2000 TOYOTA CAMRY maintenance schedule

Determining the Proper
Maintenance Interval
Depending on your circumstances, you should obtain mainte-
nance for your Toyota every 5, 000 miles or every 7, 500 miles.
Follow these guidelines to determine which interval to use.
5,000-Mile Intervals
Use 5, 000- mile intervals if you primarily operate your vehicle
under any of the following conditions:
•Driving on unpaved or dusty roads.
•Towing a trailer or using a camper or car- top carrier.
•Repeated trips of less than five miles in temperatures
below freezing.
7,500-Mile Intervals
Use 7, 500- mile intervals if you primarily operate your vehicle
under conditions other than those listed above.
Following the Maintenance Log Charts
The Scheduled Maintenance Log identifies the maintenance
required at each mileage interval and corresponding time interval
based on mileage of 1, 250 miles per month. If you drive more than
1, 250 miles per month, you should obtain maintenance at the indi-
cated mileage interval rather than the indicated time interval.
If you choose 5,000- mile intervals, follow the maintenance
instructions shown below non- shaded headings such as this one:
5,000 Miles or 4 Months
If you choose 7, 500- mile intervals, follow the maintenance
instructions shown below shaded headings such as this one:
7, 500 Miles or 6 Months
At 15,000- mile increments, the 5,000- mile and 7, 500- mile
intervals coincide. Therefore, shaded and non- shaded headings
appear together, as in this example:
15,000 Miles or 12 Months
15,000 Miles or 12 Months
Determining Your Vehicle’s Maintenance Needs
SCHEDULED MAINTENANCE LOGS17

SCHEDULED MAINTENANCE LOGS18
Determining Your Vehicle’s Maintenance Needs
Special Operating Conditions
In addition to standard maintenance items, the Scheduled
Maintenance Log indicates services that should be performed
on vehicles that are driven under especially demanding condi-
tions. Specific conditions require specific services, as indicated
below. The Scheduled Maintenance Log indicates at which
mileage/time intervals each service should be performed.
You should perform these additional maintenance services if
you drive
primarilyunder any of the conditions noted. If you
drive only occasionally under these conditions, it is not neces-
sary to perform the additional services.
Driving on Rough, Muddy or Snow-Melted Roads
•Rotate tires
•Inspect ball joints and dust cover
•Inspect brake linings/drums and brake pads/discs
•Inspect drive shaft boots
•Inspect nuts and bolts on chassis and body
•Inspect steering linkage
•Re- torque drive shaft flange bolts*
•Lubricate propeller shaft and re- torque bolts*
Driving on Salt-Covered Roads
•Lubricate propeller shaft and re- torque bolts*
Driving on Unpaved or Dusty Roads
•Inspect brake linings/drums and brake pads/discs
•Inspect or change engine air filter
•Lubricate propeller shaft and re- torque bolts *
Extensive Idling or Low-Speed Driving
for Long Distances
•Inspect brake linings/drums and brake pads/discs
* Applies to selected models. See the Scheduled Maintenance Log for details.

SCHEDULED MAINTENANCE LOGS19 Towing a Trailer or Using a Camper
or Car-Top Carrier
•Inspect brake linings/drums and brake pads/discs
•Inspect nuts and bolts on chassis and body
•Replace differential oil
•Replace transmission fluid or oil
•Replace transfer oil *
•Lubricate propeller shaft and re- torque bolts*
Off-Road Maintenance
If you own a Land Cruiser or a four- wheel drive RAV4,
Tacoma or 4Runner, you should check the following items
daily whenever you drive off- road through deep sand, mud
or water:
•Brake lines and hoses
•Brake linings/drums and brake pads/discs
•Engine air filter
•Differential oil
•Steering linkage
•Transfer oil
•Transmission fluid or oil
•Wheel bearings
For all four- wheel drive vehicles except RAV4, you should
also lubricate the propeller shafts daily.
Determining Your Vehicle’s Maintenance Needs

SCHEDULED MAINTENANCE LOGS20
The following descriptions are provided to give you a better
understanding of the maintenance items that should be per-
formed on your vehicle. The Scheduled Maintenance Log
indicates at which mileage/time intervals each item should be
performed. Please note that many maintenance items should be
performed only by a qualified technician.
For further information on maintenance items you can per-
form yourself, see the “General Maintenance and Care” and
“Do- It-Yourself Maintenance” sections of your
Owner’s Manual.
Automatic Transmission Fluid
or Manual Transmission Oil
Inspect each component for signs of leakage. If you discover any
leakage, have it repaired by a qualified technician immediately.
Ball Joints and Dust Covers
Check the suspension and steering linkage ball joints for loose-
ness and damage. Check all dust covers for deterioration and
damage. A qualified technician should perform these inspections.
Brake Lines and Hoses
Visually inspect for proper installation. Check for chafing,
cracks, deterioration and evidence of leaking. Replace any deteri-
orated or damaged parts immediately. A qualified technician
should perform these operations.
Explanation of Maintenance Items

SCHEDULED MAINTENANCE LOGS21 Brake Linings/Drums and Brake Pads/Discs
Check the brake linings (shoes) and drums for scoring, burning,
fluid leakage, broken parts and excessive wear. Check the pads for
excessive wear and the discs for runout, excessive wear and fluid
leakage. A qualified technician should perform these inspections.
Charcoal Canister (CA, MA and NY vehicles)
Check for internal damage and clogging. If necessary, clean
with compressed air or replace. A qualified technician should
perform these operations.
Differential Oil
Inspect each component for signs of leakage. If you discover any
leakage, have it repaired by a qualified technician immediately.
Drive Belts
Inspect for cracks, excessive wear and oiliness. Check the belt ten-
sion and adjust if necessary. Replace the belts if they are damaged.
Drive Shaft Boots
Check the drive shaft boots and clamps for cracks, deteriora-
tion and damage. Replace any damaged parts and, if necessary,
repack the grease. Selected models also require periodic inspec-
tion of the flange bolts for proper torque. A qualified technician
should perform these operations.
Engine Air Filter
Check for damage, excessive wear and oiliness. Replace if necessary.
Engine Coolant
Drain and flush the cooling system and refill with an ethylene-
glycol type coolant. A qualified technician should perform
this operation.
Engine Oil and Oil Filter
Change the oil filter and replace the engine oil with API SH,
Energy- Conserving II multigrade or ILSAC multigrade oil.
For recommended viscosity, refer to your
Owner’s Manual.
Explanation of Maintenance Items

SCHEDULED MAINTENANCE LOGS22Engine Valves
Inspect for excessive lifter noise and engine vibration and adjust if
necessary. A qualified technician should perform this operation.
Exhaust Pipes and Mountings
Visually inspect the exhaust pipes, muffler and hangers for
cracks, deterioration and damage. Start the engine and listen
carefully for any exhaust gas leakage. Tighten connections or
replace parts as necessary.
Fuel Lines and Connections, Fuel Tank Band
and Fuel Tank Vapor Vent System Hoses
Visually inspect for corrosion, damage, cracks and loose or leaking
connections. Tighten connections or replace parts as necessary.
Fuel Tank Cap Gasket
Visually inspect for cracks, deterioration and damage and
replace if necessary.
Nuts and Bolts on Chassis and Body
Re- tighten the seat mounting bolts and front/rear suspension
member retaining bolts to specified torque.
Propeller Shaft
Lubricate the propeller shaft spiders and slide yokes with
lithium- base chassis grease and the double cardan joint with
molybdenum- disulfide lithium- base chassis grease, and re-
torque the flange bolts. Only a qualified technician should
re- torque the flange bolts.
Spark Plugs
Install new plugs of the same type as originally equipped. A
qualified technician should perform this operation.
Steering Gear Box
Inspect for signs of leakage. If you discover any leakage, have it
repaired immediately by a qualified technician.
Explanation of Maintenance Items

Steering Linkage
With the vehicle stopped, check for excessive freeplay in the steer-
ing wheel. Inspect the linkage for bending and damage and the dust
boots for deterioration, cracks and damage. Replace any damaged
parts. A qualified technician should perform these operations.
Timing Belt
Replace every 90,000 miles. A qualified technician should per-
form this operation.
Tire Rotation
Tires should be rotated according to the instructions in the
Owner’s Manual. When rotating tires, check for damage and
uneven wear.
Transfer Case Oil
Inspect each component for signs of leakage. If you discover any
leakage, have it repaired by a qualified technician immediately.
Wheel Bearing and Drive Shaft Bushing Grease
Repack the wheel bearings with wheel bearing grease and the
front drive shaft bushings with molybdenum- disulfide lithium-
base chassis grease. A qualified technician should perform
these operations.
Explanation of Maintenance Items
SCHEDULED MAINTENANCE LOGS23

Maintenance Log.
. Cars & Sienna
SCHEDULED MAINTENANCE LOGS24
5,000 Miles or 4 Months
❑Replace engine oil and oil filter
Additional Maintenance Items for Special Operating Conditions:*
❑Inspect the following:__
Ball joints and dust covers__
Engine air filter
__
Brake linings/drums and brake pads/discs__
Nuts and bolts on chassis and body
__
Drive shaft boots__
Steering linkage
❑Rotate tires
❑Re-torque drive shaft flange bolts (Sienna)
Date:
Mileage:
10,000 Miles or 8 Months
❑Replace engine oil and oil filter
Additional Maintenance Items for Special Operating Conditions:*
❑Inspect the following:__
Ball joints and dust covers__
Engine air filter
__
Brake linings/drums and brake pads/discs__
Nuts and bolts on chassis and body
__
Drive shaft boots__
Steering linkage
❑Rotate tires
❑Re-torque drive shaft flange bolts (Sienna)
Date:
Mileage:
❑Replace engine oil and oil filter
❑Rotate tiresDate:
Mileage:
7,500 Miles or 6 Months
DEALER SERVICE VERIFICATIONDEALER SERVICE VERIFICATION
DEALER SERVICE VERIFICATION
5,000-Mile Maintenance Intervals
7,500-Mile Maintenance Intervals
* Specific services apply to specific operating conditions. See pages 18–19 for details.To determine the appropriate
maintenance interval for your vehicle,
see page 17.