FLOW...............19-4
PRESSURE - GAS ENGINES -
SPECIFICATIONS, FUEL SYSTEM.........14-4
PRESSURE - OPERATION, HOSES........19-37
PRESSURE BLEEDING - STANDARD
PROCEDURE..........................5-8
PRESSURE CAP - CLEANING, RADIATOR . . . 7-66
PRESSURE CAP - DESCRIPTION,
RADIATOR
...........................7-65
PRESSURE CAP - INSPECTION,
RADIATOR
...........................7-66
PRESSURE CAP - OPERATION,
RADIATOR
...........................7-65
PRESSURE FUEL LINES - DESCRIPTION,
HIGH
..............................14-74
PRESSURE FUEL LINES - OPERATION,
HIGH
..............................14-74PRESSURE GAUGE - DESCRIPTION, OIL . . 8J-25
PRESSURE GAUGE - OPERATION, OIL....8J-26
PRESSURE GAUGES - DIAGNOSIS AND
TESTING............................22-7
PRESSURE LEAK DOWN TEST -
DIAGNOSIS AND TESTING, FUEL.........14-2
PRESSURE LEAKAGE - DIAGNOSIS AND
TESTING, CYLINDER COMBUSTION . 9-124,9-179,
9-67,9-9
PRESSURE PLATE - DESCRIPTION........6-15
PRESSURE PLATE - OPERATION..........6-16
PRESSURE RELEASE - STANDARD
PROCEDURE, FUEL SYSTEM.............14-3
PRESSURE RELIEF VALVE - CLEANING,
OIL................................9-297
PRESSURE RELIEF VALVE -
DESCRIPTION, HIGH..................24-46
PRESSURE RELIEF VALVE - INSPECTION,
OIL................................9-297
PRESSURE RELIEF VALVE -
INSTALLATION, OIL...................9-298
PRESSURE RELIEF VALVE - OPERATION,
HIGH..............................24-46
PRESSURE RELIEF VALVE - REMOVAL,
OIL................................9-297
PRESSURE SENSOR/SWITCH -
DESCRIPTION, OIL...............9-298,9-49
PRESSURE SENSOR/SWITCH -
INSTALLATION, OIL...................9-299
PRESSURE SENSOR/SWITCH -
OPERATION, OIL.................9-298,9-49
PRESSURE SENSOR/SWITCH -
REMOVAL, OIL........................9-298
PRESSURE SWITCH - DESCRIPTION, A/C
HIGH..............................24-20
PRESSURE SWITCH - DESCRIPTION, A/C
LOW ..............................24-21
PRESSURE SWITCH - DIAGNOSIS AND
TESTING, A/C HIGH...................24-20
PRESSURE SWITCH - DIAGNOSIS AND
TESTING, A/C LOW...................24-21
PRESSURE SWITCH - INSTALLATION,
A/C HIGH...........................24-21
PRESSURE SWITCH - INSTALLATION,
A/C LOW ...........................24-22
PRESSURE SWITCH - OPERATION, A/C
HIGH..............................24-20
PRESSURE SWITCH - OPERATION, A/C
LOW ..............................24-21
PRESSURE SWITCH - REMOVAL, A/C
HIGH..............................24-21
PRESSURE SWITCH - REMOVAL, A/C
LOW ..............................24-21
PRESSURE TEST - DIAGNOSIS AND
TESTING, FUEL PUMP.................14-10
PRESSURE TEST - DIAGNOSIS AND
TESTING, HYDRAULIC . . . 21-144,21-315,21-487,
21-658
PRESSURES - INSPECTION, TIRE.........30-8
PRESSURES, DIESEL ENGINES - FUEL
SYSTEM
............................14-58
PROCEDURE-CONNECTING ROD
BEARING FITTING, CONNECTING ROD
BEARINGS - STANDARD
................9-31
PROCEDURE-CYLINDER BLOCK
REFACING, ENGINE BLOCK -
STANDARD
.........................9-263
PROCEDURE-CYLINDER BORE,
DE-GLAZE - STANDARD
...............9-264
PROCEDURE-ENGINE OIL LEVEL, OIL -
STANDARD
.........................9-295
PROCEDURE-ENGINE OIL SERVICE, OIL -
STANDARD
.........................9-295
PROCEDURE-PISTON RING FITTING,
PISTON RINGS - STANDARD
...........9-288
PROCEDURE-VALVES,GUIDES AND
SPRINGS, INTAKE/EXHAUST VALVES &
SEATS - STANDARD
..................9-253
PROGRAMMABLE ELECTRONIC
FEATURES - DESCRIPTION
.............30-20
PROGRAMMABLE ELECTRONIC
FEATURES - OPERATION
...............30-20
PROGRAMMING - STANDARD
PROCEDURE, RKE TRANSMITTER
........8N-8
PROPELLER SHAFT - DESCRIPTION
........3-1
PROPELLER SHAFT - DIAGNOSIS AND
TESTING
.............................3-3
26 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

RELAY - OPERATION, A/C COMPRESSOR
CLUTCH............................24-17
RELAY - OPERATION, BLOWER MOTOR . . . 24-22
RELAY - OPERATION, ENGINE STARTER
MOTOR............................8F-42
RELAY - OPERATION, FUEL HEATER......14-63
RELAY - OPERATION, FUEL INJECTION
PUMP.............................14-99
RELAY - OPERATION, FUEL PUMP.......14-41
RELAY - OPERATION, HEADLAMP........8L-17
RELAY - OPERATION, HEATED SEAT.....8G-12
RELAY - OPERATION, HORN.............8H-3
RELAY - OPERATION, INTAKE AIR
HEATER ...........................14-102
RELAY - OPERATION, RADIO CHOKE......8A-8
RELAY - OPERATION, WIPER...........8R-15
RELAY - REMOVAL, A/C COMPRESSOR
CLUTCH............................24-18
RELAY - REMOVAL, AUTOMATIC SHUT
DOWN..............................8I-4
RELAY - REMOVAL, BLOWER MOTOR....24-23
RELAY - REMOVAL, ENGINE STARTER
MOTOR............................8F-43
RELAY - REMOVAL, FUEL HEATER.......14-65
RELAY - REMOVAL, FUEL PUMP........14-41
RELAY - REMOVAL, HEADLAMP.........8L-18
RELAY - REMOVAL, HEATED SEAT.......8G-13
RELAY - REMOVAL, INTAKE AIR HEATER . 14-102
RELAY - REMOVAL, RADIO CHOKE.........8A-9
RELAY - REMOVAL, WIPER............8R-17
RELAYS - DIAGNOSIS AND TESTING,
ASD AND FUEL PUMP..................8I-3
RELEASE - INSTALLATION..............5-41
RELEASE - REMOVAL..................5-40
RELEASE - STANDARD PROCEDURE,
FUEL SYSTEM PRESSURE..............14-3
RELEASE BEARING - DESCRIPTION,
CLUTCH.............................6-14
RELEASE BEARING - INSTALLATION,
CLUTCH.............................6-15
RELEASE BEARING - OPERATION,
CLUTCH.............................6-14
RELEASE BEARING - REMOVAL, CLUTCH . . . 6-15
RELEASE CABLE - INSTALLATION........23-83
RELEASE CABLE - INSTALLATION, LATCH . 23-101
RELEASE CABLE - REMOVAL...........23-82
RELEASE CABLE - REMOVAL, LATCH....23-101
RELIEF VALVE - CLEANING, OIL
PRESSURE.........................9-297
RELIEF VALVE - DESCRIPTION, HIGH
PRESSURE.........................24-46
RELIEF VALVE - INSPECTION, OIL
PRESSURE.........................9-297
RELIEF VALVE - INSTALLATION, OIL
PRESSURE.........................9-298
RELIEF VALVE - OPERATION, HIGH
PRESSURE.........................24-46
RELIEF VALVE - REMOVAL, OIL
PRESSURE.........................9-297
REMINDER - INSPECTION, TRIP
COMPUTER/MAINTENANCE.............30-17
REMINDER INDICATOR - DESCRIPTION,
SERVICE...........................8J-28
REMINDER INDICATOR - OPERATION,
SERVICE...........................8J-28
REMOTE KEYLESS ENTRY SYSTEM -
DESCRIPTION........................8N-2
REMOTE KEYLESS ENTRY SYSTEM -
DIAGNOSIS AND TESTING, POWER
LOCK...............................8N-4
REMOTE KEYLESS ENTRY SYSTEM -
OPERATION..........................8N-3
REMOTE KEYLESS ENTRY
TRANSMITTER - DESCRIPTION..........8N-7
REMOTE KEYLESS ENTRY
TRANSMITTER - DIAGNOSIS AND
TESTING............................8N-7
REMOTE KEYLESS ENTRY
TRANSMITTER - OPERATION............8N-7
REMOTE SWITCHES - DESCRIPTION.....8A-15
REMOTE SWITCHES - DIAGNOSIS AND
TESTING
...........................8A-16
REMOTE SWITCHES - OPERATION
.......8A-15
REMOVAL/INSTALLATION, FUEL FILLER
CAP
...............................25-33
REMOVAL/INSTALLATION, FUEL HEATER
. . 14-63
REPAIR - DESCRIPTION, THREADED
HOLE
.............................Intro.-6REPAIR - STANDARD PROCEDURE,
ALUMINUM THREAD....21-159,21-330,21-502,
21-673
REPAIR - STANDARD PROCEDURE, CAM
BORE..............................9-267
REPAIR - STANDARD PROCEDURE,
CYLINDER BORE.....................9-265
REPAIR DAMAGED OR WORN THREADS
- STANDARD PROCEDURE....9-11,9-125,9-181,
9-238,9-68
REPAIRING LEAKS - STANDARD
PROCEDURES........................22-8
REQUIREMENTS - DESCRIPTION,
COOLING SYSTEM....................24-1
REQUIREMENTS - DIESEL ENGINE -
DESCRIPTION, FUEL....................0-2
REQUIREMENTS - GAS ENGINES -
DESCRIPTION, FUEL....................0-1
RESERVOIR - DESCRIPTION, VACUUM....24-29
RESERVOIR - DESCRIPTION, VACUUM . . . 8P-13
RESERVOIR - DESCRIPTION, WASHER . . . 8R-10
RESERVOIR - INSTALLATION, FLUID......5-15
RESERVOIR - INSTALLATION, VACUUM . . . 24-30
RESERVOIR - INSTALLATION, VACUUM . . . 8P-14
RESERVOIR - INSTALLATION, WASHER . . . 8R-11
RESERVOIR - OPERATION, VACUUM.....24-29
RESERVOIR - OPERATION, WASHER.....8R-10
RESERVOIR - REMOVAL, FLUID..........5-15
RESERVOIR - REMOVAL, VACUUM.......24-30
RESERVOIR - REMOVAL, VACUUM.......8P-13
RESERVOIR - REMOVAL, WASHER......8R-10
RESISTANCE, 3.9L/5.2L/5.9L ENGINES -
IGNITION COIL........................8I-3
RESISTANCE, 8.0L V-10 ENGINE -
IGNITION COIL........................8I-3
RESISTANCE, SPECIFICATIONS - SPARK
PLUG CABLE.........................8I-3
RESISTOR BLOCK - DESCRIPTION,
BLOWER MOTOR....................24-23
RESISTOR BLOCK - DIAGNOSIS AND
TESTING, BLOWER MOTOR
............24-24
RESISTOR BLOCK - INSTALLATION,
BLOWER MOTOR
....................24-24
RESISTOR BLOCK - OPERATION,
BLOWER MOTOR
....................24-23
RESISTOR BLOCK - REMOVAL, BLOWER
MOTOR
............................24-24
RESONATOR - INSTALLATION
...........11-13
RESONATOR - REMOVAL
..............11-13
RESTRAINTS - DESCRIPTION
............8O-1
RESTRAINTS - INSPECTION, SEAT
BELTS, SHOULDER BELTS,
RETRACTORS AND HEAD
..............30-12
RESTRAINTS - OPERATION
.............8O-2
RESTRAINTS - WARNING
...............8O-3
RESTRICTIONS - DIAGNOSIS AND
TESTING, FUEL SUPPLY
...............14-56
RETAINER - ASSEMBLY, OVERRUNNING
CLUTCH CAM/OVERDRIVE PISTON
.....21-236,
21-406,21-581,21-752
RETAINER - CLEANING, OVERRUNNING
CLUTCH CAM/OVERDRIVE PISTON
.....21-236,
21-406,21-580,21-752
RETAINER - DESCRIPTION,
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON
.....21-235,21-405,21-580,
21-751
RETAINER - DISASSEMBLY,
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON
.....21-235,21-405,21-580,
21-751
RETAINER - INSPECTION,
OVERRUNNING CLUTCH CAM/
OVERDRIVE PISTON
.....21-236,21-406,21-580,
21-752
RETAINER - INSTALLATION,
CRANKSHAFT REAR OIL SEAL
.....9-206,9-279
RETAINER - OPERATION, OVERRUNNING
CLUTCH CAM/OVERDRIVE PISTON
.....21-235,
21-405,21-580,21-751
RETAINER - REMOVAL, CRANKSHAFT
REAR OIL SEAL
.................9-206,9-278
RETRACTOR - INSTALLATION, REAR
SEAT BELT
.........................8O-26
RETRACTOR - REMOVAL, REAR SEAT
BELT
..............................8O-26RETRACTORS AND HEAD RESTRAINTS -
INSPECTION, SEAT BELTS, SHOULDER
BELTS .............................30-12
RETURN - DESCRIPTION, HOSES........19-37
RETURN - DESCRIPTION, SENSOR.......8E-17
RETURN - OPERATION, HOSES..........19-37
REVOLUTIONS PER MILE,
SPECIFICATIONS - TIRE................22-9
RIGHT FRONT FENDER - INSTALLATION . . 23-94
RIGHT FRONT FENDER - REMOVAL......23-94
RING - INSTALLATION, PINION
GEAR/RING GEAR/TONE.....3-105,3-137,3-166,
3-195
RING - REMOVAL, PINION GEAR/RING
GEAR/TONE..........3-103,3-135,3-165,3-193
RING FITTING - STANDARD
PROCEDURE, PISTON.........9-154,9-41,9-98
RING FITTING, PISTON RINGS -
STANDARD PROCEDURE-PISTON........9-288
RINGS - STANDARD PROCEDURE,
FITTING PISTON.....................9-211
RINGS - STANDARD PROCEDURE-
PISTON RING FITTING, PISTON.........9-288
RISER - INSTALLATION, SEAT..........23-141
RISER - REMOVAL, SEAT.............23-141
RKE TRANSMITTER BATTERIES -
STANDARD PROCEDURE...............8N-8
RKE TRANSMITTER PROGRAMMING -
STANDARD PROCEDURE...............8N-8
ROAD TEST - DIAGNOSIS AND TESTING . . . 8P-3
ROAD TEST - INSPECTION WINDSHIELD
WIPERS/WASHERS....................30-18
ROAD TEST INSPECTION - DESCRIPTION . 30-15
ROAD TESTING - DIAGNOSIS AND
TESTING........21-143,21-314,21-486,21-657
ROCKER ARM / ADJUSTER ASSEMBLY -
INSTALLATION........................9-85
ROCKER ARM / ADJUSTER ASSEMBLY -
REMOVAL...........................9-85
ROCKER ARM / ADJUSTER ASSY -
CLEANING..........................9-262
ROCKER ARM / ADJUSTER ASSY -
DESCRIPTION.......................9-261
ROCKER ARM / ADJUSTER ASSY -
INSPECTION........................9-262
ROCKER ARM / ADJUSTER ASSY -
INSTALLATION.............9-142,9-200,9-263
ROCKER ARM / ADJUSTER ASSY -
REMOVAL................9-142,9-200,9-261
ROD - CLEANING, PISTON &
CONNECTING.....9-154,9-209,9-285,9-41,9-98
ROD - CONNECTING RODS, PISTON &
CONNECTING........................9-286
ROD - DESCRIPTION, PISTON &
CONNECTING.....9-153,9-208,9-282,9-40,9-97
ROD - INSPECTION, PISTON &
CONNECTING.....9-154,9-209,9-285,9-41,9-98
ROD - INSTALLATION, PISTON &
CONNECTING.....9-154,9-210,9-287,9-41,9-98
ROD - REMOVAL, PISTON &
CONNECTING.....9-154,9-209,9-285,9-40,9-97
ROD BEARING AND CRANKSHAFT
JOURNAL CLEARANCE - STANDARD
PROCEDURE, CONNECTING............9-274
ROD BEARING FITTING - STANDARD
PROCEDURE, CONNECTING . . . 9-144,9-202,9-88
ROD BEARING FITTING, CONNECTING
ROD BEARINGS - STANDARD
PROCEDURE-CONNECTING
..............9-31
ROD BEARINGS - STANDARD
PROCEDURE-CONNECTING ROD
BEARING FITTING, CONNECTING
.........9-31
RODS, PISTON & CONNECTING ROD -
CONNECTING
........................9-286
ROLLOVER VALVE - DESCRIPTION
.......14-25
ROLLOVER VALVE - INSTALLATION
......14-27
ROLLOVER VALVE - REMOVAL
..........14-26
ROOF JOINT MOLDING - INSTALLATION
. . 23-91
ROOF JOINT MOLDING - REMOVAL
......23-91
ROTATION - STANDARD PROCEDURES,
TIRE
................................22-2
ROTOR - DIAGNOSIS AND TESTING,
DISC BRAKE
.........................5-20
ROTOR - DIAGNOSIS AND TESTING,
DISTRIBUTOR
.......................8I-13
RUN CHANNEL - INSTALLATION, GLASS
. . 23-70
RUN CHANNEL - REMOVAL, GLASS
......23-70
BR/BEINDEX 29
Description Group-Page Description Group-Page Description Group-Page

RUN WEATHERSTRIP - INSTALLATION,
FRONT DOOR GLASS................23-154
RUN WEATHERSTRIP - REMOVAL,
FRONT DOOR GLASS................23-153
RUNNING LAMP MODULE -
DESCRIPTION, DAYTIME................8L-9
RUNNING LAMP MODULE -
INSTALLATION, DAYTIME...............8L-9
RUNNING LAMP MODULE - OPERATION,
DAYTIME............................8L-9
RUNNING LAMP MODULE - REMOVAL,
DAYTIME............................8L-9
RUNOUT - DIAGNOSIS AND TESTING,
TIRE AND WHEEL.....................22-1
SAFETY CERTIFICATION LABEL -
DESCRIPTION, VEHICLE.............Intro.-12
SAFETY LATCH - INSTALLATION........23-102
SAFETY LATCH - REMOVAL...........23-102
SAFETY PRECAUTIONS AND WARNINGS,
BODY...............................23-1
SAFETY SWITCH - INSPECTION,
NEUTRAL...........................30-19
SANDING/BUFFING & POLISHING -
DESCRIPTION, WET.................23-130
SCHEDULE (8.0L 2500 & 3500 MODELS
- CALIFORNIA ONLY) - DESCRIPTION,
MEDIUM DUTY TRUCK MAINTENANCE.....0-13
SCHEDULES - 24-VALVE CUMMINS
TURBO DIESEL - DESCRIPTION,
MAINTENANCE.......................0-22
SCHEDULES - DESCRIPTION, HEAVY
DUTY ENGINE (FEDERAL ONLY - 2500
8.0L HD AND 3500 5.9L& 8.0L
MODELS) MAINTENANCE...............0-17
SCHEDULES - LIGHT DUTY ENGINE
(1500 AND 2500 MODELS EXCEPT
8.0L) MAINTENANCE SCHEDULES,
MAINTENANCE........................0-7
SCHEDULES, MAINTENANCE
SCHEDULES - LIGHT DUTY ENGINE
(1500 AND 2500 MODELS EXCEPT
8.0L) MAINTENANCE....................0-7
SCHEMATICS - DIAGNOSIS AND
TESTING, VACUUM...................25-37
SCHEMATICS AND DIAGRAMS -
HYDRAULIC SCHEMATICS......21-174,21-345,
21-520,21-690
SCHEMATICS, SCHEMATICS AND
DIAGRAMS - HYDRAULIC......21-174,21-345,
21-520,21-690
SEAL - DIAGNOSIS AND TESTING,
RADIATOR CAP-TO-FILLER NECK.........7-66
SEAL - FRONT - DESCRIPTION,
CRANKSHAFT OIL............9-147,9-34,9-91
SEAL - FRONT - INSTALLATION,
CRANKSHAFT OIL.......9-148,9-277,9-34,9-91
SEAL - FRONT - OPERATION,
CRANKSHAFT OIL............9-147,9-34,9-91
SEAL - FRONT - REMOVAL,
CRANKSHAFT OIL.......9-147,9-276,9-34,9-91
SEAL - FRONT COVER INSTALLED -
INSTALLATION, FRONT OIL.............9-205
SEAL - FRONT COVER INSTALLED -
REMOVAL, FRONT OIL................9-204
SEAL - FRONT COVER REMOVED -
INSTALLATION, FRONT OIL
.............9-205
SEAL - FRONT COVER REMOVED -
REMOVAL, FRONT OIL
................9-204
SEAL - INSTALLATION, ADAPTER
HOUSING
.....................21-132,21-87
SEAL - INSTALLATION, B-PILLAR DOOR
. 23-152
SEAL - INSTALLATION, DOOR OPENING
. . 23-153
SEAL - INSTALLATION, EXTENSION
HOUSING
. 21-132,21-198,21-369,21-544,21-715,
21-87
SEAL - INSTALLATION, EXTENSION
HOUSING BUSHING
......21-850,21-885,21-921
SEAL - INSTALLATION, FRONT DOOR
UPPER CORNER
....................23-154
SEAL - INSTALLATION, FRONT OUTPUT
SHAFT
................21-852,21-886,21-922
SEAL - INSTALLATION, PINION
....3-125,3-157,
3-185,3-34,3-66,3-95
SEAL - INSTALLATION, PITMAN SHAFT
. . . 19-24
SEAL - INSTALLATION, VALVE STEM
.....9-198
SEAL - REAR - DESCRIPTION,
CRANKSHAFT OIL
............9-148,9-34,9-91SEAL - REAR - INSTALLATION,
CRANKSHAFT OIL . . 9-149,9-206,9-278,9-35,9-92
SEAL - REAR - OPERATION,
CRANKSHAFT OIL............9-148,9-34,9-92
SEAL - REAR - REMOVAL, CRANKSHAFT
OIL .............9-149,9-206,9-278,9-35,9-92
SEAL - REMOVAL, ADAPTER HOUSING . . 21-132,
21-87
SEAL - REMOVAL, B-PILLAR DOOR.....23-152
SEAL - REMOVAL, DOOR OPENING.....23-153
SEAL - REMOVAL, EXTENSION
HOUSING . 21-132,21-198,21-369,21-544,21-714,
21-87
SEAL - REMOVAL, EXTENSION HOUSING
BUSHING..............21-850,21-885,21-921
SEAL - REMOVAL, FRONT DOOR UPPER
CORNER..........................23-154
SEAL - REMOVAL, FRONT OUTPUT
SHAFT................21-851,21-886,21-922
SEAL - REMOVAL, PINION . . . 3-125,3-156,3-185,
3-34,3-66,3-95
SEAL - REMOVAL, PITMAN SHAFT.......19-23
SEAL AREA LEAKS - DIAGNOSIS AND
TESTING, REAR.......................9-10
SEAL RETAINER - INSTALLATION,
CRANKSHAFT REAR OIL..........9-206,9-279
SEAL RETAINER - REMOVAL,
CRANKSHAFT REAR OIL..........9-206,9-278
SEALER LOCATIONS, SPECIFICATIONS -
BODY..............................23-47
SEALERS - STANDARD PROCEDURE,
FORM-IN-PLACE GASKETS....9-11,9-125,9-180,
9-237,9-68
SEALING - INSPECTION, BODY..........30-10
SEALS - INSTALLATION, AXLE SHAFT . 3-29,3-61,
3-94
SEALS - REMOVAL, AXLE SHAFT . 3-29,3-61,3-94
SEALS - REMOVAL, VALVE STEM........9-197
SEAT - BENCH SEAT - INSTALLATION....23-133
SEAT - BENCH SEAT - REMOVAL.......23-133
SEAT - INSTALLATION, REAR..........23-144
SEAT - INSTALLATION, SEAT - BENCH . . . 23-133
SEAT - INSTALLATION, SEAT BACK -
BENCH............................23-135
SEAT - REMOVAL, REAR..............23-144
SEAT - REMOVAL, SEAT - BENCH.......23-133
SEAT - REMOVAL, SEAT BACK - BENCH . . 23-135
SEAT - SPLIT BENCH - INSTALLATION . . . 23-134
SEAT - SPLIT BENCH - REMOVAL.......23-134
SEAT ARMREST/CONSOLE -
INSTALLATION, CENTER..............23-132
SEAT ARMREST/CONSOLE - REMOVAL,
CENTER...........................23-132
SEAT ARMREST/LATCH COVER -
INSTALLATION, CENTER..............23-132
SEAT ARMREST/LATCH COVER -
REMOVAL, CENTER..................23-132
SEAT BACK - BENCH SEAT -
INSTALLATION......................23-135
SEAT BACK - BENCH SEAT - REMOVAL . . 23-135
SEAT BACK - SPLIT BENCH -
INSTALLATION......................23-136
SEAT BACK - SPLIT BENCH - REMOVAL . . 23-135
SEAT BACK COVER - INSTALLATION.....23-137
SEAT BACK COVER - REMOVAL........23-137
SEAT BACK COVER - SPLIT BENCH -
INSTALLATION......................23-138
SEAT BACK COVER - SPLIT BENCH -
REMOVAL
.........................23-137
SEAT BACK RECLINER - INSTALLATION
. . 23-138
SEAT BACK RECLINER - REMOVAL
......23-138
SEAT BELT & RETRACTOR -
INSTALLATION, REAR
.................8O-26
SEAT BELT & RETRACTOR - REMOVAL,
REAR
..............................8O-26
SEAT BELT BUCKLE - INSTALLATION,
FRONT
.............................8O-20
SEAT BELT BUCKLE - INSTALLATION,
REAR
..............................8O-27
SEAT BELT BUCKLE - REMOVAL, FRONT
. . 8O-20
SEAT BELT BUCKLE - REMOVAL, REAR
. . . 8O-27
SEAT BELT SWITCH - DESCRIPTION
.....8O-28
SEAT BELT SWITCH - DIAGNOSIS AND
TESTING
...........................8O-28
SEAT BELT SWITCH - OPERATION
.......8O-28
SEAT BELT TURNING LOOP ADJUSTER -
INSTALLATION
......................8O-29SEAT BELT TURNING LOOP ADJUSTER -
REMOVAL..........................8O-29
SEAT BELTS, SHOULDER BELTS,
RETRACTORS AND HEAD RESTRAINTS
- INSPECTION.......................30-12
SEAT CUSHION - INSTALLATION........23-138
SEAT CUSHION - REMOVAL...........23-138
SEAT CUSHION COVER - INSTALLATION . 23-139
SEAT CUSHION COVER - REMOVAL.....23-139
SEAT CUSHION COVER - SPLIT BENCH -
INSTALLATION......................23-140
SEAT CUSHION COVER - SPLIT BENCH -
REMOVAL.........................23-139
SEAT ELEMENT - DESCRIPTION, HEATED . 8G-10
SEAT ELEMENT - OPERATION, HEATED . . . 8G-10
SEAT ELEMENT AND SENSOR -
DIAGNOSIS & TESTING, HEATED........8G-11
SEAT HEATER SWITCH - DESCRIPTION,
DRIVER.............................8G-7
SEAT HEATER SWITCH - DESCRIPTION,
PASSENGER........................8G-13
SEAT HEATER SWITCH - INSTALLATION,
DRIVER.............................8G-9
SEAT HEATER SWITCH - INSTALLATION,
PASSENGER........................8G-16
SEAT HEATER SWITCH - OPERATION,
DRIVER.............................8G-7
SEAT HEATER SWITCH - OPERATION,
PASSENGER........................8G-14
SEAT HEATER SWITCH - REMOVAL,
DRIVER.............................8G-9
SEAT HEATER SWITCH - REMOVAL,
PASSENGER........................8G-15
SEAT RECLINER - DIAGNOSIS &
TESTING, POWER....................8N-21
SEAT RELAY - DESCRIPTION, HEATED....8G-11
SEAT RELAY - DIAGNOSIS & TESTING,
HEATED............................8G-12
SEAT RELAY - INSTALLATION, HEATED . . . 8G-13
SEAT RELAY - OPERATION, HEATED.....8G-12
SEAT RELAY - REMOVAL, HEATED.......8G-13
SEAT RISER - INSTALLATION..........23-141
SEAT RISER - REMOVAL..............23-141
SEAT SWITCH - DESCRIPTION, DRIVER
POWER............................8N-16
SEAT SWITCH - DESCRIPTION,
PASSENGER POWER..................8N-19
SEAT SWITCH - DIAGNOSIS & TESTING,
DRIVER POWER.....................8N-16
SEAT SWITCH - DIAGNOSIS & TESTING,
HEATED .......................8G-14,8G-8
SEAT SWITCH - DIAGNOSIS & TESTING,
PASSENGER POWER..................8N-19
SEAT SWITCH - INSTALLATION, DRIVER
POWER............................8N-17
SEAT SWITCH - INSTALLATION,
PASSENGER POWER..................8N-20
SEAT SWITCH - OPERATION, DRIVER
POWER............................8N-16
SEAT SWITCH - OPERATION,
PASSENGER POWER..................8N-19
SEAT SWITCH - REMOVAL, DRIVER
POWER............................8N-17
SEAT SWITCH - REMOVAL, PASSENGER
POWER............................8N-20
SEAT SYSTEM - DESCRIPTION, HEATED . . . 8G-5
SEAT SYSTEM - DESCRIPTION, POWER . . 8N-15
SEAT SYSTEM - DIAGNOSIS & TESTING,
HEATED.............................8G-6
SEAT SYSTEM - DIAGNOSIS & TESTING,
POWER............................8N-15
SEAT SYSTEM - OPERATION, HEATED.....8G-6
SEAT SYSTEM - OPERATION, POWER....8N-15
SEAT TRACK - DESCRIPTION, POWER....8N-21
SEAT TRACK - DIAGNOSIS & TESTING,
POWER............................8N-21
SEAT TRACK - INSTALLATION..........23-141
SEAT TRACK - INSTALLATION, EASY
ENTRY............................23-142
SEAT TRACK - INSTALLATION, POWER . . . 8N-22
SEAT TRACK - OPERATION, POWER.....8N-21
SEAT TRACK - REMOVAL.............23-141
SEAT TRACK - REMOVAL, EASY ENTRY
. . 23-142
SEAT TRACK - REMOVAL, POWER
.......8N-22
SEAT TRACK - SPLIT BENCH -
INSTALLATION
......................23-142
SEAT TRACK - SPLIT BENCH - REMOVAL
. 23-142
SEAT TRACK ADJUSTER - INSTALLATION
. 23-143
30 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

SEAT TRACK ADJUSTER - REMOVAL....23-143
SEATBELT INDICATOR - DESCRIPTION....8J-27
SEATBELT INDICATOR - OPERATION......8J-27
SEATS - CLEANING, INTAKE/EXHAUST
VALVES ...............9-140,9-198,9-27,9-84
SEATS - DESCRIPTION...............23-131
SEATS - DESCRIPTION, INTAKE/
EXHAUST VALVES . . 9-138,9-195,9-25,9-253,9-81
SEATS - INSPECTION.................30-13
SEATS - INSPECTION, INTAKE/EXHAUST
VALVES ...............9-141,9-198,9-27,9-84
SEATS - INSTALLATION, INTAKE/
EXHAUST VALVES.......9-141,9-260,9-28,9-85
SEATS - OPERATION.................23-131
SEATS - REMOVAL, INTAKE/EXHAUST
VALVES ...............9-140,9-258,9-27,9-84
SEATS - STANDARD PROCEDURE-
VALVES,GUIDES AND SPRINGS,
INTAKE/EXHAUST VALVES..............9-253
SEATS - VALVE SERVICE, INTAKE/
EXHAUST VALVES....................9-195
SECOND WEATHERSTRIP -
INSTALLATION, FRONT DOOR..........23-155
SECOND WEATHERSTRIP - REMOVAL,
FRONT DOOR......................23-154
SECURITY - DESCRIPTION, VEHICLE
THEFT..............................8Q-1
SECURITY - OPERATION, VEHICLE THEFT . . 8Q-2
SECURITY SYSTEM - DIAGNOSIS AND
TESTING, VEHICLE THEFT..............8Q-3
SELECTION-ADDITIVES - STANDARD
PROCEDURE, COOLANT..................7-17
SELECTOR INDICATOR - DESCRIPTION,
GEAR..............................8J-21
SELECTOR INDICATOR - OPERATION,
GEAR..............................8J-21
SENDING UNIT - DIAGNOSIS AND
TESTING, FUEL GAUGE.................14-8
SENDING UNIT / SENSOR -
DESCRIPTION, FUEL LEVEL........14-7,14-73
SENDING UNIT / SENSOR -
INSTALLATION, FUEL LEVEL.............14-9
SENDING UNIT / SENSOR - OPERATION,
FUEL LEVEL.....................14-7,14-73
SENDING UNIT / SENSOR - REMOVAL,
FUEL LEVEL..........................14-8
SENSE - DESCRIPTION, IGNITION
CIRCUIT............................8E-17
SENSE - OPERATION, IGNITION CIRCUIT . . 8E-19
SENSE - PCM INPUT - OPERATION, ASD . . . 8I-3
SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT
TEMP...............................7-48
SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT
TEMP...............................7-48
SENSOR - 3.9L/5.2L/5.9L - OPERATION,
ENGINE COOLANT TEMP................7-48
SENSOR - 3.9L/5.2L/5.9L - REMOVAL,
ENGINE COOLANT TEMP................7-48
SENSOR - DESCRIPTION, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - DESCRIPTION, AMBIENT
TEMP.............................8M-11
SENSOR - DESCRIPTION, BATTERY
TEMPERATURE......................8F-29
SENSOR - DESCRIPTION, FUEL LEVEL
SENDING UNIT..................14-7,14-73
SENSOR - DESCRIPTION, FUEL
TEMPERATURE......................14-99
SENSOR - DESCRIPTION, O2...........14-46
SENSOR - DESCRIPTION, SPEED . 21-253,21-424,
21-597,21-770
SENSOR - DESCRIPTION, THROTTLE
POSITION..........................14-51
SENSOR - DESCRIPTION,
TRANSMISSION TEMPERATURE . 21-262,21-433,
21-606,21-779
SENSOR - DESCRIPTION, WATER IN
FUEL
..............................14-85
SENSOR - DIAGNOSIS & TESTING,
AMBIENT TEMPERATURE
..............8M-12
SENSOR - DIAGNOSIS & TESTING,
HEATED SEAT ELEMENT
...............8G-11
SENSOR - INSTALLATION,
ACCELERATOR PEDAL POSITION
........14-93
SENSOR - INSTALLATION, AMBIENT
TEMP
.............................8M-13SENSOR - INSTALLATION, BATTERY
TEMPERATURE......................8F-29
SENSOR - INSTALLATION, FUEL LEVEL
SENDING UNIT.......................14-9
SENSOR - INSTALLATION, MAP........14-104
SENSOR - INSTALLATION, O2...........14-48
SENSOR - OPERATION, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - OPERATION, AMBIENT TEMP . . 8M-11
SENSOR - OPERATION, BATTERY
TEMPERATURE......................8F-29
SENSOR - OPERATION, FUEL LEVEL
SENDING UNIT..................14-7,14-73
SENSOR - OPERATION, FUEL
TEMPERATURE.....................14-100
SENSOR - OPERATION, O2.............14-46
SENSOR - OPERATION, SPEED . . 21-253,21-424,
21-597,21-770
SENSOR - OPERATION, THROTTLE
POSITION..........................14-51
SENSOR - OPERATION, TRANSMISSION
TEMPERATURE . . . 21-262,21-433,21-606,21-779
SENSOR - OPERATION, WATER IN FUEL . . 14-85
SENSOR - REMOVAL, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - REMOVAL, AMBIENT TEMP . . . 8M-12
SENSOR - REMOVAL, BATTERY
TEMPERATURE......................8F-29
SENSOR - REMOVAL, FUEL LEVEL
SENDING UNIT.......................14-8
SENSOR - REMOVAL, O2..............14-47
SENSOR - REMOVAL, WATER IN FUEL....14-85
SENSOR RETURN - DESCRIPTION.......8E-17
SENSOR/SWITCH - DESCRIPTION, OIL
PRESSURE.....................9-298,9-49
SENSOR/SWITCH - INSTALLATION, OIL
PRESSURE.........................9-299
SENSOR/SWITCH - OPERATION, OIL
PRESSURE.....................9-298,9-49
SENSOR/SWITCH - REMOVAL, OIL
PRESSURE.........................9-298
SEPARATOR - DESCRIPTION, FUEL
FILTER / WATER .....................14-59
SEPARATOR - INSTALLATION, FUEL
FILTER / WATER .....................14-61
SEPARATOR - OPERATION, FUEL FILTER
/ WATER ...........................14-59
SEPARATOR - REMOVAL, FUEL FILTER /
WATER.............................14-60
SERIES - INSTALLATION, REAR PARK
BRAKE CABLES - 1500.................5-39
SERIES - REMOVAL, REAR PARK BRAKE
CABLES - 1500.......................5-37
SERIES WITH DRUM BRAKES -
INSTALLATION, REAR PARK BRAKE
CABLE 2500/3500.....................5-39
SERIES WITH DRUM BRAKES -
REMOVAL, REAR PARK BRAKE
CABLES 2500/3500....................5-38
SERVO - ASSEMBLY, FRONT....21-208,21-379,
21-553,21-723
SERVO - ASSEMBLY, REAR.....21-251,21-422,
21-595,21-768
SERVO - CLEANING, FRONT
....21-207,21-378,
21-552,21-723
SERVO - CLEANING, REAR
.....21-251,21-422,
21-594,21-768
SERVO - DESCRIPTION, FRONT
. . 21-206,21-377,
21-551,21-722
SERVO - DESCRIPTION, REAR
. . . 21-250,21-421,
21-594,21-767
SERVO - DESCRIPTION, SPEED
CONTROL
...........................8P-5
SERVO - DISASSEMBLY, FRONT
. 21-207,21-378,
21-552,21-723
SERVO - DISASSEMBLY, REAR
. . 21-251,21-421,
21-594,21-768
SERVO - INSPECTION, FRONT
. . . 21-207,21-378,
21-553,21-723
SERVO - INSTALLATION, SPEED
CONTROL
..........................8P-10
SERVO - OPERATION, FRONT
. . . 21-207,21-377,
21-552,21-723
SERVO - OPERATION, REAR
....21-250,21-421,
21-594,21-767
SERVO - OPERATION, SPEED CONTROL
. . . 8P-5
SERVO - REMOVAL, SPEED CONTROL
.....8P-6SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT TO
GROUND ON FUSES POWERING......8W-01-7
SHAFT - ASSEMBLY, PLANETARY
GEARTRAIN/OUTPUT....21-241,21-412,21-588,
21-760
SHAFT - DESCRIPTION, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-410,21-585,
21-757
SHAFT - DESCRIPTION, PROPELLER.......3-1
SHAFT - DIAGNOSIS AND TESTING,
PROPELLER...........................3-3
SHAFT - DISASSEMBLY, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-411,21-586,
21-757
SHAFT - FRONT - INSTALLATION,
PROPELLER...........................3-8
SHAFT - FRONT - REMOVAL,
PROPELLER...........................3-8
SHAFT - INSPECTION, PLANETARY
GEARTRAIN/OUTPUT....21-241,21-411,21-587,
21-760
SHAFT - INSTALLATION, PITMAN........19-23
SHAFT - INSTALLATION, WORM.........19-29
SHAFT - OPERATION, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-410,21-585,
21-757
SHAFT - OPERATION, PROPELLER.........3-1
SHAFT - REAR - INSTALLATION,
PROPELLER...........................3-9
SHAFT - REAR - REMOVAL, PROPELLER....3-9
SHAFT - REMOVAL, PITMAN............19-22
SHAFT - REMOVAL, WORM............19-27
SHAFT - STANDARD PROCEDURES,
PROPELLER...........................3-5
SHAFT FRONT BEARING -
INSTALLATION, OUTPUT . 21-213,21-384,21-560,
21-730
SHAFT FRONT BEARING - REMOVAL,
OUTPUT.........21-213,21-384,21-559,21-730
SHAFT REAR BEARING - INSTALLATION,
OUTPUT.........21-213,21-384,21-560,21-731
SHAFT REAR BEARING - REMOVAL,
OUTPUT.........21-213,21-384,21-560,21-731
SHAFT SEAL - INSTALLATION, FRONT
OUTPUT...............21-852,21-886,21-922
SHAFT SEAL - INSTALLATION, PITMAN . . . 19-24
SHAFT SEAL - REMOVAL, FRONT
OUTPUT...............21-851,21-886,21-922
SHAFT SEAL - REMOVAL, PITMAN.......19-23
SHAFT SEALS - INSTALLATION, AXLE . 3-29,3-61,
3-94
SHAFT SEALS - REMOVAL, AXLE . 3-29,3-61,3-94
SHAFT, SPECIAL TOOLS - PROPELLER......3-8
SHAFT, SPECIFICATIONS - PROPELLER.....3-8
SHAFTS - INSTALLATION, AXLE....3-125,3-156,
3-185,3-28,3-60,3-93
SHAFTS - INTERMEDIATE -
INSTALLATION, AXLE..................3-28
SHAFTS - INTERMEDIATE - REMOVAL,
AXLE...............................3-28
SHAFTS - REMOVAL, AXLE . . 3-125,3-156,3-185,
3-28,3-60,3-93
SHIELD - INSTALLATION, REAR SPLASH . . 23-96
SHIELD - REMOVAL, REAR SPLASH......23-96
SHIELDS - DESCRIPTION, HEAT.........11-10
SHIELDS - INSTALLATION, FRONT END
SPLASH
............................23-92
SHIELDS - INSTALLATION, HEAT
........11-10
SHIELDS - REMOVAL, FRONT END
SPLASH
............................23-92
SHIELDS - REMOVAL, HEAT
............11-10
SHIFT BOOT - INSTALLATION, 4WD
FLOOR
............................23-122
SHIFT BOOT - MANUAL TRANSMISSION
- INSTALLATION
....................23-122
SHIFT BOOT - MANUAL TRANSMISSION
- REMOVAL
........................23-122
SHIFT BOOT - REMOVAL, 4WD FLOOR
. . . 23-122
SHIFT COVER - INSTALLATION
....21-133,21-90
SHIFT COVER - REMOVAL
.......21-132,21-90
SHIFT INDICATOR (TRANSFER CASE) -
DESCRIPTION
.......................8J-29
SHIFT INDICATOR (TRANSFER CASE) -
OPERATION
.........................8J-29
SHIFT LEVER - ADJUSTMENT
. . . 21-853,21-888,
21-925
BR/BEINDEX 31
Description Group-Page Description Group-Page Description Group-Page

SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................23-61
SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................13-9
SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................24-8
SPECIFICATIONS, TORQUE - FUEL
DELIVERY...........................14-4
SPECIFICATIONS, TORQUE - GAS FUEL
INJECTION..........................14-35
SPECIFICATIONS, TORQUE -
GENERATOR/CHARGING SYSTEM........8F-28
SPECIFICATIONS, TORQUE - IGNITION.....8I-2
SPECIFICATIONS, TORQUE - STARTING
SYSTEM............................8F-38
SPEED CONTROL - INSPECTION.........30-17
SPEED CONTROL SERVO - DESCRIPTION . . 8P-5
SPEED CONTROL SERVO -
INSTALLATION.......................8P-10
SPEED CONTROL SERVO - OPERATION....8P-5
SPEED CONTROL SERVO - REMOVAL.....8P-6
SPEED CONTROL SYSTEM -
DESCRIPTION........................8P-1
SPEED CONTROL SYSTEM - OPERATION . . . 8P-2
SPEED CONTROL SYSTEM - TORQUE.....8P-4
SPEED INPUT - DESCRIPTION, VEHICLE . . . 8P-1
SPEED SENSOR - DESCRIPTION . 21-253,21-424,
21-597,21-770
SPEED SENSOR - OPERATION . . . 21-253,21-424,
21-597,21-770
SPEEDOMETER - DESCRIPTION...........8J-30
SPEEDOMETER - OPERATION...........8J-30
SPLASH SHIELD - INSTALLATION, REAR . . 23-96
SPLASH SHIELD - REMOVAL, REAR......23-96
SPLASH SHIELDS - INSTALLATION,
FRONT END.........................23-92
SPLASH SHIELDS - REMOVAL, FRONT
END ...............................23-92
SPLICE LOCATIONS - DESCRIPTION . . . 8W-95-1
SPLICING - STANDARD PROCEDURE,
WIRE...........................8W-01-12
SPLIT BENCH - INSTALLATION, SEAT....23-134
SPLIT BENCH - INSTALLATION, SEAT
BACK.............................23-136
SPLIT BENCH - INSTALLATION, SEAT
BACK COVER.......................23-138
SPLIT BENCH - INSTALLATION, SEAT
CUSHION COVER....................23-140
SPLIT BENCH - INSTALLATION, SEAT
TRACK............................23-142
SPLIT BENCH - REMOVAL, SEAT.......23-134
SPLIT BENCH - REMOVAL, SEAT BACK . . 23-135
SPLIT BENCH - REMOVAL, SEAT BACK
COVER............................23-137
SPLIT BENCH - REMOVAL, SEAT
CUSHION COVER....................23-139
SPLIT BENCH - REMOVAL, SEAT TRACK . 23-142
SPOOL VALVE - INSTALLATION..........19-26
SPOOL VALVE - REMOVAL.............19-24
SPRING - DESCRIPTION........2-11,2-22,2-28
SPRING - INSTALLATION.......2-12,2-22,2-29
SPRING - OPERATION..........2-11,2-22,2-28
SPRING - REMOVAL...........2-11,2-22,2-28
SPRING AND SHOCK - DIAGNOSIS AND
TESTING............................2-26
SPRINGS - INSTALLATION, VALVES AND
VALVE .............................9-199
SPRINGS - REMOVAL, VALVES AND
VALVE .............................9-197
SPRINGS - STANDARD PROCEDURE,
VALVES, GUIDES.............9-138,9-25,9-82
SPRINGS, INTAKE/EXHAUST VALVES &
SEATS - STANDARD PROCEDURE-
VALVES,GUIDES.....................9-253
SPROCKETS - INSTALLATION, TIMING
BELT/CHAIN...........9-115,9-170,9-227,9-58
SPROCKETS - REMOVAL, TIMING
BELT/CHAIN...........9-114,9-170,9-226,9-57
SQUEAKS, RATTLES AND WIND NOISE -
INSPECTION........................30-15
STABILIZER BAR - DESCRIPTION . 2-12,2-22,2-30
STABILIZER BAR - INSTALLATION....2-12,2-23,
2-30
STABILIZER BAR - OPERATION
. . 2-12,2-22,2-30
STABILIZER BAR - REMOVAL
....2-12,2-22,2-30
STANCHION COVER - INSTALLATION
....23-143
STANCHION COVER - REMOVAL
........23-143
STANDARD CAB - INSTALLATION
........8O-19STANDARD CAB - REMOVAL...........8O-18
STARTER MOTOR - DESCRIPTION,
ENGINE............................8F-39
STARTER MOTOR - DIAGNOSIS AND
TESTING...........................8F-39
STARTER MOTOR - INSTALLATION,
ENGINE............................8F-41
STARTER MOTOR - OPERATION, ENGINE . . 8F-39
STARTER MOTOR - REMOVAL, ENGINE . . . 8F-40
STARTER MOTOR RELAY -
DESCRIPTION, ENGINE................8F-42
STARTER MOTOR RELAY -
INSTALLATION, ENGINE................8F-43
STARTER MOTOR RELAY - OPERATION,
ENGINE............................8F-42
STARTER MOTOR RELAY - REMOVAL,
ENGINE............................8F-43
STARTER RELAY - DIAGNOSIS AND
TESTING...........................8F-42
STARTING - DESCRIPTION.............8F-32
STARTING - OPERATION...............8F-32
STARTING - STANDARD PROCEDURE,
JUMP...............................0-27
STARTING SYSTEM - DIAGNOSIS AND
TESTING...........................8F-33
STARTING SYSTEM - SPECIFICATIONS,
TORQUE............................8F-38
STARTING SYSTEM, SPECIFICATIONS.....8F-38
STATE DISPLAY TEST MODE -
DESCRIPTION........................25-1
STATIONARY GLASS - DESCRIPTION....23-145
STATIONARY GLASS - OPERATION......23-145
STEERING - DESCRIPTION..............19-1
STEERING - OPERATION................19-1
STEERING AND HANDLING -
INSPECTION........................30-15
STEERING COLUMN OPENING COVER -
INSTALLATION......................23-116
STEERING COLUMN OPENING COVER -
REMOVAL.........................23-115
STEERING FLOW AND PRESSURE -
DIAGNOSIS AND TESTING, POWER.......19-4
STEERING GEAR HOUSING PLUG -
INSTALLATION.......................19-27
STEERING GEAR HOUSING PLUG -
REMOVAL..........................19-27
STEERING GEAR LEAKAGE - DIAGNOSIS
AND TESTING, POWER................19-14
STEERING GEAR, SPECIAL TOOLS -
POWER............................19-20
STEERING GEAR, SPECIFICATIONS -
POWER............................19-19
STEERING LINKAGE, SPECIAL TOOLS....19-39,
19-42
STEERING PUMP - INITIAL OPERATION -
STANDARD PROCEDURE, POWER.......19-31
STEERING PUMP, SPECIAL TOOLS -
POWER............................19-36
STEERING SYSTEM - DIAGNOSIS AND
TESTING, POWER.....................19-2
STEERING SYSTEM - STANDARD
PROCEDURE, FLUSHING POWER........19-32
STEERING WHEEL - INSTALLATION......19-13
STEERING WHEEL - REMOVAL..........19-13
STEM SEAL - INSTALLATION, VALVE.....9-198
STEM SEALS - REMOVAL, VALVE........9-197
STEPS - NEW VEHICLE PREPARATION
FORM, FINAL........................30-22
STOP LAMP - INSTALLATION, CENTER
HIGH MOUNTED......................8L-6
STOP LAMP - REMOVAL, CENTER HIGH
MOUNTED...........................8L-6
STOP LAMP UNIT - INSTALLATION,
CENTER HIGH MOUNTED...............8L-6
STOP LAMP UNIT - REMOVAL, CENTER
HIGH MOUNTED......................8L-6
STORAGE - DESCRIPTION, PRE
DELIVERY..........................30-19
STORAGE - STANDARD PROCEDURE,
PRE DELIVERY......................30-20
STORAGE BIN - INSTALLATION
.........23-116
STORAGE BIN - REMOVAL
............23-116
STOWAGE TRAY - INSTALLATION, REAR
FLOOR
............................23-121
STOWAGE TRAY - REMOVAL, REAR
FLOOR
............................23-121
STRAP - INSTALLATION, CAB-TO- BED
GROUND
...........................8A-14STRAP - INSTALLATION, ENGINE-TO-
BODY GROUND......................8A-13
STRAP - INSTALLATION, HEATER CORE
GROUND...........................8A-15
STRAP - REMOVAL, CAB-TO- BED
GROUND...........................8A-14
STRAP - REMOVAL, ENGINE-TO-BODY
GROUND...........................8A-13
STRAP - REMOVAL, HEATER CORE
GROUND...........................8A-14
STRETCH - INSPECTION, MEASURING
TIMING CHAIN........9-114,9-170,9-227,9-58
STRIKER - ADJUSTMENT, LATCH.......23-102
STRIKER - INSTALLATION, GLOVE BOX
LATCH ............................23-113
STRIKER - INSTALLATION, LATCH . 23-102,23-65,
23-73
STRIKER - LOWER - INSTALLATION,
LATCH .............................23-82
STRIKER - LOWER - REMOVAL, LATCH . . . 23-82
STRIKER - REMOVAL, GLOVE BOX
LATCH ............................23-113
STRIKER - REMOVAL, LATCH....23-102,23-65,
23-73
STRIKER - UPPER - INSTALLATION,
LATCH .............................23-82
STRIKER - UPPER - REMOVAL, LATCH . . . 23-82
STRIPE - INSTALLATION, TAPE..........23-88
STRIPE - REMOVAL, TAPE.............23-88
STRIPES AND DECALS - INSTALLATION,
BODY..............................23-87
STRIPES AND DECALS - REMOVAL,
BODY..............................23-87
STRUCTURAL ADHESIVE LOCATIONS,
SPECIFICATIONS.....................23-44
STUDS - INSTALLATION...............22-12
STUDS - REMOVAL...................22-12
SUCTION AND DISCHARGE LINE -
INSTALLATION.......................24-51
SUCTION AND DISCHARGE LINE -
REMOVAL..........................24-50
SUN VISOR - INSTALLATION..........23-127
SUN VISOR - REMOVAL..............23-127
SUPPLIES - DESCRIPTION, 5 VOLT......8E-17
SUPPLIES - OPERATION, 5 VOLT........8E-19
SUPPLY - DIAGNOSIS AND TESTING,
VACUUM............................8P-2
SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL..................14-56
SUPPORT - INSTALLATION, LUMBAR....23-133
SUPPORT - REMOVAL, LUMBAR.......23-133
SUPPORT BRACKET - INSTALLATION,
REARVIEW MIRROR.................23-126
SUPPORT PLATE - INSTALLATION........5-32
SUPPORT PLATE - REMOVAL............5-32
SUPPRESSION COMPONENTS -
DESCRIPTION, RADIO NOISE...........8A-12
SUPPRESSION COMPONENTS -
DIAGNOSIS AND TESTING, RADIO
NOISE.............................8A-12
SUSPENSION - STANDARD
PROCEDURES, ALIGNMENT LINK/COIL.....2-5
SUSPENSION, SPECIAL TOOLS -
INDEPENDENT FRONT...................2-9
SUSPENSION, SPECIAL TOOLS -
LINK/COIL...........................2-16
SUSPENSION-REAR, SPECIAL TOOLS.....2-28
SWITCH - DESCRIPTION
...............8P-12
SWITCH - DESCRIPTION, A/C HIGH
PRESSURE
.........................24-20
SWITCH - DESCRIPTION, A/C LOW
PRESSURE
.........................24-21
SWITCH - DESCRIPTION, BLOWER
MOTOR
............................24-24
SWITCH - DESCRIPTION, BRAKE LAMP
....8L-4
SWITCH - DESCRIPTION, CLUTCH
PEDAL POSITION
.....................6-22
SWITCH - DESCRIPTION, DOOR AJAR
....8L-34
SWITCH - DESCRIPTION, DOOR
CYLINDER LOCK
......................8N-5
SWITCH - DESCRIPTION, DRIVER
POWER SEAT
.......................8N-16
SWITCH - DESCRIPTION, DRIVER SEAT
HEATER
.............................8G-7
SWITCH - DESCRIPTION, HEADLAMP
....8L-18
SWITCH - DESCRIPTION, HORN
..........8H-4
SWITCH - DESCRIPTION, IGNITION
......19-11
BR/BEINDEX 33
Description Group-Page Description Group-Page Description Group-Page

TANK MODULE - DESCRIPTION, FUEL....14-78
TANK MODULE - INSTALLATION, FUEL....14-79
TANK MODULE - OPERATION, FUEL......14-78
TANK MODULE - REMOVAL, FUEL.......14-78
TAPE STRIPE - INSTALLATION..........23-88
TAPE STRIPE - REMOVAL..............23-88
TAPPETS - DIAGNOSIS AND TESTING,
HYDRAULIC............9-151,9-206,9-38,9-95
TASK MANAGER - DESCRIPTION........25-15
TASK MANAGER - OPERATION..........25-19
TEMP SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-48
TEMP SENSOR - DESCRIPTION,
AMBIENT..........................8M-11
TEMP SENSOR - INSTALLATION,
AMBIENT..........................8M-13
TEMP SENSOR - OPERATION, AMBIENT . . 8M-11
TEMP SENSOR - REMOVAL, AMBIENT . . . 8M-12
TEMPERATURE GAUGE - DESCRIPTION,
ENGINE............................8J-19
TEMPERATURE GAUGE - OPERATION,
ENGINE............................8J-19
TEMPERATURE SENSOR - DESCRIPTION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - DESCRIPTION,
FUEL..............................14-99
TEMPERATURE SENSOR - DESCRIPTION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - DIAGNOSIS &
TESTING, AMBIENT..................8M-12
TEMPERATURE SENSOR -
INSTALLATION, BATTERY..............8F-29
TEMPERATURE SENSOR - OPERATION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - OPERATION,
FUEL.............................14-100
TEMPERATURE SENSOR - OPERATION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - REMOVAL,
BATTERY...........................8F-29
TENSIONER - ADJUSTMENT, CABLE.......5-40
TENSIONER - DESCRIPTION, TIMING
BELT/CHAIN..........................9-57
TENSIONER - OPERATION, TIMING
BELT/CHAIN..........................9-57
TENSIONERS - 3.9L/5.2L/5.9L -
DESCRIPTION, BELT...................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
INSTALLATION, BELT...................7-20
TENSIONERS - 3.9L/5.2L/5.9L -
OPERATION, BELT.....................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
REMOVAL, BELT......................7-20
TENSIONERS - 5.9L DIESEL -
DESCRIPTION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
INSTALLATION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
OPERATION, BELT.....................7-23
TENSIONERS - 5.9L DIESEL - REMOVAL,
BELT ...............................7-23
TENSIONERS - 8.0L - DESCRIPTION,
BELT ...............................7-20
TENSIONERS - 8.0L - INSTALLATION,
BELT ...............................7-22
TENSIONERS - 8.0L - OPERATION, BELT . . . 7-20
TENSIONERS - 8.0L - REMOVAL, BELT.....7-21
TERMINAL - INSTALLATION.........8W-01-11
TERMINAL - REMOVAL.............8W-01-11
TEST - DIAGNOSIS AND TESTING, FUEL
INJECTOR.....................14-53,14-95
TEST - DIAGNOSIS AND TESTING, FUEL
PRESSURE LEAK DOWN
................14-2
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP AMPERAGE
....................14-10
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP CAPACITY
......................14-9
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP PRESSURE
....................14-10
TEST - DIAGNOSIS AND TESTING,
HYDRAULIC PRESSURE
. . 21-144,21-315,21-487,
21-658TEST - DIAGNOSIS AND TESTING,
POWR-LOKY........................3-161
TEST - DIAGNOSIS AND TESTING, ROAD . . . 8P-3
TEST - INSPECTION WINDSHIELD
WIPERS/WASHERS, ROAD.............30-18
TEST - STANDARD PROCEDURE,
BUILT-IN INDICATOR..................8F-11
TEST - STANDARD PROCEDURE,
HYDROMETER.......................8F-12
TEST - STANDARD PROCEDURE,
IGNITION-OFF DRAW..................8F-15
TEST - STANDARD PROCEDURE, LOAD . . . 8F-14
TEST - STANDARD PROCEDURE,
OPEN-CIRCUIT VOLTAGE...............8F-13
TEST - STANDARD PROCEDURE,
VERIFICATION........................8O-5
TEST INSPECTION - DESCRIPTION,
ROAD..............................30-15
TEST MODE - DESCRIPTION, CIRCUIT
ACTUATION..........................25-1
TEST MODE - DESCRIPTION, STATE
DISPLAY............................25-1
TETHER - INSTALLATION, CHILD.........8O-9
TETHER - REMOVAL, CHILD.............8O-9
THEFT SECURITY - DESCRIPTION,
VEHICLE............................8Q-1
THEFT SECURITY - OPERATION, VEHICLE . . 8Q-2
THEFT SECURITY SYSTEM - DIAGNOSIS
AND TESTING, VEHICLE................8Q-3
THERMOSTAT - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-50
THERMOSTAT - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-49
THERMOSTAT - 5.9L DIESEL -
DESCRIPTION, ENGINE COOLANT.........7-54
THERMOSTAT - 5.9L DIESEL -
INSTALLATION, ENGINE COOLANT........7-55
THERMOSTAT - 5.9L DIESEL -
OPERATION, ENGINE COOLANT..........7-54
THERMOSTAT - 5.9L DIESEL -
REMOVAL, ENGINE COOLANT............7-55
THERMOSTAT - 8.0L - DESCRIPTION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - INSTALLATION,
ENGINE COOLANT.....................7-53
THERMOSTAT - 8.0L - OPERATION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - REMOVAL,
ENGINE COOLANT.....................7-52
THERMOSTAT - DIAGNOSIS AND
TESTING....................7-49,7-52,7-54
THOMAS AND BETTS - INSTALLATION,
CONNECTOR.....................8W-01-10
THOMAS AND BETTS - REMOVAL,
CONNECTOR......................8W-01-9
THREAD REPAIR - STANDARD
PROCEDURE, ALUMINUM......21-159,21-330,
21-502,21-673
THREADED HOLE REPAIR -
DESCRIPTION......................Intro.-6
THREADS - STANDARD PROCEDURE,
REPAIR DAMAGED OR WORN . 9-11,9-125,9-181,
9-238,9-68
THROTTLE BODY - DESCRIPTION........14-48
THROTTLE BODY - OPERATION.........14-48
THROTTLE CONTROL CABLE -
INSTALLATION.................14-105,14-50
THROTTLE CONTROL CABLE -
REMOVAL....................14-104,14-50
THROTTLE POSITION SENSOR -
DESCRIPTION.......................14-51
THROTTLE POSITION SENSOR -
OPERATION.........................14-51
THROTTLE VALVE CABLE -
ADJUSTMENTS, TRANSMISSION
. 21-254,21-425,
21-598,21-771
THROTTLE VALVE CABLE -
DESCRIPTION
....21-253,21-424,21-597,21-770
TIMER MODULE - DESCRIPTION, BODY
CONTROL/CENTRAL
...................8E-1
TIMER MODULE - DIAGNOSIS AND
TESTING, CENTRAL
....................8E-4
TIMER MODULE - INSTALLATION, BODY
CONTROL/CENTRAL
...................8E-6TIMER MODULE - OPERATION, BODY
CONTROL/CENTRAL...................8E-3
TIMER MODULE - REMOVAL, BODY
CONTROL/CENTRAL...................8E-5
TIMING - DIAGNOSIS AND TESTING,
FUEL INJECTION PUMP...............14-66
TIMING BELT / CHAIN COVER(S) -
INSTALLATION........9-113,9-169,9-226,9-56
TIMING BELT / CHAIN COVER(S) -
REMOVAL............9-113,9-169,9-225,9-56
TIMING BELT/CHAIN AND SPROCKETS -
INSTALLATION........9-115,9-170,9-227,9-58
TIMING BELT/CHAIN AND SPROCKETS -
REMOVAL............9-114,9-170,9-226,9-57
TIMING BELT/CHAIN TENSIONER -
DESCRIPTION........................9-57
TIMING BELT/CHAIN TENSIONER -
OPERATION..........................9-57
TIMING CHAIN STRETCH - INSPECTION,
MEASURING..........9-114,9-170,9-227,9-58
TIMING, SPECIFICATIONS - IGNITION......8I-3
TIPS - CLEANING, APPEARANCE........30-21
TIRE - DESCRIPTION, SPARE............22-9
TIRE AND WHEEL BALANCE -
STANDARD PROCEDURES...............22-4
TIRE AND WHEEL RUNOUT - DIAGNOSIS
AND TESTING........................22-1
TIRE NOISE OR VIBRATION - DIAGNOSIS
AND TESTING........................22-8
TIRE PRESSURES - INSPECTION.........30-8
TIRE REVOLUTIONS PER MILE,
SPECIFICATIONS......................22-9
TIRE ROTATION - STANDARD
PROCEDURES........................22-2
TIRE WEAR PATTERNS - DIAGNOSIS
AND TESTING........................22-7
TIRE WINCH - INSTALLATION, SPARE....13-10
TIRE WINCH - REMOVAL, SPARE........13-10
TIRES - DESCRIPTION.............22-5,22-6
TO GROUND - STANDARD PROCEDURE,
TESTING FOR A SHORT.............8W-01-6
TO GROUND ON FUSES POWERING
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT....8W-01-7
TO OIL COOLER - INSTALLATION, AIR.....7-88
TO OIL COOLER - REMOVAL, AIR.........7-87
TO OIL COOLER - REMOVAL, WATER......7-87
TO USE WIRING DIAGRAMS -
DESCRIPTION, HOW................8W-01-1
TOOLS - 5.2L ENGINE, SPECIAL..........9-77
TOOLS - 5.9L DIESEL ENGINE, SPECIAL . . 9-244
TOOLS - 5.9L ENGINE, SPECIAL.........9-134
TOOLS - 8.0L ENGINE, SPECIAL.........9-188
TOOLS - AUDIO SYSTEMS, SPECIAL......8A-4
TOOLS - BASE BRAKES, SPECIAL.........5-4
TOOLS - COOLING, SPECIAL.............7-18
TOOLS - DIESEL FUEL SYSTEM,
SPECIAL...........................14-59
TOOLS - FRONT AXLE, SPECIAL..........3-58
TOOLS - FRONT AXLES, SPECIAL.........3-25
TOOLS - FUEL SYSTEM, SPECIAL . . . 14-36,14-4
TOOLS - HEADLAMP ALIGNMENT,
SPECIAL............................8L-4
TOOLS - INDEPENDENT FRONT
SUSPENSION, SPECIAL..................2-9
TOOLS - LINK/COIL SUSPENSION,
SPECIAL
............................2-16
TOOLS - NV5600 MANUAL
TRANSMISSION, SPECIAL
.............21-127
TOOLS - OVERHEAD CONSOLE
SYSTEMS, SPECIAL
...................8M-8
TOOLS - POWER DISTRIBUTION
SYSTEMS, SPECIAL
................8W-97-2
TOOLS - POWER STEERING GEAR,
SPECIAL
...........................19-20
TOOLS - POWER STEERING PUMP,
SPECIAL
...........................19-36
TOOLS - PROPELLER SHAFT, SPECIAL
......3-8
TOOLS - RE TRANSMISSION, SPECIAL
. . 21-534,
21-704
TOOLS - RE TRANSMISSIONS, SPECIAL
. 21-188,
21-359
TOOLS - STEERING LINKAGE, SPECIAL
. . . 19-39,
19-42
TOOLS - SUSPENSION-REAR, SPECIAL
....2-28
TOOLS, AIRBAG SYSTEM - SPECIAL
......8O-6
TOOLS, WIRING/TERMINAL - SPECIAL
. 8W-01-8
BR/BEINDEX 35
Description Group-Page Description Group-Page Description Group-Page